breaking strength的例句大全

Test of Normality and Measurement Value Choice for Jute/ Kenaf Bundle Fibers Breaking Strength

黄、红麻束纤维断裂强力测定值正态性检验与取舍

Testing method for breaking strength and elongation of cotton fibers: flat bundle method

棉纤维断裂强力和扯断伸长率的试验方法：平束法

At the same time, its disadvantage is that it needs high requirements for thinness of yarns, breaking strength and tensile elongation at break.

不足之处是，对纱线细度、断裂强力、拉伸断裂伸长率有较高要求。

The decreasing of crosslink density made the glass transition temperature increase, and the tensile breaking strength and tensile elongation at break decrease.

聚合物交联密度下降使材料玻璃化转变温度提高，拉伸断裂强度和拉伸断裂伸长率下降。

because by grouping the fibers you greatly increase their breaking strength-

因为通过这样揉搓，极大地加强了这些纤维的抗断强度——

Thermal and photo aging mechanism of PVB film was studied by the use of IR spectra and the change of tensile breaking strength.

利用红外光谱和力学性能的变化研究了聚乙烯醇缩丁醛薄膜的热老化和紫外光老化机理。

In addition, single leaf weight, leaf density and thickness of tobacco leaves cured in bulk curing barn were bigger, whereas, percentage stem, balanced moisture content and tensile breaking strength were smaller.

另外，密集烤房烤后烟叶单叶重、叶质重与厚度较大，而含梗率、平衡含水率与拉力较小。

With the alkali treatment time and alkali concentration increasing, the tensile breaking strength of the yarn increased first and then decreased. After the silane coupling agent treatment, the tensile breaking strength of the yarn was improved.

随碱处理时间的增加以及碱浓度的提高，黄麻纱线的力学性能先增大后减小；经偶联剂处理以后，黄麻纱线的断裂强度有所提高。

The tensile strength and tangential breaking strength of gelatin film could be enhanced by glycerin plasticizing at the concentration of 0.2%, but the heatsealing strength tended to decrease.

用0.2%甘油增塑的明胶膜，其抗拉强度，直角撕裂强度均有所改善，但其热封强度稍有下降；

The results indicated that glycerin plasticizing at the concentration of 0. 2% could enhanced the tensile strength, tangential breaking strength, breaking elongation rate and heatsealing strength of compound methyl-cellulose films.

结果表明：用0.2%甘油增塑的甲基纤维素复合膜，其抗拉强度、直角撕裂强度、断裂伸长率和热封强度均有所改善；

Testing method of wet tensile breaking strength of paper and paperboard

纸和纸板湿抗扯裂强度的标准试验方法

Fracture analysis and breaking strength of the main axle of chipper

削片机主轴断口分析与断裂强度

The breaking strength of PP BCF increased to 1 70 ￣ 1 90 cN/ dtex by appropriately adjusting the amount of chemical degradation masterbatch, increasing spin manifold temperature and optimizing cooling conditions and drawing process.

生产中适当调整降温母粒添加比例，提高纺丝箱体温度，优化冷却条件和拉伸工艺，生产出的丙纶BCF断裂强度可达1.70～1.90cN／dtex。

A Study on Consistency of Cotton Fibre Specific Breaking Strength by Different Tensile Testers

强力仪测定棉纤维断裂比强度的一致性研究

Because of quantity increased in water body of which having out-of-phase, which leading to volume breaking strength decreased, thus cavitation damage occurred easily.

由于水体中异相介质数量的增多会使体积破坏强度降低，空化容易发生。

Experimental Analysis of Factors Affecting Single Yarn Breaking Strength CV

成纱单强CV值影响因素的试验分析

Furthermore, the dual system can also improve the breaking strength of the paper product.

且能提高成纸的强度。

Comparative analysis of dynamic and static breaking strength of yarns

纱线动态与静态断裂强力的比较分析

Testing difference analysis of the fabric breaking strength

织物断裂强力的测试差异分析

Test method for breaking strength of yarn and thread; skein method

纱线的断裂强力试验法：绞纱法