dyna的例句大全

The soft ware package of DYNAFORM/ LS-DYNA on the basis of none linear explicit calculation method is adopted in the process of press numerical simulation.

本文所有的冲压数值模拟工作均采用了以非线性显式算法为基础的DYNAFORM/LS-DYNA软件包实施完成。

After this, the dynamic response of a lightweight torpedo shell structure subjected to shock waves induced by far-field underwater explosion was simulated by LS-DYNA, and influence of the torpedo insides and shock environment of the torpedo shell structure were studied.

在此基础上模拟了鱼雷壳体结构在远场水下爆炸作用下的动态响应，研究了鱼雷内部构件的惯性效应对于壳体毁伤的影响，分析了鱼雷壳体的冲击环境。

A three-dimensional computational study for the process of shooting heavy cluster warhead by gasbag has been performed using finite element program of LS-DYNA.

利用LS-DYNA有限元软件对用气囊抛撒重型子弹药的过程进行了数值模拟。

LS-DYNA was used to modeling and dynamics simulation, and to introduce its application in nonlinear flexible structure simulation.

通过LS-DYNA对警用网枪发射的柔性网体进行建模和动力学仿真，介绍了其在非线性的柔体仿真中的应用。

A comprehensive understanding of the bridge seismic response analysis was introduced in this paper. Using ANSYS/ LS-DYNA software, this paper based on the cable-stayed bridge in Songyuan.

本文在全面了解桥梁地震反应分析，利用ANSYS/LS-DYNA软件的基础上，以松原斜拉桥为实例，对斜拉桥进行了考虑桩-土-桥动力相互作用的影响的地震反应分析。

The political, economical, cultural essences between the Taiping rebellion and the Qing Dynas-ty were similar, which had not broken through the feudal tradition.

对比太平天国与清王朝，两集团政治、经济、文化本质相似，都没有突破封建的传统；

Make use of the software of ANSYS/ LS-DYNA to imitate the static compressive process of spherical pore Al foam.

利用ANSYS/LS-DYNA软件对球形孔泡沫铝准静态压缩过程进行了数值模拟。

Taken the amplitude modulated Tangshan Seismic wave as the simulated input, nonlinear dynamic analysis program LS-DYNA is chosen to carry out the earthquake-resistant analysis of the immersed tunnel to provide sufficient evidences for the anti-seismic design of the immersed tunnel.

地震波载荷选用调幅后的唐山地震波，应用通用非线性动力分析有限元程序LS-DYNA进行求解，计算结果可为隧道的抗震设计提供有力依据。

the interface problem between ansys and dyna k file was settled by building multi spring damper element type.

论文运用建立多个弹簧阻尼单元类型的方法，解决了ANSYS与关键字文件的接口问题。

the collapse and buckling behaviors of the static model is analyzed and calculated by rotter's method and the finite element analysis program ls-dyna.

然后用Rotter算法和有限元程序LS-DYNA对静态下料仓过渡段的屈服载荷和联接处环形板／T形板的屈曲载荷进行了分析和计算。

the explosion loads are obtained by dyna fem. using fem optimization technology, the anti-explosion ability of reinforced concrete hollow cylinders is analyzed.

使用DYNA软件计算得到的爆炸荷载，采用有限元优化设计技术，分析了空心圆柱体钢筋混凝土结构的抗爆性能，成功地得到了与化爆实验相一致的结果。

This paper introduces explicit arithmetic of explicit dynamical analysis software package LS-DYNA.

介绍了通用显式动力分析软件包LS-DYNA的显示算法.

The test processes are recurred using LS-DYNA finite element code.

利用LS-DYNA有限元程序数值再现试验过程.

The LS-DYNA another characteristic is that defines the surface and the control factors of the surface.

LS -DYNA 的另一特点就是定义接触面和接触面的控制参数.

Sheet metal digital incremental forming process is simulated with finite element software LS _ DYNA.

利用有限元软件LS_DYNA模拟金属板材单点渐进成形过程.

It is proved that contact algorithm of LS-DYNA is reliable.

研究结果表明,装甲材料侵彻试验过程的数值仿真是有效可行的.

The dissertation discussed the LS-DYNA about the key point of modelling, the rationale and model order.

在本文相应的章节中,详细介绍LS-DYNA程序的建模要点和理论基础及本文模型的命令流.

The advanced DYNA-CHROME electroplating technology for automotive shock absorber rod was introduced in detail.

详细介绍了当今世界上最先进的汽车减振器杆硬铬电镀技术(DYNA-CHROME).

The software ANSYS/ LY-DYNA has been employed to analyze transient dynamic response of a thin-walled conical shell subjected to a cosine pulse loading. As a result, Von-mises stress fields of this shell at different time moments are obtained to test its dynamic strength.

运用有限元分析软件ANSYS/LS-DYNA对在余弦脉冲载荷作用下某圆锥薄壳体的瞬态动力响应过程进行分析，得出了不同时刻下壳体等效应力场的分布，考察了该壳体结构的动强度性能。

Through experiments and FEM of ANSYS/ LS_DYNA program, the deforming mode for free electromagnetic forming and modeled forming of sheet metals are analyzed.

通过实验及ANSYS/LS DYNA程序的有限元模拟，对平板件的电磁自由成型及有模成型的变形模式进行了研究。