ductility的例句大全

Desirable properties for forming include low yield strength and high ductility.

令人满意的成形特性包含了低降伏应力和高延展性.

The structural influencing coefficient includes ductility reduction factor and over strength factor.

结构影响系数主要包括延性折减系数和超强系数.

The high-temperature ductility deteriorates and intra-granular strength increases with an increases of dynamic precipitation of carbide.

结果表明:晶内强度随碳化物动态析出量的增加而上升,高温塑性随之而降低.

Excellent toughness and ductility in all directions.

不论大小尺寸,韧性及延展性高高且各向同性.

Analysis shows that the confined concrete can obviously improved bearing capacity and ductility.

分析表明,约束混凝土可以显著提高其承载力和延性.

The various properties of structural steel, including strength and ductility, are determined by its chemical composition.

构造钢料的各种不同性质, 包括强度和延性, 被它的化学成分决定.

Silicon bronze has the ductility of copper but much more strength.

硅青铜不但具有铜的可锻性,而且还具有很高的强度.

The larger the thermal gradient, the lower the anisothermal ductility.

温度梯度越大, 不等温韧性越低.

The ductility feature will also contribute in the calculation process.

延性特徵也将有助于在计算过程.

Ductility is a measure of the degree of plastic deformation that has been sustained at fracture.

延伸度是指材料在断裂时发生的塑性形变程度的量度.

Ductility allows a metal or alloy to be drawn into a wire.

延展性使金属或合金能被拉成丝.

Tests used to assess the ductility and malleability of stainless steel subjected to bending.

测试不锈钢在弯曲状态下的延展性及可锻性.

The formulas to calculate the ductility and limit comer of column hinge with composite stirrups derived.

导出了复合配箍柱铰的延性和极限转角的计算公式,并提出了抗震柱铰的有关设计建议.

The relation of displacement ductility factor μ?, axial load ratio n, shear-compression ratio v and average bond stress of the reinforcements are quantified on the basis of early research.

并在以往研究的基础上拟合出矩形截面柱中间层中节点梁筋贯穿段平均粘结应力与组合体位移延性系数μΔ、轴压比n和剪压比v的定量关系；

An alloying element used in stainless steels to enhance ductility and corrosion resistance.

不锈钢中的一种元素,提高不锈钢延展性和抗腐蚀能力.

Engineering properties of the asphalt mastic such as penetration, penetration index, softening point, ductility, and viscosity were observed as a function of type and content of mineral filler used.

通过试验，得到了沥青胶浆针入度、针入度指数、软化点、延度及粘度等工程性质对应于不同添加剂种类及含量的函数关系。

The influences of the percentage of hollow core, the ratio between axial forces and compression strength of concrete as well as the arrangement of stirrups and longitudinal reinforcement on the hysteretic characteristics and ductility of hollow core columns are investigated and compared with that of solid columns.

研究了空心率、轴压比以及箍筋形式和纵向钢筋配置方式等因素对滞回特性和延性的影响，并与实心柱进行了对比。

The mechanical property of N80 steel has increased obviously after adding corrosion inhibitor, where the ductility of N80 steel increased, and crack fissure of fracture surface decrease.

添加缓蚀剂后使N80试样的韧性有明显的增加，断口裂纹缝隙明显减小，力学性能有了明显的提高。

Weld access hole geometry and size have significant effect on ductility and failure mode of the connection.

节点局部构造尤其是焊接孔形状尺寸对于节点应力集中情况和节点破坏模式有很大影响。

So, it has great engineering significance to increase the axial press capacity and ductility of RCSSC in the same area of the section.

因此，如何在保持现有截面的大小的情况下，同时提高异形柱的轴向受压承载力和柱的延性具有重要的工程意义。