binder的例句大全

Using phenylethylene-acrylic ester emulsion as the binder, and tetramethylolmethane, trimeric cyanamide, ammonium biphosphate and titanic oxide as fire protection additive and assistant, aqueous ostentatious one pack fire retardant coat-ings of steel structure with thin coating is prepared.

以苯丙乳液为基料，以季成四醇、三聚氰胺、磷酸二氢铵、二氧化钛等为防火添加剂及其它助剂，研制成薄型单组分钢结构饰面型水性防火涂料。

This form of attack directly leads to the decomposition of CSH gel and formation of the non-binder thaumasite crystal in the cement paste. As a result, the attacked concrete becomes a white mushy and friable mixture.

它直接导致水泥石中CSH凝胶体的分解，生成无任何胶结性的硅灰石膏（thaumasite）晶体，使混凝土最终变为一种白色的烂泥状混合物。

Relationship between penetration grade and performance high temperature grade of conventional asphalt binder

常规沥青的针入度等级和PG高温等级间的关系

Rheological indexes assess high temperature stability of asphalt binder and asphalt mixture

用流变模型评价改性沥青及其混合料的高温性能

The factors which affect the tensile modulus of solid composite propellant are discussed from four aspects: fillers, binder, filler/ binder interaction and processing technology, and the approaches are proposed to tailor the initial tensile modulus of composite solid propellant.

从填料、粘合剂、界面作用和工艺四个方面对影响复合固体推进剂模量的因素进行了讨论，提出了调节复合固体推进剂模量的技术途径。

An investigation for nonwoven fabrics with various amount of powder binder shows that the tensile and stress relaxation properties of nonwoven fabrics may be described by using a linear or non-linear three elements mechanical models well.

对不同粉末粘结剂含量非织造布的研究表明：线性和非线性的简易三元件模型均能较好地描述非织造布的拉伸性能和应力松弛性能。

The thermoplastic acrylic resin with a certain glass transition temperature was prepared by choosing reasonable ratio of monomers. As the coatings binder for ABS plastics, It has good physical property and alcohol resistance.

通过选择合理的原料单体配比制备具一定玻璃化温度的热塑性丙烯酸树脂，作为ABS塑料用涂料的基料，具有较好的物理性能以及优良的耐醇性。

Improved thermoplastic compound phenolic resin was prepared with a certain proportion of nanometer and submicron minerals that had good thermal stability as the carrier and by mechano-chemical improvement, which was used as the binder of automobile-use friction material.

以一定比例热稳定性好的纳米、亚微米矿物为载体，经机械力化学改性处理，制备成热塑性复合改性酚醛树脂，用作汽车摩擦材料的粘结剂。

Thermoplastic polyester resin is polyethylene terephthalate ( PBT) compounds based binder polymer semi-crystalline materials.

热塑性聚酯树脂是以聚对苯二甲酸丁二酯（PBT）聚化物为主基料的半结晶材料。

Carbon brush ⅰ and ⅱ using foliate graphite A and B respectively were prepared under the same technological conditions and with modified thermosetting resin as binder.

用改性热固性树脂作粘结剂，分别用A和B两种鳞片石墨作原料，采用相同的工艺条件制得和两种炭刷坯体。

Study on the relationship of polymer binder's chemical structure and their thermostability

用力学方法研究聚合物粘结剂的化学结构与热稳定性

The solvent debinding process was studied, including the relationship of binder loss with solvent composition, debinding time, sample thickness, and solvent debinding temperature and so on.

研究了溶剂脱脂中脱脂率与溶剂、脱脂时间、样品厚度和溶剂温度等参数的关系。

But the bonding forces of the interface are influenced by the binder, and Van der Waal force is a dominant force when polymer agent is used.

但界面作用力受界面剂的影响极大，在某些情况下，如采用聚合物界面剂时，则以范德华力起主导作用；

The compressive and flexural strength of styrene-butadiene rubber ( SBR), polyacrylic ester ( PAE) and polystyrene-acrylate latex ( SAE) modified self-levelling mortars with different polymer binder ratio at different ages were compared.

研究了不同掺量的丁苯乳液（SBR）、丙烯酸酯乳液（PAE）和苯丙乳液（SAE）对自流平砂浆不同龄期下的抗压、抗折强度的影响。

The Effect of Dihydrate Gypsum on Properties of Marine Engineering High Performance Composite Binder

二水石膏对海工高性能复合胶凝材料性能的影响

The production of hairdressing scissors which are produced by a metal injection moulding route, using a 440 type hardenable stainless steel powder and a PEG/ PMMA composite binder system has been investigated.

用金属粉末注射成型的方法制备高硬度合金剪刀，其喂料使用440型不锈钢粉末和PEG/PMMA复合粘结剂制成。

The physical pattern and mechanical property of residual binder film on the used sodium silicate sand under different temperature were studied by the numbers.

对不同受热温度下水玻璃旧砂粒上残留粘结剂膜的物理形貌及力学性能进行了较系统的试验研究。

The ablation resistance was obtained due to the combined action of both the high strength cermet with the durability to erosion and high temperature and the metal binder, Cu, performing decalescence and volatilization at high temperature.

材料的抗烧蚀机理为耐高温、耐冲刷的高强度陶瓷骨架以及高温下挥发吸热的金属Cu粘接剂，二者的综合作用使材料具有抗烧蚀性。

Binder Cover and Side Label shall be printed on cardboard and inserted in Binder's front and side transparent pocket ( See Front Label and Side Label master here attached).

文件夹封面及侧面的标签应打印在硬纸板上、插入文件夹封面及侧面的透明袋中（见所附封面及侧面标签）。

The result shows that different mineral binder composition and different EPS grain have great influence on performance of EPS thermal insulation mortar.

结果表明，在聚苯颗粒保温浆料中胶粉料材料组成不同、采用的聚苯颗粒不同，对聚苯颗粒保温浆料的性能有很大的影响。