flanges的例句大全

rotodynamic pumps. forces and moments on flanges. horizontal shaft centrifugal and mixed flow pumps.

转子动力泵.法兰盘受力和力矩.卧轴离心泵和混流量

When bolting to steel flanges, longer bolts or stud may be required.

当用螺栓与钢法兰连接时, 可能需要更长的螺栓或螺杆.

Add sealed shim between the two flanges and then lock down the bolt equably.

法兰间连接需加装密封垫片后再均匀拧紧螺栓.

There are two flat area profile on both flanges.

两个法兰凸缘都有平面区域.

Easily installed, with gasket, between standard class 125 flanges.

安装容易, 带垫圈, 位于标准125磅级法兰之间.

The flanges are all forging to ensure the quality of welding seam.

法兰部分全品使用锻造产品,确保焊缝质量.

The engine-feed system interface is at the turbopump inlet flanges.

发动机与供应系统的交界是在涡轮泵的进口法兰盘处.

Lower the valve into position between the pipeline flanges.

将阀门放低,使其进入管道法兰之间的位置.

Provide steam rings for tube side inlet and outlet flanges.

管程的入口与出口法兰配备蒸汽环.

Flanges are used extensively for connections where removable system components are designed.

法兰作为连接方式广泛应用在设计要求可拆卸系统部件的地方.

Closure flanges may be mechanically seamed or welded in place.

封闭装置凸缘可用机械方法或焊接方法洽当接合.

For motor operation gear box is provided with standard mounting flanges.

对于电机操作机构,齿轮箱配置标准安装法兰.

Remove the all of urethane from all pinchweld flanges.

由夹紧焊接凸缘去除所有尿烷.

At bottom of the flanges, there are tapped plugs for water drainage.

在进出水法兰的底部有放水用的螺塞.

It is much easier to install between standard gaskets and line flanges.

在标准垫圈和管道法兰之间也更加容易安装.

Has through-bolted, rigid flanges matching B 16.5 Class 150 regular, short-body type.

具有贯穿螺栓, 坚固的法兰,符合B16.5,150磅级的常规 、 短阀体类型.

During fabrication slots for the stringers flanges were flame cut into box girders.

制造时,为安装纵梁翼缘,在箱型梁中用焰割法开槽口.

Blind flanges and gaskets shall be chosen according to system testing pressure.

试验用的盲板法兰和盲垫应与管线试验压力相匹配.

Mating pipeline flanges shall be standard reducing flange with I. D . to exactly match valve I. D.

匹配的管道法兰应该是标准的缩小法兰,其内径应该与阀门的内径完全一致.

They are clamped between mating flanges which are connected by studs and nuts.

这种阀门夹紧在采用螺栓和螺母的配套法兰之间.