fluid phase的例句大全

Also studied the cylindrical fluid region and two-phase medium with the acoustic pressure within the region to increase the distance from the cylinder center was studied.

还研究了圆柱流体区域和双相介质区域内声压随离圆柱中心的距离增加的变化规律。

Experimental Study of the Characteristic and Mechanism of Body Fluid Metabolism at Acute Reaction Phase of Severe Acute Pancreatitis

重症急性胰腺炎早期体液代谢特点及机制

Based on the fundamental concept of the fluid compartment, a special gas migration pattern& pulse miscible phase flow, formed under certain geological conditions of high temperature, high pressure and confined formation, is studied.

从流体封存箱的基本概念出发，研究了在高温、高压、封闭地层这一特定地质条件下，产生脉冲式混相涌流这种特殊的天然气运移方式。

Application of Digital Image Processing Technique in Solid/ Fluid Two-Phase Flow Experiment

数字图像处理技术在固&液两相流实验中的应用

A three-dimensional CFD model using the volume of fluid ( VOF) method was presented for predicting the steady two-phase flow and heat transfer process.

利用流体体积法建立了蜂窝型加湿器的流体动力学模型（C FD），反映了稳态的三维气液两相流动的传热传质过程。

Fluid-saturated porous media fluctuation theory, the more traditional single-phase medium theory is closer to engineering practice.

双相界质（流体饱和多孔介质）波动理论较传统的单相介质理论更接近工程实际。

Fluid-solid coupled mathematical model for water-air two-phase infiltration and deformation of dual porous media

水气二相渗流与双重介质变形的流固耦合数学模型

A Two-Fluid Model Used In Gas and Liquid Two-Phase Slug Flow

气－液两相湍流流动的双流体模型与模拟

Perturbation Analysis of Boundary Layer on Liquid Phase Fluid Centrifugal Pump

液相流离心泵边界层的摄动分析

Experimental Study of Fluid Flow Velocity and Signal Intensity Measured by Phase-contrast Cine MRI

MRI电影相位对比法液体流速与信号强度的实验研究

Assuming laminar flow, using the volume of fluid ( VOF) model, setting gas-liquid two phases, specify the inter-phase interaction with surface tension and the contact angle between the liquid and wall.

采用层流假设，应用VOF模型，定义气液两相，设置两相间表面张力及液相与壁面的接触角。

Capillary Pumped Loops ( CPLs) and Loop Heat Pipes ( LHPs) are two-phase heat transport devices which utilize the capillary forces developed in evaporator wick to drive the working fluid. They are capable of transferring large heat loads over long distances with small temperature differentials.

毛细泵回路（CPLs）和环路热管（LHPs）是一类两相热传递装置，它利用蒸发器中毛细芯的毛细力驱动工质流动，具有传输距离远，传输功率大，温差小等特点。

Capillary pumped loop ( CPL) is an advanced temperature-control device. Heat transfer in CPL is realized with phase transition of working fluid, and the capillary pressure is used for overcoming the resistance in circulatory flow.

毛细抽吸两相流体回路（简称CPL）是一种先进的控温装置，它采用相变传热方式并利用毛细力来克服工质循环流动的阻力。

The micro fluid movement was described by N-S equation and continuity equation, the micro fluid energy transmission and the generations of the phase change were described by heat conduction equation and phase-change equation.

以电渗或压力驱动下不可压缩的牛顿流体为对象，使用N-S方程和连续性方程描述微流体的运动，使用热传导方程和相变方程描述制冷作用下微流体的能量传导以及产生的相变。

The two-fluid model was used for the two-phase flow. The standard k-ε turbulence model was employed. The average chemical reaction rate was approximated by the Eddy-Break-Up ( EBU) model.

两相流模型采用双流体模型，湍流模型采用标准k-ε模型，湍流燃烧采用涡旋破碎（EBU）模型，数值方法采用LEAGAP算法。

The mathematic model of turbulent gas-particle flows of remained propellant space emission is established by applying multi-phase fluid model of Euler theory.

应用Euler理论的多相流体模型，建立了剩余推进剂排放气-粒两相湍流流动的数学模型；

He swirling oil-water two-phase turbulent flow in a hydrocyclone has been simulated by using the two-fluid model with a k-ε-kp two-phase turbulence model.

本文应用双流体模型及k－ε－kp两相湍流模型，研究了水力旋流器内油水两相湍流流场。

The hydration process of the oil well cement of class G treated with different additives ( dispersant. retarder, fluid loss controller and latex) are investigated by determing the changes in the cement filtrate composition, in the particle size distribution and in the liquid phase conductivity.

通过测定加有不同外加剂的水泥浆滤液离子组成、讨论滤液中颗粒尺寸分布、测定水泥浆液相电导，分析了加有不同外加剂的水泥水化历程；

The complex fluid structure of two-phase flow will be a certain extent reflected on the dynamic image made by high-speed dynamic camera system.

一定程度上，两相流体复杂的流动结构能够反映在通过高速动态摄像仪捕捉的动态图像上。

In order to recognize the flow characteristics in a tapered affinity adsorption bed, FLUENT software was used in numerical simulation for the liquid-solid two phases flow. A two-fluid model of the liquid-solid in the ( tapered) bed was established based on the theory of two-phase flow.

为了分析流体在上流锥形亲和层析床中的复杂流动情况，运用二相流理论建立了上流锥形床中液固二相流模型，对上流锥形床中的流动状况进行了数值模拟。