corrosion test的例句大全

Corrosion resistance of zinc impregnation and dacromet coating was studied by environmental corrosion test and electrochemical measurement techniques.

通过实际环境腐蚀试验和电化学测试，研究了粉末渗锌涂层和达克罗涂层在不同水环境中的耐蚀性能。

The experiments shows that the SO2 corrosion test based on JIS standard has the best maneuverability, but needs a long test period.

实验表明，JIS标准的SO2腐蚀实验可操作性最好，但是测试周期较长，硝酸蒸汽法可在较短时间内得到较好的腐蚀效果。

In chapter 4, according to the related standards and the particularity of the caustic medium, the paper puts forward a creationary laboratory metal corrosion test.

在第4章，参照相关标准，并根据腐蚀介质的特殊性，创造性的设计了试验室金属腐蚀试验。

Through permeability resistance test, sulfate corrosion test and abrasion resistance test, the relationship of construction techniques, concrete surface quality and durability was reached.

通过混凝土抗渗性试验、抗硫酸盐腐蚀试验和耐磨性试验，得出施工工艺和混凝土表面质量与混凝土耐久性的关系。

The H 2S corrosion behavior of over bending and under bending formed spiral submerged arc welded steel pipes in NACE solution has been investigated by use of the self designed full scale pipe corrosion test unit.

采用自行设计的焊管实物管段腐蚀试验方法和装置研究了内胀成形和外控成形两种X60螺旋缝埋弧焊管在含H2S的NACE溶液中的腐蚀行为。

Exfoliation corrosion test for aluminium alloy

铝合金层状腐蚀试验

Experimental techniques such as tensile test, metallographic examination, classical corrosion test and polarization curve measurement were used to study the mechanical properties, microstructure and corrosion resistance of tin brass for condensation tube in power plants.

采用拉伸试验、金相显微分析、经典腐蚀试验方法及阳极极化曲线的测定，研究了电厂用锡黄铜冷凝管的力学性能、组织和耐蚀性能。

Thermal shock test, microscopy, micro-hardness, wear resistance and corrosion test were used to study the relation of microstructure and properties of brush plated NiW ( D) layer with brush-plating voltage.

通过金相观察，显微硬度，磨损试验，腐蚀试验及热震试验，研究了NiW（D）合金电刷镀层的组织、性能与工作电压的关系。

Research progress on accelerated corrosion test method which can evaluate the corrosion protecveness of the post tensioning grouts is reviewed.

综述了近期国内外在后张预应力结构灌浆材料加速腐蚀实验方面的研究进展。

The Relativity of the simulated Accelerated Test of Carbon Steel and Low Alloy Steel and Atmospheric Corrosion Test

碳钢和低合金钢模拟加速试验与大气腐蚀试验的相关性

Its use will have more important significance for national atmospheric corrosion test station to do management in a scientific way.

它的应用对实现全国大气腐蚀试验站的管理科学化具有重要意义。

An overall technical examination is presented including metallographic examination and corrosion test between crystals.

并对换热器进行金相检查、晶间腐蚀试验等项目全面技术检验。

Research of accelerated corrosion test method of zinc, cadmium plating on high-strength steel

高强度钢锌、镉镀层加速腐蚀试验方法研究

stainless steels& method of ferric chloride crevice corrosion test

GB/T10127-1988不锈钢三氯化铁缝隙腐蚀试验方法

Taking the Jinan-Zibo area of Shandong Province as an example: four corrosional mechanisms of carbonate fault rocks are proposed based on the theoretical analysis, corrosion test, observation under optic and electronic microscope and field work.

本文以中国山东省济南&淄博地区为例，根据理论分析、溶蚀实验、光学及电子显微镜的观察和野外工作，提出了碳酸盐岩断层岩的四种溶蚀机理。

Environmental test methods have high and low temperature test, impact test, temperature resistant and corrosion test, test, test, and dustproof sealing test, vibration test, impulse hammer and crash test, transport test, constant acceleration test, life test ( durability).

环境试验方法有高低温试验、温度冲击试验、耐潮及防腐试验、防霉试验、防尘试验、密封试验、振动试验、冲击和碰撞试验、运输试验、恒加速试验、寿命（耐久性）试验等。

Spot evaluation test, which was carried out by the method of corrosion test ring, results show: composite inhibitor is consistent to saturated saltwater drilling fluids, its inhibition efficiency is about 90%.

运用腐蚀试验环法进行现场评价试验，结果表明：该复合缓蚀剂和饱和盐水钻井液配伍性良好，现场缓蚀率达到90%左右，效果明显。

The stress corrosion cracking ( SCC) of carbon steels in aqueous alkali was studied by electrochemical technique, stress corrosion test under constant load and repassivation test.

本工作通过电化学，恒载荷应力腐蚀和再钝化试验，对碳钢在碱溶液中的应力腐蚀破裂进行了研究。

Corrosion potential of tin-zinc alloy deposits with different zinc content was compared to that of zinc and cadmium deposits. Corrosion resistance of tin-zinc and zinc deposits were examined by neutral salt spray test and accelerated corrosion test in sulphur dioxide atmosphere.

本文比较了不同含锌量的锡锌合金镀层、锌镀层和镉镀层在5%氯化钠溶液中的电位、中性盐雾试验以及二氧化硫加速腐蚀试验结果。

In addition, based on detailed analyses of test results and careful observation of corrosion tests, this thesis discussed the protective mechanism of coatings resistant to SSCC and the failure mechanism of some kinds of coatings in wet H2S environment.

同时本文在对试验结果详细分析及对腐蚀试验过程仔细观察的基础上，论述了涂层防止湿硫化氢应力腐蚀的防护机理，以及几种涂层的失效机理。