coatings的例句大全

The wear mass loss of the Mo2Ni3Si/ NiSi silicide composite coatings increases very slowly with increasing wear test load under room-temperature sliding wear test conditions.

在常温滑动磨损条件下，Mo2Ni3Si/NiSi金属硅化物复合材料涂层的质量损失随着载荷的增加缓慢增加；

Obtained nanocomposite electrodeposition coatings rate is one times than electroless plating, look at micromorphology that the surface of nano-composite coating grow well, dense, uniform thickness, through the bending test and thermal shock test proved nano-magnesium alloy matrix composite coating have a good combination.

得到的电沉积纳米复合镀层的镀速比化学镀的镀速提高一倍，并且纳米复合镀层表面平整、致密、厚度均匀，通过弯曲、热震试验证明镁合金纳米复合镀层与基体结合良好。

Wide spectral reflection coatings for intermediate infrared DF laser optical systems

中红外DF激光系统宽光谱反射膜的设计与实验测量

Finishing Technology and Process of Modified Polypropylene Plastic Coatings for Bumpers of Minibus

微型汽车改性聚丙烯塑料保险杠的涂装技术及涂装工艺

Analysis of interfacial stress on coatings based upon hertz contact theory

基于Hertz接触理论的涂层界面应力分析

Study on Thermal Absorption of Thin Film Coatings Irradiated by Infrared CW Laser

红外连续波激光辐照下光学薄膜元件的热吸收特性研究

Study on Fabrication of Metallic Ceramic Coatings by Thermochemical Reaction Method

用热化学反应法制备金属陶瓷涂层工艺的研究

Current status and development of metallic ceramic coatings prepared by thermochemical reaction method

热化学反应法制备金属基陶瓷涂层的现状和发展

Alumina matrix ceramic coatings prepared by thermochemical reaction method and study on its corrosion resistance

Al2O3基热化学反应法陶瓷涂层制备及耐蚀性能

The developments and current status of the ceramic coatings prepared by thermochemical reaction method were overviewed.

综述了热化学反应法制备陶瓷涂层的发展及现状。

The fabricating process of metallic ceramic coatings by thermochemical reaction method was studied. The phase structure and microstructure of the coatings were also investigated in this paper.

研究用热化学反应法在金属表面制备陶瓷涂层的工艺，并对涂层的相结构及显微组织进行分析。

The characteristics of the ceramic coatings prepared by thermochemical reaction method were discussed from two aspects of process and interface, and the study progress of the coating's mechanism was also introduced.

从工艺与界面2个方面叙述了热化学反应法制备陶瓷涂层的特征，以及其机理的研究进展。

In the researches of rare earth surface engineering, the rare earth elements can be added into the coatings or layers of surface modification in many ways, including thermochemical treatment, thermal spraying and surfacing and laser surface treating etc.

稀土表面工程研究中可通过多种方法将稀土元素加入表面改性层，通常采用化学热处理、热喷涂和喷焊、激光表面处理等方法。

The thermoplastic acrylic resin with a certain glass transition temperature was prepared by choosing reasonable ratio of monomers. As the coatings binder for ABS plastics, It has good physical property and alcohol resistance.

通过选择合理的原料单体配比制备具一定玻璃化温度的热塑性丙烯酸树脂，作为ABS塑料用涂料的基料，具有较好的物理性能以及优良的耐醇性。

Thermoplastic polyethylene powder coating is characterized by its non-toxicity, smellless, chemical resistance, excellent low temperature resistance and low cost, and particularly suitable for coatings of home hardwares, food containers and surfaces having special requirement.

热塑性聚乙烯粉末涂料无毒无味，耐化学腐蚀，低温性能好，且价格又比其他粉末涂料低得多，特别适用于日用品、食品容器和特殊要求的表面涂装。

A thermosetting resin; used chiefly in strong adhesives and coatings and laminates.

一种热硬化性树脂，主要用于强力粘合剂和涂料、绝缘层中。

In this paper the method of measuring blackness by IR thermovision is introduced, The measurement principles are analysed and the measurement results of a aluminium radiator with three kinds of coatings are given.

本文介绍了利用红外热象仪测量散热器的黑度的方法，分析了测量原理，介绍了三种不同表面涂层的铝型材散热器的黑度的测量结果。

The use of BYK-410 Liquid thixotropic agent in coatings

液体触变剂BYK-410在涂料中的应用

And that 60 μ m dry film thickness in one coat is no sagging when the dosage of thixotropic agent BYK-410 is 0.3% and the application performance of coatings is good when the dosage of drying retarder DBE is 2%.

当触变剂BYK-410的用量为0.3%时，清漆一次涂装干膜60μm不流挂，当DBE慢干剂用量为2%时，涂料具有好的施工性能。

Study on thermal fatigue of ( ti, al) n, tin coatings

（Ti、AI）N、TiN镀层的冷热疲劳性能研究