flange plate的例句大全

In order to fully used the compression resistance of the concrete, this paper analyzed the stress distribution to the composite beam in the actual use, and put forward to the method calculating the concrete flange plate thickness.

为充分利用混凝土的抗压性能，本文通过分析钢与混凝土组合梁使用阶段的应力分布，提出了一种确定钢梁上混凝土翼板厚度的方法。

for wfp connection, the flange plate was welded to beam flange by fillet welds, and welded to column flange by butt welds, while the beam flange was free to column flange.

焊接翼缘板式加强连接（WFP）是一种钢结构改进型刚性连接，加强板与梁的翼缘采用角焊缝连接，柱翼缘采用对接焊缝连接，梁翼缘不直接与柱翼缘连接。

frequency property about flow induced oscillation of cavity without flange plate

不带导流板矩形腔的流激振荡的频率特性

The composite beam is a component comprised the steel beam and the concrete flange plate beam.

组合梁是钢梁和其上混凝土翼板共同抗弯的一种构件.

Under uniformly distributed load, the disposal of cables has obvious influence on shear lag effect in bottom flange plate of box girder of single tower cable-stayed bridge, but disposal of tower has little influence on it;

在均布荷载作用下，斜拉索的布置形式对独塔斜拉桥箱形主梁底板的剪力滞效应有明显的影响，而桥塔的形式对主梁的剪力滞效应基本没有影响；

KRH flexible coupling of housing is a product of replacing flange plate.

KRH型卡箍式柔性管接头是传统的法兰盘的替代产品。

Check valve flange plate.

止回阀法兰碟阀.

A of butterfly valves LT. Check valve flange plate. These products exports a single mechanical processing.

蝶阀A型LT型. 止回阀法兰碟阀. 上述产品出口单件的机械加工.

Under dead and live loads, the shear lag effect in box girder of cable-stayed bridge with single tower and single cable plane is comparatively complex, and the shear lag phenomenon in the top or bottom flange plate at positions adjacent to different web plates is variational;

在恒载和活载作用下，独塔单索面斜拉桥箱形主梁的剪力滞效应比较复杂，在顶板或底板的不同肋板处剪力滞现象也可能各不相同；

By means of finite element program, thickness of end-plate and stiffen of column flange affect to connection performance are analyzed.

并通过有限元程序分析了端板厚度、柱翼缘板刚度对连接性能的影响。

On quality control of plate flange joint construction in metal rectangle air ducts

金属矩形风管共板法兰连接施工质量控制

A wear-resistant bushing is sheathed on a tail end sleeve end tube, and a flange of the bushing is pressed between the tail wing plate and the tail end sleeve tube.

尾端套管上穿套一个耐磨轴衬，轴衬凸缘被压在尾翼板和尾端套管之间。

Process and method to solve the problem of retarded material in the extruder during production by way of improving taper angle of screw head, connector flange and structure of perforated plate are presented.

介绍了通过改进螺杆头锥角、连接件法兰以及多孔板结构以解决挤出机生产过程中滞料问题的办法。

for the cover of rolled stainless steel plate welded shape, cover and vacuum sealing flange at the end of the trough of large vertical lathe machining fine car molding.

内罩为不锈钢板卷制密焊成型，罩底法兰和真空密封槽由大型立车精车加工成型。

the wing beam generally by the flange, the web plate and the prop constitution (likechart shows).

翼梁一般由凸缘、腹板和支柱构成（如图所示）。

JAW CHUCK ＆ FLANGE 、 DRIVEPLATE 、 FACE PLATE 、 STEADY REST ( LESS THAN 2000 MM ) 、 FOLLOW REST ( LESS THAN 2000 MM ) 、Φ130 SPINDE BORE 、 ELECTRIC TURRET 、 ELECTRIC QUILL 、 TAPER TURNING ATTACHMENT.

四爪卡盘及法兰、花盘、拨盘、中心架 ( 2米以下)、跟刀架 ( 2米以下 ) 、Φ130孔径主轴、电动刀架、电动尾座、锥度靠模尺.

Ultimately, the tension flange and end-plate can be simplified as T-stub on the assumption that the axial forces of bolts in tension zone are equal to each other.

极限状态下，受拉翼缘和端板可简化为等效T型件。

Using exposed upper flange fixing bolt which makes it convenient to replace rubber plate.

上箱法兰固定螺栓采用外露式,便于更换橡胶板.

The purpose of this essay is to analyse the performance of the joint when no stiffing plate were planted inside the box-column at the position which at the same hight of the tension side of the beam flange.

本文的目的，就是分析梁受拉翼缘处，当箱形柱内不设置加劲肋时节点的受力性能。

This information can be found on the flange or terminal block of the element or on the water heater data plate.

有关参数可以在加热元件的法兰或接线盒上找到，或者在热水器的参数板上找到。