extrusion的例句大全

The research and development of polyolefin pipe extrusion production line are introduced, in which SRH series co-rotating parallel twin-screw extruder is used as the host machine.

介绍同向平行双螺杆挤出机挤出聚烯烃管材生产线的开发与研究。

This can be translated to lower die head pressure or lower mechanical tear and wear or higher extrusion productivity ( up to 21%) without compromising product quality.

这有助于降低口模压力，减少机械磨损或提高挤出生产率（高达21%）。

Analysis on warm extrusion process problems for constant velocity universal joint outer race

等速万向节滑套温挤成形工艺缺陷分析

If the loaded flat extrusion container is predigested as a model of a infinite plane with a ellipse hole in the center, the maximum theoretical stress is quite closed to that measured from the experiment.

如果把扁挤压筒的受力模型简化成中间带椭圆孔的无限大平面的弹性力学模型，理论最大应力值与实验结果比较接近。

The Development of Aluminium Extrusion Technology and Equipment in the World

国外铝挤压技术及其装备的进展

Technological Design of Cold Extrusion of Axial Parts Based on SolidWorks

基于SolidWorks的轴类件冷挤压工艺设计

The technological specification of the pole by the high speed warm extrusion was worked out.

拟制了磁极高速温挤压工艺规范。

Folding formed mountain and extrusion tectonic basin.

褶皱作用形成山地和挤压构造盆地；

A new tectonic model is proposed on the basis of studies of the Jurassic deformation styles and combination pattern of various tectonic zones on the western margin of the Ordos basin and its adjacent areas, that is the lateral extrusion tectonics with restricted boundaries.

在鄂尔多斯盆地西缘及邻区各构造带侏罗纪变形样式和组合规律研究的基础上，提出了一种新的构造模式，即具限制性边界的侧向挤出构造。

After that, the study area is likely to be gone through three major tectonic phase before the formation of such disharmonic folds: the initial rapid extrusion, the deformation of the mid-back and low-speed extrusion late.

经推测，研究区很可能是经过了三次主要的构造期才形成这种不协调褶皱：初期的快速挤压、中期的变形回复以及后期的低速挤压。

The pluton formed in a extrusion setting, the post-collision tectonic stage, in other words, that is volcanic arc areas of the mainland.

扎合岩体形成的构造背景为后碰撞阶段的挤压环境，即大陆火山弧地区。

The extensive development of the basin into the east-west fault structure, has gone through the region of fracture dynamics tensile, Extrusion, regional depo-sition, squeezing the strike-slip tectonic evolution stage.

盆地内广泛的发育有近东西向的断裂构造，在断裂动力学上先后经历了区域的拉张，挤压，区域沉积，挤压走滑等构造演变阶段。

Study of the high speed extrusion property of PE for telephone cable

聚乙烯绝缘市话电缆高速绝缘挤出性能研究

High Speed Extrusion and Coating Property of PE for Telephone Cable Insulation Material

聚乙烯电话线缆绝缘料高速挤出包覆性能研究

According to the characteristic of SMDS, a special automatic extrusion device for sacrificial support material was designed. The device includes three parts& the screw extrusion unit, the temperature control unit and the stepping motor drive unit.

本文根据该工艺的特点，设计开发了适用于分段堆积/雕铣成形支撑材料的自动挤出装置，包括螺杆挤出单元的结构设计、温度控制单元设计和步进电机驱动单元设计三个部分。

During conventional hot extrusion processes, temperature and distortion of the billets change unevenly, so the dimension, shape, organization and capability of the profile will be deterioration.

在常规的铝及铝合金热挤压过程中，金属的温度和变形是很不均匀的，这将导致产品的尺寸、形状、组织和性能等质量方面的缺陷。

When extrusion granulating, the temperature of head and homogenizing zone in extruder should be strictly controlled;

挤出造粒时，应严格控制机头和均化段温度。

The forming performance of aluminum hot extrusion without discard technology was studied under varied extrusion ratio, temperature and ratio of aluminum/ salt.

采用不同挤压比、不同加热温度和不同铝/盐比的实验条件，研究了铝材无压余热挤压工艺的成形性能。

Extrusion Pneumatic Conveying Pressure Drop Dynamic Triaxial Test on Elongation and Tensile Characteristics of Soil

挤压流型气力输送的阻力特性动三轴试验的压缩和挤压伸长特性

Homogenization treatment before the extrusion coarsened the grain size and reduced the tensile strength and yield strength.

挤压前均匀化热处理使挤压态合金的晶粒尺寸粗化，拉伸强度和屈服强度降低。