fluid control的例句大全

The process loop mainly includes the feed-in aluminum clinker control loop, the red mud adjusting fluid flow control loop and the carbon adjusting fluid flow control loop.

过程回路控制包括熟料下料量控制回路、赤泥洗液流量控制回路和碳分母液流量控制回路。

The influence of fluid tank volume on hydraulic contamination level is analyzed, and small size tank design theory is proposed. New theoretical foundation is provided for contamination control of hydraulic system.

建立了液压系统污染控制的数学模型，分析了油箱容积对液压系统油波污染度的影响程度，提出了小油箱设计理论，为液压系统油液污染控制提供了新的理论依据。

MEG drilling fluid had better formation damage control. WEN 5-41C had a 14. 4 t BOPD and this was greater than that of WEN 5 BLOCK by 128. 4%. SHEN-128C well is a unique gusher well in the SHEN 229 BLOCK presently.

油层保护效果好，其中温5-41C井日产油14.4t，同比温五区块平均产量提高了128.4%，神218C井是神229区块目前唯一的自喷井。

problems such as bentonite content, control of fluid loss and theological properties existed in the application of mixed metal hydroxide ( mmh) are discussed. mud property design criteria for wells at depth of about 3000 meters are given.

针对目前MMH泥浆使用中的一些问题，如失水控制、膨润土含量、粘度控制等进行了讨论，介绍了华北油田井深3000m左右井的MMH泥浆性能控制标准。

development of web-based multimedia cai courseware of fluid driving and control

基于Web的《液压传动与控制》多媒体CAI课件开发

fluid drive and control.

液压传动与控制。

In order to survey the causes of 25 cases of fluid infusion reation and to control the incidence of fluid infusion reaction, epidemiological and laboratory methods were used to examine the bacterial contamination of air of treatment room and endotoxin on infusion apparatus.

为调查25例输液反应发生原因，控制输液反应发生率，采用流行病学方法和实验室方法对治疗室空气细菌污染情况及输液器材的内毒素进行了检测。

The control theory method only needs double time of the fluid field computation to obtain the global gradients, through solving the adjoint equations of the governing equations.

通过求解共轭方程来得到目标函数对于设计变量的梯度，再利用所求的梯度进行优化设计，只需要花费两倍求解流场的时间。

Heat Resistant and Salts Tolerant Polymer Gelling Fluid JST for Water Control: Laboratory Results

JST耐温抗盐聚合物冻胶体系的研究

The closed flow separation and reattachment will result in the significant energy loss, which will bring the remarkably negative effect on the performances of fluid mechines, so the control of separation is regarded as one of the key problems of fluid engineering research.

闭式流动分离和再附伴随着较大的能量损失，对流体机械的性能影响很大，分离结构的控制已经成为流体机械工程中的一个研究重点。

When the control valve when the reverse, so that both fluid along the direction of movement of spool when closed, the flow control valve capacity will be increased.

当调节阀反向使用时，既流体沿着使阀芯关闭的方向流动时，调节阀的流通能力会增大。

WEDM include: high-frequency pulse power, wire tube, machine bed, the working fluid circulation system, motion control components.

电火花线切割机床包括：高频脉冲电源、丝筒、机床床身、工作液循环系统、运动控制等部分。

The Experimental System of Integrated Transmission Fluid Process Control Based on Network

基于网络的流体传送过程控制综合实验系统

Capillary pumped loop ( CPL) is an advanced temperature-control device. Heat transfer in CPL is realized with phase transition of working fluid, and the capillary pressure is used for overcoming the resistance in circulatory flow.

毛细抽吸两相流体回路（简称CPL）是一种先进的控温装置，它采用相变传热方式并利用毛细力来克服工质循环流动的阻力。

The results show that control factors of remaining oil distribution including deposition model, fault, microstructure, fluid property, well pattern perfection and no equilibrium of reserves put to use.

结果表明，剩余油的控制因素包括沉积模式、断层、微构造、原油性质、井网完善性及储量动用不均衡性等。

Research on Fluid Position System Based on Fuzzy PID Control and Industry Configuration Technology

基于模糊PID与组态技术的液位控制系统的研究

MRF ( magneticcurrent recharge fluid) damper changes magnetic field via coil current to adjust flow of magnetic current recharge fluid in damp channels, control of damp fore of damper is realized.

磁流变液减振器，通过线圈电流改变磁场调节磁流变液在阻尼通道中的流动，实现对减振器阻尼力的控制。

The guide valve control the pressure oil to drive the main vale so as to accomplish the pressure fluid in the sealing space to be on and off, which can assure the shutter BOPs to take action at the condition of pressure balance during the working time.

工作时，先导阀控制液压油驱动主阀实现井口密封空间中压力液体的开通和关断，从而实现闸板防喷器在其上下压力平衡的条件进行开关操作。

Such kinds of problems have great significance in the fields of population prediction and control, porous media fluid mechanics, financial mathematics and other applied science.

此类问题在人口预测与控制，多孔介质流体力学，以及金融衍生产品定价等许多应用科学领域有重要意义。

Control System Design of Fluid Viscous Equipment for Speed

差动轮系液粘调速装置控制系统的设计