curing agent的例句大全

Preparation of Modified Imidazole Latent Curing Agent for Epoxy Resin

改性咪唑类潜伏性环氧树脂固化剂的制备

Influencing of curing time on film hardness is discussed through modifying the ratio of paint and curing agent. The defects from spraying process and the countermeasures are narrated.

通过调整漆与固化剂比例，讨论了固化时间对漆膜硬度的影响，同时论述了喷涂过程中产生的缺陷和采取的措施。

Studies on the Phase Separation of Poly ( ether imide) Modified Tetrafunctional Epoxy Resin The Effect of Curing Agent Ratio

热塑性聚醚酰亚胺改性四官能度环氧树脂的相分离研究&固化剂用量的影响

A new type anti-corrosive epoxy coating was prepared with nano iron oxide/ titanium dioxide compound pigment, epoxy resin and curing agent.

采用在环氧树脂中加入纳米复合铁钛粉防锈颜料WD-D-325、固化剂、制备了新型环氧树脂防腐涂料。

Preparation of Water-Borne Epoxy Resin Coating Based on Curing Agent Dispersible in Aqueous

水分散型水性环氧涂料的制备

A kind of external thermal protection coating material which takes epoxy-modified organic silicone resin and polyamide curing agent as matrix, and thermal-insulating and heat-resisting fillers as additives was developed.

研制了一种由环氧改性有机硅树脂、聚酰胺类固化剂为基体，以隔热及耐热填料为添加剂的室温固化耐高温外热防护涂料体系；

Use TG to investigate heat-resistant quality of MUF resin, and the effect of curing agent, storage time, sample state on that was mainly studied.

采用热重分析法（TG）对MUF共缩聚树脂的耐热性能进行评价，重点比较了固化剂、贮存时间、样品状态等条件对MUF树脂耐热性能的影响。

A intermediate temperature curing thermosetting oil-surface adhesive was prepared by using the product as curing agent for epoxy.

以此作为环氧树脂的固化剂，配制成中温固化的热固型油面胶。

Selection of resin and curing agent for PU powder coatings

聚氨酯粉末涂料树脂及固化剂的选择

a composite conductive paint based on copper powder and epoxy resin was developed, and the effects of curing agent, copper powder and binding agent on the conductivity of paint were discussed.

研制了一种以环氧树脂为基料的铜系导电涂料，讨论了固化剂用量、铜粉含量、钛酸酯偶联剂JSC的用量以及处理方法对涂料导电性能的影响，并分析了原因。

two-component waterborne polyurethane paint consists of a polyisocyanate as a curing agent and a dispersion polyol of aqueous crosslinked polyurethane, which was synthesized by using tmp as an extender.

采用三羟甲基丙烷（TMP）为扩链剂合成具有交联结构的水性聚氨酯分散体多元醇，与多异氰酸酯固化剂组成双组分水性聚氨酯涂料。

the influence of tmpta co curing agent on the curing behavior, the physical properties and the aging properties of the peroxide cured epdm was investigated.

采用三羟甲基丙烷三丙烯酸酯（TMPTA）作共交联剂，研究其对EPDM的过氧化物硫化行为、力学性能及老化性能的影响。

A kind of curing agent is prepared and thereof consists of the part of the adhesives which have showed good performance in the ageing test process.

采用自制的固化剂所配制的建筑结构胶耐湿热老化性能优良，完全满足国家标准的要求。

Preparation and modification of water-dispersible epoxy curing agent

水性环氧固化剂分散体的制备及改性

The proportion of CPE/ CHR, the selection of solvents, curing agent, and tackifying resins, and the determination of their addition were discussed.

对CPE／CHR的并用比、溶剂、固化剂、树脂等种类的选择和用量的确定进行了试验。

Application of curing agent DL 268 to NR/ SBR compound

硫化剂DL-268在NR/SBR胶料中的应用

Preparation Research of New Pale Color PU Curing Agent with Low Free TDI

新型浅色低游离TDI聚氨酯固化剂的合成

Effect of curing agent content on RTM epoxy system curing properties

固化剂含量对RTM用环氧树脂体系固化性能的影响

Curing agent in the soil-cement block construction waste application

水泥土固化剂在建筑垃圾砌块中的应用

Study on Epoxy/ Nitrogen-containing Flame Retardant Curing Agent System

环氧树脂/含氮阻燃固化剂体系的研究