fluid dynamics的例句大全

The visualization of computational fluid dynamics is achieved by calling MATLAB engine in FORTRAN program.

在计算流体力学的FORTRAN计算程序基础上，通过调用MATLAB引擎函数实现了计算结果的可视化处理。

Computational Fluid Dynamics ( CFD) is used to analyze the fluid flow and heat transfer, which can provide overall flow status and local data in tank.

计算流体力学（CFD）是一门用于分析流体流动、传热等现象的学科，CFD能够给出搅拌釜内的总体流动状况和局部详尽信息。

Modeling and simulation based on computational fluid dynamics and heat transfer for the metal structured packed bed were carried out to predict the flow field and temperature field, and to evaluate its performance in heat transfer and hydrodynamics.

运用计算流体力学（CFD）与计算传热（CHT）方法，对结构化金属填充床内的流体动力学和传热特性进行了详细的模拟，以预测其流场和温度场。

In this paper, the technique of computational fluid dynamics ( CFD) is adopted to simulate the air distribution of the dynamo floor and the hydraulic floor.

在此基础上，本论文利用CFD技术对西龙池地下水电站发电机层、水轮机层的气流组织进行了数值计算。

This paper overviews the application of computational fluid dynamics in liquid propellant rocket engine, presents its trends of development in future.

对计算流体动力学（CFD）在液体火箭发动机中的应用情况进行了全面的回顾与分析，提出了今后的发展趋势与方向。

According to the unsteady flow of the metal, the VOF method which is widely used in the Computational Fluid Dynamics is induced into the catch of the metal free surface. The flowing trend of the metal free surface is simulated factually and good surface finish is obtained.

针对材料的非稳态流动，将计算流体领域广泛应用的VOF方法引入铝型材挤压过程中的金属流动前沿的动态捕捉中来，真实地模拟了金属前沿流动趋势，得到了良好的表面质量。

In the end it achieves the procedural quantitative calculation and error analysis about the optical trapping transverse force using Stokes formula of Fluid Dynamics.

最后应用流体力学中的Stokes公式对实验得到的横向光阱力进行程序化的定量计算及误差分析。

Computational fluid dynamics methods were applied to obtain the static velocity distributions in the main stage channel of the valve with different structure parameters or different pressure and flow rate.

应用流场数值模拟技术，在不同结构参数、压力、流量等条件下，对先导式纯水溢流阀主阀流道内的流场流态进行动态仿真。

Using computational fluid dynamics ( CFD) method we studied the critical flutter wind speed of bridge box girder with or without central slot. The results show that the shape of section head and width of slot have large impact on the effect of slot.

用计算流体动力学（CFD）方法研究了箱型桥梁断面中间开槽前后颤振临界风速的变化，结果表明中间开槽的效果与断面头部形状和开槽宽度有密切关系。

Numerical Simulation of Hydraulic Turbine and Hydropower Station Tailrace System Based on the Computational Fluid Dynamics

基于计算流体动力学的水轮机及水电站尾水系统数值研究

Based on the computational fluid dynamics software FLUENT, is used to numerically simulate two-dimensional rectangular sedimentation tank model which was established by Dr.

本文采用计算流体力学软件FLUENT对1983年加拿大温莎大学Imam博士建立的二维矩形沉淀池模型进行了流场的数值模拟。

In this paper, a mature computation fluid dynamics software FLUENT and modeling software GAMBIT were used to analysis the flow field of the rotor spinning rotor.

本文利用了目前较为成熟的计算流体动力学软件FLUENT和其建模软件GAMBIT对转杯纺转杯内气流场进行以下几方面研究。

On the basis of comparison, the spiral cyclone separator is selected as the dust removal device of the refrigerant cooler used in dusty environment, and numerical simulation on the separator is completed by the computational fluid dynamics ( CFD) analysis method.

通过分析对比，本文选择螺旋旋风分离器作为多尘环境下冷媒式冷却器的除尘装置，并利用计算流体力学（CFD）分析方法，对分离器进行了数值模拟仿真。

in the paper, the air flow process and combustion process in the cylinder of the direct injection gasoline engine during the intake process has been simulated numerically using three-dimensional fluid software fire, based on computational fluid dynamics auxiliary analysis on internal combustion engine theory.

基于计算流体力学辅助内燃机分析理论，利用三维流体软件FIRE对发动机进气过程对点火室式直喷汽油机缸内的气流运动过程及燃烧过程进行了数值模拟。

Developments in the fluid dynamics and hydrocarbon migration of sedimentary basins

盆地流体动力学及油气运移研究进展

a three-dimensional mathematical model coupling electrochemical kinetics with fluid dynamics was developed to simulate the transport phenomena in planar anode-supported solid oxide fuel cell ( sofc) such as fluid flows, heat and mass transfer.

建立了平板式阳极支撑固体氧化物燃料电池的三维数学模型，通过耦合电化学动力学和流体动力学模拟了电池的传热传质等传输现象。

the flow field in tapered jacket-type flow distributor in heat exchanger is simulated with computational fluid dynamics(cfd).

采用计算流体力学方法对换热器夹套式变截面导流筒的流场进行数值模拟。

The fluctuating wind speed with Davenport Spectrum is generated, and the pressure coefficients of structure are gotten by using Computational Fluid Dynamics method.

最后，本文采用Davenport谱生成了脉动风速时程，利用计算流体力学方法得到结构的风压系数，对气枕式膜结构进行了风致响应分析，得到了结构在风荷载作用下的反应特性。

Computational Fluid Dynamics ( CFD) Analysis of Cooling Water Jacket in Diesel Engine

柴油机水套的计算流体动力学（CFD）分析

Computational fluid dynamics based sound path optimization for ultrasonic flow meter

基于CFD的超声波流量计最优声道位置研究