fabricated的例句大全

Under a certain condition, this interface impendance can be transferred to the constant phase angle ( CPA) impedance. Filters, couplers and baluns are fabricated in the high frequency passive device integration regions.

在一定条件下，此界面阻抗过渡到恒相角阻抗。滤波器、合器和平衡非平衡阻抗转换器系制造在高频被动元件整合区域内。

Analysis on test pile of fabricated pile of one engineering

某工程预制桩试桩结果分析

A series of transparent polyimide/ silica ( PI/ SiO2) hybrid films were fabricated via sol-gel process using hydrolyzed tetraethoxysilane ( TEOS) under base condition.

采用碱催化正硅酸乙酯的溶胶/凝胶工艺制备了一系列透明聚酰亚胺/二氧化硅（PI/SiO2）纳米杂化薄膜。

Different thickness of SiO2-encapsulating layer was fabricated by the hydrolysis of tetraethyl orthosilicate in isopropanol solution.

再通过正硅酸乙酯在异丙醇溶液中水解包覆了不同厚度的Si02层。

And then with powder metallurgy technology, graphite-Cu matrix composite, short CF of electroless copper plating and short CF of electroplating copper reinforced graphite-Cu matrix composite were fabricated.

用粉末冶金的方法制备了石墨-铜基复合材料、化学镀铜短碳纤维/石墨-铜基复合材料和电镀铜短碳纤维/石墨-铜基复合材料。

Temper Brittleness of High Temperature Reactor Fabricated by Cr-Mo Steel and its Reactors

Cr-Mo钢高温反应器的回火脆性及控制

Microstructure and Properties of Magnesium Matrix Composite Fabricated by Low Temperature Reaction Melting

低温反应自熔制备Mg基复合材料的组织与性能

In-Situ Fabricated MgO Particulate Reinforced Magnesium Matrix Composite by Low Temperature Reaction Melting

低温反应自熔法原位合成MgO颗粒增强镁基复合材料

Adopting a novel synthesizing method-low temperature reaction melting ( LRM), a MgO particulate reinforced magnesium matrix composite was in-situ fabricated using pre-oxidized Mg powders. The microstructures and mechanical properties of the composite were investigated by microstructure observation and tensile tests.

采用低温反应自熔新工艺，由经过预氧化的Mg粉原位合成了MgO颗粒增强镁基复合材料，并对其显微组织和力学性能进行了检测。

In_2O_3 nanowires are fabricated successfully with a high temperature tube furnace.

使用管式加热炉成功地制备出In2O3纳米线。

Antimony doped tin oxide ( ATO) solid and hollow spheres were fabricated by reducing ATO nanoparticles with graphite as the reducer in the high temperature tube furnace.

通过在水平管式炉中用石墨还原锑掺杂二氧化锡（ATO）纳米颗粒的方法制备了ATO的实心球和空心球，并用EDX和XRD等技术分析了产物的物相和元素组成；

Construction technology of three kinds of temporary support for fabricated beam

装配式梁（板）桥三种简易临时支座的制作

The sturcture, density, hardness, compression modulus, tensile strength, stress relaxation, permanent deformation properties of foam fabricated by blending silicone rubber and EPDM were studied.

研究了硅橡胶/三元乙丙橡胶（Q/EPDM）配方对泡沫合金的结构、密度、硬度、压缩、拉伸、应力松弛等力学性能的影响规律。

Al-Cu-Ni ternary alloy powders were fabricated with a new solid-liquid reaction milling technology.

利用固液反应球磨技术制备了Al-Cu-Ni三元合金粉末。

A CMOS symmetrical three-valued ternary logic circuit was designed and fabricated, based on the information associated with symmetrical ternary logic combined with CMOS circuit processing features.

根据有关对称三进制逻辑的资料，结合CMOS电路生产工艺特点，设计并试制了对称三值逻辑CMOS系列电路。

Porous silica ceramics with low density were successfully fabricated by a novel tert-butyl alcohol ( TBA)-based gel-casting method. The effects of solid loading and sintering temperature on the microstructure, phase, pore size distribution and physical performance were studied.

研究了不同固相含量和烧结温度对制备二氧化硅陶瓷显微结构、性能、物相以及孔径分布等方面的影响。

Nano-scale composite ceramic coating on Q235 was fabricated by thermochemical reaction method, and then structural analysis and performance test were conducted of the coating.

采用热化学反应法在Q235钢上制备纳米复合陶瓷涂层，对涂层进行结构分析及性能测试。

At last, combining the technology of injection molding and combustion synthesis, h-BN+ SiC thermocouple-protection tube were fabricated.

结合注射成型技术和燃烧合成技术，成功制备了h-BN+SiC复合陶瓷陶瓷热电偶保护管。

The polysilicon-metal thermopile infrared detector with 76 couples is fabricated using silicon integrated The information integration of big group technology

所制温差电堆最大集成达76对.大成组技术的信息集成

Composites fabricated from glass fabric stacking with thermoplastic PPS powder ( powder technology) was evaluated.

研究聚苯硫醚（PPS）树脂粉与玻璃纤维织物（GF）叠层模塑（粉末工艺）制复合材料的工艺与性能。