fluid temperature的例句大全

the results show that the temperature rise of fluid co2 is little because of insulation measures like insulated tubing and n2 in casing annular and the temperature of co2 arriving bottom hole has larger difference as different injection rate.

计算结果表明，由于注入时间较短，且注入过程中采取使用隔热油管、环空内充氮气等保温措施，液态CO2温升较小；随着注入速度的变化，液态CO2到达井底的温度相差较大。

construction machinery-high temperature and high pressure hydraulic fluid power hose assemblies

工程机械高温高压液压软管总成

under cold sizing one understands the lubrication of warps with specific fluid sizing products at room temperature without drying.

在室温下，不需烘燥处理的专用浆液可以使经纱的润滑性能提高。

Subsurface temperature increases with burial depth might cause fluid expansion in most sedimentary basins.

在大多数沉积盆地中,地下温度随埋藏深度增高可能引起流体的膨胀.

A heat-transfer fluid with high temperature resistance was synthesized through benzylation of diphenyl.

以联苯为原料,通过苄基化反应合成高温导热油.

The ore-forming fluid is medium-low temperature, low salinity, and low fugacity of O 2 and S 2.

成矿流体为中低温 、 低盐度 、 弱酸性、低氧逸度和硫逸度.

This perforating fluid system is solid-free, high temperature resistant, stable, compatible, and not polluting.

该射孔液体系具有无固相 、 抗高温、密度可调 、 稳定性强 、 配伍性好 、 对环境无污染等优点.

Analytical solutions to the forced convective heat transfer of ideal fluid constant temperature, natural convective.

研究理想流体受迫对流传热和自然对流传热问题的理论解.

The modified technology improved the temperature field and fluid field of liquid steel in arc furnace, decreased the etch of bottom and gate of furnace and intensified the whirl of surface of liquid steel.

该项改进的技术改善了电弧炉内钢液温度场和流场，减少炉底和炉门局部侵蚀，加强钢水液面的旋转。

The order of temperature resistance and decomposition temperature of fluid loss additives is obtained.

通过差热分析和水溶液老化后的特性粘度测出了各种降滤失剂的耐温次序和分解温度.

To non-Newtonian fluid ( 2% CMC) system under torrential flow experiment condition, when the reaction heat is under 10kW/ m3, the system can be stabilized above 30 ℃ reaction temperature state by three heat pipes whose condensing apparatus are cooled by air nature;

对于非牛顿流体（2%CMC）体系，在湍流状态下，在反应热小于10kW/m~3时，采用冷凝端为空气自然冷却的三根热管完全能使体系稳定在30℃以上反应温度的条件；

At low room temperature we studied such influencing factors on the breakaway torque as injection quantity of magnetic fluid, number of sealing stages, and the standing time at normal temperature.

以-40℃，直径为140mm的磁性液体密封为例，在低温室内研究了影响磁性液体密封起动扭矩大小的因素，如磁性液体注入量，密封的级数、常温（15℃）下放置的时间等。

It is usually difficulty to obtain film coefficients between the working roll and the coolant fluid as we solve the temperature field of the roll.

工作辊与冷却液之间对流换热系数的确定是轧辊温度场分析的难点。

Study on the breakaway torque of magnetic fluid sealing at low temperature and large diameter

低温大直径磁性液体密封起动扭矩的研究

The simulation results show that the speed, the temperature and the viscosity of coolant fluid exert much influence on convection heat transfer;

结果表明，冷却液喷射速度和温度以及冷却液的粘度变化对对流换热特性有着明显的影响；

A key factor restricting the application of magnetic fluid rotation sealing at low temperature and large diameter is the high breakaway torque.

制约低温大直径磁性液体密封在实际应用中的关键因素之一是起动扭矩过大。

With the help of the process simulation software-PRO-ⅱ, the impact of variation of feedback temperature of rich absorption oil on the energy recovery and the operation of the main fractionator in fluid catalytic cracking or delayed coking units was analyzed in detail.

借助流程模拟软件PRO／Ⅱ详细分析了吸收稳定系统富吸收油返回催化裂化或延迟焦化主分馏塔温度对操作及热量回收的影响。

The temperature of the hydatid fluid, cyst wall and hepatic tissue around the cyst was detected respectively just after the HIFU irradiation.

照射后立即取出棘球蚴，分别测囊液、囊壁、距离囊壁5mm部位肝组织的温度。

Based on the Chapman-Enskog theory and Heyes equations, two correlation models, which can describe the diffusivity of simple fluid mixtures in porous media, are proposed as functions of the reduced temperature, density and pore width.

同时基于这些模拟值，参考CE理论和Heyes关系式，以对比温度、对比密度以及对比孔径为变量，关联出两个简单流体等摩尔混合物在微孔中扩散系数的计算模型。

The effect of inlet velocity of fluid on temperature distribution was analyzed.

分析了副槽入口风速等参数对转子温度分布的影响.