bonding strength的例句大全

The relationship of normal bonding strength and Tension-shear bonding strength were understudied by analyzing their data.

通过对正拉粘结强度和拉剪粘结强度数据的分析，了解正拉粘结强度、拉剪粘结强度与混凝土抗压强度的相互关系，以及正拉粘结强度与拉剪粘结强度的相互关系。

gypsum based outer wall plastering material ( svf in short) is a new energy saving outer wall plastering material. it has good construction property, quick hardening speed, high bonding strength and little dry shrinkage.

石膏基外墙粉刷材料（简称SVF）是一种新型节能外墙粉刷材料，具有施工性能好、粘结强度高、硬化快、干缩小等特点。

It was revealed by push out test that the hydroxyapatite coating greatly prompt the bonding strength between implant and surrounding hard tissues.

生物力学实验结果表明，使用羟基磷灰石涂层，可以显著提高骨组织与种植体的界面结合强度。

Study on Complex Interface Bonding Strength in Al/ Cu Bimetal Tude Drawing

铝铜双金属管拉伸复合界面强度的研究

Measurement of Bonding Strength of Magnetic Sputtered TiN Coatings by Indentation Method

磁控溅射TiN界面结合强度的压痕法测试

Design and fabrication of simple hydraulic testing machine for bonding strength

简易手动液压胶接强度试验机的设计制作

The bonding strength of Ti/ porcelain was evaluated using three-point bending test according to ISO 9693 1990 standard.

根据ISO9693标准，对钛/瓷间的三点弯曲结合强度进行测试，并对钛/瓷结合界面进行SEM观察。

At the stoving temperature the reactions among the functional groups carboxy and hydroxy of binder makes line-type polymers into network polymers leading bonding strength.

在烘干8温度（220～250℃）下，粘结剂分子内羧基和羟基官能团之间继续发生反应，使线型聚合物变成网状体型聚合物，从而获得粘结强度。

During the welding process of titanium alloy and aluminum alloy, it is easy to form many kinds of brittle intermetallic compounds at the interface of Ti/ Al dissimilar alloys. Those compounds weak the bonding strength of Ti/ Al joints.

钛合金和铝合金的焊接过程中，在Ti合金/Al合金界面处极易生成各种脆性的金属间化合物，制约着接头的结合性能。

Structure and Property and Bonding Strength of Titanium Carbonitride Coating

氮碳化钛涂层的结构性能及结合强度

the influence of bonding strength of denture soft reline resin by different surface treatments

不同表面处理对义齿软衬树脂黏结强度的影响

effect of the filler metals on the bonding strength of abrasive disc

钎料对单层钎焊砂盘磨粒结合性能的影响

the bonding strength and wood failure was up to the jas standards and was similar to that of untreated wood.

复合木材的胶合强度和木破率与未处理材差异不大，都达到了JAS标准。

factors influencing bonding strength of api adhesive bonded mongolian oak

影响API粘接柞木的强度因子研究

according to microanalyses, the bonding strength is related to interface reaction.

微观分析表明：接头强度的变化主要与界面反应有关。

The thermocompression wire bonding strength was tested with bonding tester. The strength was over 0.17 N.

使用接合强度测试仪对压焊键合点强度进行了拉断试验，测得键合强度拉断力都在0.17N之上。

liquidambar formosana, schima superb mature wood of peeled veneer bonding strength than the national standards for technical requirements.

枫香、木荷的成熟材的旋切单板胶合强度超过国家标准规定的技术要求。

Thermal Stability and Bonding Strength of Hydroxyapatite/ zirconia Composite Coatings

羟基磷灰石/氧化锆复合涂层热稳定性和结合强度的研究

influence of dry or wet dentin bonding surface on wet bonding strength: a microtensile study

干燥或润湿表面对牙本质湿粘结强度影响的微拉伸强度研究

Effect of thermal spray process on bonding strength of aluminum coating on glass surface

热喷涂工艺对玻璃表面铝涂层结合强度的影响