brazing的例句大全

Thermomechanical Treatment for the Automobile Steering Knuckle BRAZING OF HEAT EXCHANGERS IN AIR-CONDITIONER

汽车转向节形变热处理

The whole process of small diameter single-wall brazing tube is described, including stee strip making, forming, brazing, straightening, detection of defects and the treatment of special tube.

论述了Φ12mm以下小口径单层钎焊管的全部生产工艺过程，包括坯料制备、成形、钎焊、矫直、探伤及特殊用途管的处理等。

Copper steel Thrust Chamber Body Diffusion Brazing

铜&钢推力室身部扩散钎焊工艺研究

As indicated by the results of SEM and fractographs at the interface, insufficient brazing time lead to a decrease of joining strength of the alumina ceramic with the reaction layer.

结合SEM及试样断口形貌，初步探讨分析了钎焊时间对接头强度的影响.钎焊时间不足，会造成Al2O3陶瓷与反应层的化学及机械结合力下降；

A new brazing technique of ceramic is presented, in which the arc-added glow discharge titanizing is applied to ceramic as a preparative process, then the ceramic is brazed to metal in glow discharge furnace without flux.

介绍了一种陶瓷钎焊的新方法，即以陶瓷加弧辉光渗钛为先导工序，然后在辉光炉中实现陶瓷／金属无钎剂钎焊。

Effect of heating rate and holding time on microstructure of brazing joint is analyzed.

观察并分析了升温速率及保温时间对接头显微组织的影响。

Behavior of Al/ Cu/ Al Contact Reaction Liquid and Its Brazing

Al/Cu/Al接触反应液相行为及其连接

The bonding between steel and diamond was performed by induction brazing under controlled temperature and time. The filled intermediate layer materials are reactive metal Cr powder and Ag-Cu alloy foil.

利用高频感应钎焊的方法，以Ag-Cu合金和Cr粉为钎料，在一定的钎焊工艺条件下进行了实验研究，实现了金刚石与钢基体间的牢固化学冶金结合。

The bonding between chemical vapor deposition ( CVD) thick films diamond and cemented carbide was performed by diffusion brazing under controlled temperature, pressure and time. The filled intermediate layer materials are reactive metal Ti foil and Ag-Cu alloy foil.

采用扩散焊与钎焊相结合的方法，用Ti箔和Ag－Cu箔共同做中间层材料，在一定的温度、压力和保温时间下，实现了气相沉积金刚石厚膜与硬质合金间的牢固连接。

Scanning Electron Beam Brazing of the Structure of Four Capillary Tubes to a Plate

叠板弹簧的可靠性设计四毛细管-板结构件扫描电子束钎焊

Furnace Brazing of Silver Bearing Watts to Alloy Cr-Zr-Cu at Conductive Loop in Automatic Projection Welding Machine

自动凸焊机导电回路中银瓦与铬-锆-铜合金的炉中钎焊

Wrot copper performs well in high temperature applications and is easily joined by soldering or brazing. Wrot coper is exclusively used for fittings.

在高温环境下，铜也表现很好，而且易于通过焊接或钎焊进行连接。铜专门用作配件材料。

When joint is filled, a continuous rim of brazing alloy will be visible.

连接处被布满后，就会看到焊接合金的边沿。

Brazing for assembling cathode and photoetching grid of electron tube using high frequency pulse plasma flame

电子管阴极和光刻栅极的高频脉冲等离子弧钎焊

Brazing quality and product reliability are both increased as using high frequency pulse microplasma arc heating process for assembly brazing of cathode and photoetching grid of electron tube.

采用高频脉冲微束等离子弧做为电子管阴极和光刻栅极装配钎焊工艺的热源，提高了钎缝质量和产品的可靠性。

Effects of Brazing Temperature on Vacuum Joint Microstructure and Microhardness of Inconel Superalloy

钎焊温度对镍基合金真空钎焊接头组织及硬度的影响

Brazability of Mg alloys containing Al by light beam brazing

含镁铝合金光束钎焊性能的研究

Application of Composite Brazing Aluminium Foil Technology in Automotive Heat Exchanger Production

复合钎焊铝箔技术在汽车热交换器生产中的应用

Summary on reason of aluminum alloy panel radiator by vacuum brazing leak out

铝合金板式换热器真空钎焊泄漏原因分析

Milling, planing, impact and percussion. High toughness for medium wear resistance. Well suitable for brazing.

铣削、刨平、挤压和冲击操作。在中等磨损条件下具有高的韧性。很适合硬焊。