bond strength的例句大全

Research on Bond Strength and Bond Form of Agar/ Alginate Hydrocolloid Impression System

琼脂/藻酸钠双重印模间结合力及其结合形式

Results showed that the bond strength of adhesive containing NaF decreased sharply although their fluoride releases were higher.

结果表明，虽然含有NaF的粘接剂释放氟离子量较大，但加入NaF后粘接剂的粘接强度急剧下降；

A theoretical approach to the hydrogen bond strength distribution in polyurethanes

对聚氨酯中氢键强度分布的理论探讨

Finite element evaluation of a test standard for coating shear bond strength determination

对一种涂层剪切结合强度测定方法的有限元评价

Characterization of Interfacial Adhesion and Bond Strength between Thin Film Coating and Substrate by Scratch Testing

划痕试验法表征薄膜涂层界面结合强度

This shows that in the high temperature cycle, salt, high temperature water environment and ultraviolet radiation, the bond strength of Epoxy Resin adhesive both are relatively stable.

这说明环氧树脂类粘结剂在高低温循环、盐雾、高温水环境、紫外光的照射下，其粘结强度都比较稳定。

Analysis and Calculation of the Bond Strength of Bimetal for Cold Welding

双金属冷压焊固相结合强度的分析和计算

In this paper, carbon fiber is trated with the surface liquid phase oxidation method, and its effect on the tensile strength and bond strength of titanium diboride coating cathode is investigated.

本文研究了不同工艺的液相碳纤维表面氧化处理法对硼化钛阴极涂层抗拉强度和粘接强度的影响。

The content of surface oxygen-containing groups on the treated the carbon fiber is analyzed with FTIR, and its effect on the properties of titanium diboride coating is discussed, to effectively improve the tensile strength and bond strength of titanium diboride coating cathode.

采用FTIR检测碳纤维处理后表面含氧基团的变化，寻找影响硼化钛阴极涂层性能的原因，从而达到最有效地提高TiB2阴极涂层抗拉强度和粘接强度的目的。

Conclusion: The bond strength between IPS-Empress 2 dental ceramic and resin can reach the maximum when etching for 20 seconds.

结论：9.6%氢氟酸酸蚀20s能使IPS-Empress2陶瓷与树脂之间达到最大粘结强度。

While the test of the thermal shock resistance and bond strength indicate the gradient membrane prepared in this experiment has well thermal stability and bonding with the support, to ensure its use in rigorous environments.

对梯度膜的抗热震性能及结合强度进行的测试证明本试验中所制备的梯度膜热稳定性能良好，膜层与基体具有大的粘合力，能保证其在较为苛刻的环境下使用。

From the point of bond strength and thermal shock test, three coatings are suitable to the cylinder liner.

从涂层结合强度、热震性等方面考虑，三种涂层都完全符合气缸套的工况环境。

The chemical bond energy of a molecule is the one of the its thermochemical properties. The bond strength can measure the stability of the molecule. The bond energies can control the rate of many reactions and determine the chemical reaction mechanism.

分子中的化学键能是分子的热化学性质之一，键的强弱可以用来度量分子的化学稳定性的高低，键能值的高低基本上控制了许多反应速度的快慢，也确定了相应化学反应的机理。

The bond strength of the samples was measured by three point bending test.

采用三点弯曲法测试金瓷结合力，扫描电镜观察钛瓷界面。

The coating with high bond strength was synthesized by means of treatment of the gradient liquid phase sintering or medium temperature reactive sintering.

通过梯度液相烧结或中温反应烧结处理，热喷涂层具有很高的结合强度。

The experimental results showed that with the increase of kenaf powder mesh size, the internal bond strength and thickness swelling properties of kenaf core binderless particleboard have been greatly improved.

可以得出结论，随着红麻粉末目数的增加，红麻秆无胶碎料板的内结合强度以及吸水厚度膨胀率性能都有了很大的改善。

Phenolic resin has excellent bond strength, water resistance, durability, acid-resistant and drug-resistant features, excellent performance, which is an excellent adhesive.

酚醛树脂具有优异的胶结强度、耐水性、耐久性、耐酸和耐药性的特点，是一类性能优良的胶粘剂。

Effect of Processing on the Bond Strength between Porcelain Enamel and Ni-Cr Alloy

工艺因素对瓷釉与镍铬合金结合强度的影响

Effects of different porcelain bonding systems combined with ceramic surface treatments on the shear bond strength between porcelain and bovine enamel

不同瓷粘结系统及表面处理方式对瓷与釉质间粘结强度的影响

This study shows that the bond strength of deformed GFRP rebars improves obviously, the optimal spacing of ribs should be less than 2.5 times of the rebar dia-meter and height of ribs should be more than 3% of the diameter.

试验结果表明，GFRP变形筋的粘结强度较高，最佳肋间距不应超过直径的2.5倍，肋高度应不小于直径的3%。