electrolyte的例句大全

Stability of electrolyte was measured by 10% sodium chloride solution titrimetric analysis.

使用浓度为10%的氯化钠溶液滴定分析了乳液的电解质稳定性。

On the base of review the development of lithium-ion battery and its additive in detail, carbon bisulfide ( CS_2) was chosen as the film-forming electrolyte additive by theory calculation.

论文详细评述了锂离子电池及其添加剂的发展现状，通过理论计算，确定二硫化碳作为SEI膜成膜添加剂。

Development of Deoxidization Technology of Solid Electrolyte

固体电解质脱氧技术的发展

The contact of solid and electrolyte solution makes the solid electriferous and produce electrical double layers, while the relative motion of solid and liquid occur to electrokinetic phenomenon.

固体与电解质溶液相接触，使固体表而带电并形成双电层结构。当固体与溶液相对移动时，就会发生动电现象。

An investigation on oxygen reduction under thin electrolyte layer using Kelvin probe reference electrode

使用Kelvin探头参比电极技术研究液层厚度对氧还原速度的影响

Electrochemical study of metals under thin electrolyte layer with Kelvin probe method

利用Kelvin探针进行金属薄液层下电化学测量

Research progress of molten nitrate salts as thermal battery electrolyte

用低共熔硝酸盐作为热电池电解质的研究进展

Yttria-stabilized-zirconia ( YSZ) is the most commonly used electrolyte material for SOFC due to its high thermal stability, chemistry stability, excellent mechanical function and pure oxygen ionic conduction in very wide oxygen partial pressure.

Y2O3稳定的ZrO2（YSZ）具有优越的热稳定性和化学稳定性、优异的力学性能以及在较宽的氧分压范围内呈现纯氧离子导电特性等优点，是SOFC最常用的电解质材料之一。

Chemical cross-linking gel polymer electrolyte was fabricated by the method of in-situ thermal polymerization.

采用单体热聚合的原位电解质凝胶法制备了化学交联型凝胶聚合物电解质。

Due to the high energy density and organic flammable electrolyte system, lithium-ion batteries may undergo thermal runaway under certain conditions, leading to unsafe events e.g. ignition, explosion when they are abused or misused.

锂离子电池因其高能量密度及采用有机易燃电解液体系，当发生误用或滥用时，在一定条件下引发热失控，会引起不安全事故。

The thermal stability of battery was improved by choosing thermally stable anode and cathode materials, electrolyte and its additives.

选择热稳定性好的正负极材料、电解液及其阻燃剂，可以提高电池的热稳定性；

Content of the SCN-in electrolyte solution, deposition potential and concentration of solution are important factors on quality of films.

电沉积溶液中SCN-的含量、沉积电位、溶液的浓度等都是影响薄膜性能的重要因素。

Bioaccumulation performance of mercury from real electrolyte wastewater by genetically engineered E.

利用构建的基因工程菌生物富集真实电解废水中的汞离子。

QSPR studies on oxide ion conductivity of perovskites electrolyte based on doped LaGaO_3

LaGaO3基钙钛矿型固体电解质氧离子导电能力的QSPR研究

According to the basic physic-chemical principle of electrolyte solution and Pitzer Ion Interaction Approach, the study on the calculation of the equilibrium of salt-water system was carried out by calculating the activity coefficient of electrolyte solution and osmotic coefficient of water.

根据电解质溶液的基本物理化学原理和近代电解质溶液理论的Pitzer离子相互作用模型，通过计算浓电解质溶液的活度系数和水的活度，研究了盐-水体系溶解平衡的计算方法。

At room temperature, galvanostatic electrodeposition was performed from an electrolyte containing Co2+, Ni2+, Cu2+ ions.

在室温条件下，用含有Co2＋、Ni2＋、Cu2＋离子的化合物作电解质，恒流电镀。

A Method of Dynamic Ebulliometer for Measurement of Osmotic Coefficients of Electrolyte Solution

应用沸点计法测量非挥发性电解质溶液的渗透系数

The Production of Nickel Powder with Nickel Sulphate Electrolyte Containing Low Chloride

低氯硫酸镍电解液生产镍粉

The optimized parameters for the electrochemical reaction were recommended as current density 1 mA/ cm~ ( 2), pH value of the electrolyte 13, electrochemical treatment duration 1 h.

制备BaWO4薄膜适宜的电化学反应工艺参数为：电流密度1mA/cm2，电解液的pH值为13，电化学处理时间为1h。

The evaluation of impedance parameters shows electrochemical reaction impedance of metal/ electrolyte interface is primarily determined by water uptake in coatings. The water sorption of coatings directly determines electrochemical reaction area of base metal/ electrolyte interface.

阻抗参数解析表明，金属/溶液界面的电化学反应阻抗主要决定于涂层中的吸水过程，后者直接决定基体/溶液界面的电化学反应面积。