elastic element的例句大全

the force sensor is able to measure normal force and friction force simultaneously. the cantilever of force sensor is made up of orthogonal elastic sheet steels whose decoupling characteristics are proved under finite element analysis software ansys.

所设计的测力传感器能同时测定正压力和摩擦力，其悬臂由一组相互垂直的平行弹性钢片组成，其解耦特性经有限元软件ANSYS得到证明。

study on application of extended finite element method in linear elastic fracture mechanics

扩展有限元法在线弹性断裂力学中的应用研究

In the analysis of the creep forces with Kalker theory of three-dimensional elastic bodies in rolling contact with non-Hertzian form, finite element method is first employed to determine differences of elastic displacement of wheel/ rail at the contact point.

在利用Kalker三维弹性体非赫兹滚动接触理论进行轮轨蠕滑力分析时，首先利用有限元方法确定了因轮轨的弹性变形而引起轮轨接触点处的弹性位移差。

thereinto, the magnesium alloy which is composed of the magnesium element and other metal elements, has high specific strength, high specific stiffness, high elastic modulus, good heat dissipation and machinability. these features make it one kind of the most practical light metal material.

其中，以镁元素为基加入其它金属元素形成的镁合金，因比强度和比刚度高、散热性和机加工性优良，成为轻金属材料中最实用一种。

applied nonlinear elastic analysis for cable net glazing, a two-node linear element was presented.

针对单层平面索网幕墙结构静力分析的特点，提出了二节点直线杆单元有限元模型。

Secondly, the three nodes contact element obeying the elastic Coulomb friction constitutive model is presented.

并介绍了服从弹性库仑摩擦本构模型的三结点接触单元.

Then, the theory and conception of elastic mechanics and Finite Element Method ( FEM ) have been discussed.

随后, 阐述了弹性力学和有限元法的基本理论和概念,并详细叙述了有限元法的基本分析步骤.

Analysis of the dam's stress and shift using finite element method with different elastic modula

用不同模量有限元分析坝体应力和变形

So according to the supposition of elastic layered system and characteristic of asphalt pavement with semi-rigidity base course, finite element software ANSYS will be employed to develop 3-D model.

本文选用ANSYS，根据层状弹性体系假设，建立半刚性基层沥青路面的3-D有限元模型，分析路面在动载作用下的动态响应。

In order to analyze the effect of spring plank stiffness on the dynamics performances of swing bogie freight car, the spring plank was considered as an elastic beam using finite element method.

以真实的车辆悬挂系统为主体，以减震弹簧为研究对象，设计了一个基于非线性谱分析方法的减震弹簧失效诊断的实验系统。

The torsional stress of element in elastic stage and plastic stage is analyzed, the torsional failure phenomenon of element is theoretically explained, and three quarters factor of yield stress formula in torsinal test of circle shaft of plastic materials is certificated.

对构件在弹性阶段和塑性阶段时的应力进行了分析，对构件扭转破坏现象进行了理论上的解释，并对塑性材料的圆轴扭转实验屈服应力公式的3/4系数给出了证明。

Rational Finite Element Method for Elastic Bending of Reissner Plates

Reissner厚板弹性弯曲的理性有限元法

An inverse problem of identifying the elastic constants of molded pulp material by making use of finite element analysis and DICM

用有限元分析和DICM确定纸浆模塑材料弹性常数的逆问题

Internal forces of elastic structures are calculated by using three-node quadratic boundary element method in which displacement and traction at elastic structures' boundary are more accurately depicted.

采用更精确地反映弹性结构边界上的面力分量和位移分量的三结点二次边界单元法求解弹性结构在边界上的位移和面力。

With the help of variation method, virtual work principle and cubic hermite element, the author puts forward a finite element method to solve the problem of beam vibration on elastic foundation.

本文应用变分形式、虚功原理、Hermite三次元，提出弹性地基梁振动问题的有限元方法。

In this paper, the efficient quadratic isoparametric boundary element and the multi-region technique were adopted to solve the macroscopic elastic modulus of a biphase medium with random order.

本文采用高效率的二次等参边界元及子域法求解了随机双相介质的宏观弹性模量。

Calculation of Internal Forces of Elastic Structures by Using Quadratic Boundary Element Method

用二次边界单元法计算弹性结构的内力

The finite element method was used to calculate elastic wave propagation in the medium.

本文采用有限元素法计算弹性波在介质中的传播.

An accurate method for time-domain elastic wave field modeling is given by introducing high-order finite element.

在弹性演场正演中,我们通过引入高阶有限单元,给出了一种高精度的时域弹性波场正演方法.

The finite-element method has been used extensively for elastic problems.

在有限元方法已被广泛用于各类弹性力学问题.