buckling的例句大全

The mechanism of tearing and buckling failure in the process is studied, the criteria of failure are established;

系统地研究了管轴压成形过程失稳开裂和起皱的机理，采用能量原理建立了起皱和开裂的判断准则；

Applying the reliability design theory the initial reliability for critical buckling strength of steel thin-wall cylinder was analyzed in case of maintaining outer pressure test; the scope of initial reliability was discussed under different operating conditions.

应用可靠性设计理论，分析了在保持外压差试验时钢制薄壁圆筒临界失稳强度的初始可靠度，讨论了不同工况下初始可靠度的范围。

Yoshida Buckling Test and Buckling-Resistance of Sheet Metals

YBT试验与板材抗皱性

Eigenvalue buckling analysis can only forecast the theoretical buckling strength of an ideal linear elastic structure, because of the unideal property of material and geometrical nonlinearity, most structures can not reach their theoretical strength limit.

特征值屈曲分析只可预测一个理想线弹性结构的理论屈曲强度，材料非理想性与几何非线性使得大多数结构无法达到它们理论强度极值。

Analysis the development of test equipment of testing buckling column's critical load based on the definition of the compressive column's stability

基于压杆失稳定义的稳定试验装置研制过程

The dynamic buckling of shells, when subjected to a torsional impact at one end, is studied in the present paper on the theory of stress wave propagation and finite element methods.

借助于波动理论和有限元分析方法研究了圆柱壳扭转屈曲的产生机理和发生发展趋势。

The tectonic level had evolved from early plutonic to late hypabyssal and deformation mechanism evolved from flow, flattening, buckling, ductile shear to shear rupture.

构造层次由早期深部层次向晚期浅层演化；其变形由流动机制压扁机制弯曲机制韧性剪切机制到剪切破裂机制的演化。

It manly analyzes four kinds transmutations of piston effect 、 temperature effect 、 expansion effect 、 helical buckling effect in the system of tubing and packer.

针对油管柱&封隔器系统的活塞、螺弯、温度、鼓胀等四种基本效应进行分析，同时根据现场工艺特点进行了温度场和压力场的研究。

According to nonlinear finite element analysis, the ultimate load-carrying capacity of tensegrity system is discussed based on the buckling of struts.

本文根据非线性有限元理论研究讨论基于压杆失稳的张拉整体结构极限承载能力。

This thesis illustrates the difference and the relation between tension field theory and bifurcation buckling theory according to the development of wrinkling.

本文从褶皱理论的发展过程入手，分析了张力场理论和分叉屈曲理论的区别和联系。

A full shear resisting process of a steel plate, which developed from elastic buckling to post-buckling initial yielding at the end of the strip, and then to the yielding of tension field formed in the whole plate, was simulated reasonably by use of the strip model.

利用板条模型合理地模拟了钢板由弹性屈曲到屈曲后板条端部初始屈服，再到钢板大面积充分形成拉力带屈服的全过程。

There are two failure modes of the thin film, one is the bifurcation and fracture under the tension load, and another is buckling and delamination under the compression.

薄膜的破坏形式有两种，一种是在拉伸状态下的分叉和断裂，另一种是在压缩载荷情况下的屈曲和脱粘。

Protesters accused Wilson of buckling under to right-wing religious groups

抗议者指责威尔逊屈服于右翼宗教团体。

Buckling analysis of rotation-restraint rectangle plate on elastic support

边界转动约束面内弹性支承矩形板屈曲分析

The dynamic buckling behavior of the thin-wall cylindrical shell is more complicated than that of the thick shell due to its more unevenness.

由于薄壁圆柱壳比厚壁圆柱壳的不均匀性更大，薄壁圆柱壳的轴向动力屈曲比厚壁复杂得多。

Theoretical analysis shows that Width to Thickness ratio and buckling coefficient are the main influence of the local buckling of the web, and the relative thickness and the relative Width to Thickness ratio influence the buckling coefficient most.

通过对其腹板局部屈曲的理论分析，认识到影响其腹板局部屈曲的主要因素为腹板宽厚比和屈曲系数，影响屈曲系数的主要因素为腹板与翼缘的相对厚度和它们的相对宽厚比。

The theoretical and experimental research on critical pressure in buckling of short thin cylinder under external pressure

外压薄壁短圆筒临界失稳压力理论及试验研究

Wrinkle behavior of automobile thin sheet metals by modified Yoshida buckling test

汽车薄钢板不均匀拉伸皱曲行为研究

Because of the development of construction of high arch dams in China and thinner dam body with the use of optimum design, local regions of arch dams approach thin shell structure, which will lead to structural buckling.

由于我国高拱坝建设的兴起，以及拱坝体形优化设计使坝体的厚度更薄，拱坝部分区域已接近薄壳结构，可能导致坝体结构失稳的发生。

Bending, Buckling and Vibration of Reinforced Concrete Slabs Bonded with Thin Steel Plate

粘钢补强板的弯曲、屈曲与振动