bending force的例句大全

the improper clamping fixture material and clamping force are the main reasons for the fin bending.

夹具的材料和夹紧力的大小不合适是导致翅片弯曲倒伏的主要原因。

A warping, bending, or cracking, as that by excessive force.

翘曲, 弯曲,裂开:翘曲 、 弯曲或裂开, 如过强的外力引起.

Axial force has a great effect on deformation of rod or tubing with initial bending stress.

轴向力对具有初弯曲的杆(管)柱变形影响很大.

Therefore, the bending moment may cause normal stress at the axis of gravity, and the concept of equivalent axial force is induced.

因此弯矩在形心处要引起正应力，从而引出所谓等效轴力的概念。

During the pipeline running , thanks to the axial force line may become sinusoidal or spiral bending.

由于轴向力的存在,管柱还可能发生正弦或螺旋屈曲等.

By integrating the function, the shear force, bending moment and the angle of rotation of the whole beam are expressed by one equation respectively.

通过积分，全梁的剪力、弯矩、转角和挠度可分别用一个方程表示。

Inland Vessel External Force Calculation with the Correction of Bending Deflection

内河船舶考虑弯曲挠度影响的外力计算

It firstly derivates theoretical analysis formula of force and stroke by using beam bending theory and energy method.

首次采用梁的弯曲理论和能量法结合的方法推导了弯曲力和行程的理论解析公式。

The forced diogram of sulfur recovery condenser with asymmetric arrangement triple-saddle support is analyzed and simplified in this paper, and the mathematical formula for computing the counter force and axial bending moment of each support is presented for design reference.

通过对非对称布置三鞍座硫回收冷凝器的受力分析及简化，提出了计算各支座反力和轴向弯矩的数学公式，供设计时参考。

After the key column fails, the internal force is redistributed by the catenary action of the joints to prevent the progressive collapse of structures, while the joints are under the state of bending moment combined with tensional force.

结构体系中当关键柱破坏后，体系将通过节点的悬索作用实现内力的重新分配，防止结构出现连续倒塌，此时节点将承受弯矩和拉力的共同作用。

Shear force is implicit in the development of bending moments.

杆中的剪力在弯矩的推导中是不明显的.

A motion law of the disintegrative units is obtained by analyzing the internal force and bending moment of the architectural units.

通过分析建筑物构件的内力和弯矩，得到了建筑物解体时构件的运动规律。

Sampling Direction: Transverse on tensile force and cold bending samples vertical on impact samples.

2取样方向: 拉力、冷弯样为横向,冲击样为纵向.

Bending deformation of microscale cantilever has been investigated using an atomic force microscope ( AFM ) .

采用原子力显微镜测试了微悬臂梁构件的弯曲 变形规律.

resilient metal barriers can absorb shock by bending and dispersing kinetic force.

具有弹性的金属围栏可以通过弯曲和分散动能来吸收冲击。

Asymptotic Solutions for Twisting and Bending Vibration of Thin-Walled Beam Bridge under Horizontal Seismic Force with Nonlinear Damping

水平地震时具有非线性阻尼的薄壁梁桥弯扭振动的渐近解

The Loading Capacity of Three Point Bending Beam With the Resistant Force of Cohesive Crack

黏聚裂纹阻抗的弯曲梁承载力

When three point bending test was made under the 300N compressive force, the maximum tensile strain was at the medial point of middle femur, average 1.18E~ 03 ( mm/ mm).

三点弯曲在300N压力时，股骨中间1/2端，内侧点为最大张应变，平均值为1.18E-03（mm/mm）。

Exercise. the properties and thrust force of bending motion

屈曲运动的推进力及其特性

According to small deflection theory and principle of superposition, the normal stress due to bending and axial force may be treated separately.

单索面斜拉桥承受弯矩与轴力的共同作用，根据小变形理论与叠加原理。