constant current的例句大全

Its application in the high energy ignition controll system realizes the most important three functions namely, constant current, dwell angle controlling and protection during supply interruption and circuit breaking off.

它在高能点火控制器中的应用，实现了专用点火芯片中最重要的3种功能，即恒流、闭合角控制及停电断电保护。

The welding power source made of three-phase half-control bridge thyristor rectifier provided four kind of static output characteristics which were constant current, constant voltage, quick and slowly current descending.

焊接电源采用三相半控桥晶闸管整流电路，用不同方法计算偏差进行多变量数字解耦PI调节获得恒流、恒压、陡降和缓降四种输出静特性。

The development of high accuracy constant voltage and constant current programmable power supply

高精度稳压恒流可编程电源的研制

Automatic voltage regulator for constant current charging three-phase full wave constant voltage rectifier

恒流充电用自动调压器三相全波恒压整流器

Mainly through the voltage regulator chip, integrated operational amplifier, a programmable constant current source which is voltage-current mode is designed. When the current of constant current source flows through the gas sensor, the resistance signal of the sensor can turn into standard-voltage acquisition signal.

主要是通过稳压芯片，集成运放设计一个电压转电流型程控恒流源，恒流源的电流流经气体传感器，把传感器的电阻信号转换成标准的电压采集信号。

Constant current power supply includes the thyristor rectifier circuit, monitor and control circuits based on MSP430 microprocessor.

恒流电源方面，设计了晶闸管整流电路、以MSP430单片机为核心的测控电路。

A constant current source& thyratron constant current used for THF method of pressure resistance in laboratory

一种安装在仪器室内的压阻法恒流源线路&闸流管恒流源线路

The constant current source of thyristor commutation supply voltage

晶闸管整流供电的恒流源

The control system of street light unit uses the constant current to supply, has the function of establish and timing adjustment output.

路灯单元控制系统采用恒流源供电，具有输出功率调整功能，并能定时调整功率。

The approach is designed a group of temperature controlled switch circuit which control whether the parallel resistance is activated or not. Temperature signal is come from bridge voltage signal which is power supply by constant current source.

技术途径是设计一组温控开关电路来控制并联电阻器是否接入，温度信号来源于恒流源供电下的传感器桥压信号。

The anatase and rutile TiO_2 porous films were prepared directly on the surface of pure titanium by constant voltage and constant current anodic oxidation using sulphuric acid, pure titanium and pure copper as electrolyte, anode and cathode, respectively.

以硫酸为电解液，纯钛（TA1）为阳极，铜片为阴极，以恒压和恒流阳极氧化方式在钛表面直接获得锐钛型和金红石型TiO2多孔膜。

Principle and characteristic of constant voltage charge, constant current charge, pulse quick charge were analyzed;

分析了铅酸蓄电池定电压充电、定电流充电及脉冲快速充电的原理及特点；

Constant Current/ Constant Voltage and Double Closed-loop Control System Made of TL 494

用TL494构成的恒流恒压双闭环系统

Research on alternating constant current drive systems for high-power load;

介绍一种全数字控制的高性能交流主轴伺服驱动系统。

In order to improve the performance of thermal conductivity detector ( TCD) for gas chromatography, a precision constant current source circuit and a difference voltage detection circuit were designed.

为了提高气相色谱仪用热导检测器的性能，设计了热导检测器的精密恒流源和差压检测电路。

Design of PWM Constant Current Division Drive Circuit of Stepper Motor

PWM细分恒流步进电机驱动电路的设计

Taking A/ Dvantage of thermal resistance through the constant current source putting the temperature into voltage, and then by 24-bit high-precision A/ D converter a convenient digital signal imported into DSP.

硬件的实现是利用热敏电阻通过恒流源激发将温度值转化为电压值，经24位的高精度A/D转换器，转化为便于处理的数字信号提供给DSP。

Then the control system for boring the non-cylinder pin hole of piston was developed, whose main function modules including displacement ( detection,) temperature detection for thermal deformation compensation, constant current power and ( central) control unit.

然后研制了活塞异形销孔加工控制系统，包括主控、位移检测、热变形补偿温度检测和恒流源驱动等功能模块。

In plane cathode micro-hollow anode sustained discharge, the peak value of EEDF will move toward right when the third electrode voltage increases with constant current and gas pressure, but it will reach a saturated value.

在平板阴极微空阳极放电维持的辉光放电中，当电流与气压恒定时，随着第三电极电压的升高，电子能量分布的峰值右移，放电趋向高能化，但都会达到一个饱和值。

The AMA with constant voltage source exhibits damping character, while with constant current source it provides only a negative stiffness that lowers the critical speed of the rotor system.

当提供的电源为恒流源时，控制执行器仅提供负刚度，从而使整个支承刚度降低，转子临界转速下降，此时宜采用变刚度控制。