furnace system的例句大全

Technical Renovation for Φ 3600mm Water Gas Furnace System

Φ3.6m水煤气炉系统技术改造

An intelligent PID controller was proposed for a CaC 2 furnace system with three-phase current coupled.

针对 三相 电极电流耦合的电石炉系统,设计出一种智能PID控制器.

Future Lunar Exploration Optimization design-aside in two-appulse-one hydrogen chloride graphite synthetic furnace system

重返月球计划二合一氯化氢石墨合成炉系统设备的优化设置

A new type of hydraulic electrode clamp for ladle furnace system

钢包精炼炉新型液压电极夹持器

the results can provide computation references to the design and application of basic oxygen furnace system.

结果可为转炉系统的设计和应用提供计算依据。

third, may replace the pressure relief valve in the blast furnace system group to adjust the stable furnace top pressure.

可以代替高炉系统中减压阀组调节稳定炉顶压力。

Running stably analysis of the new furnace system

新建加热炉系统稳定运行分析

New Design for Temperature Control System of Resistance Furnace

一种新型电阻炉温度控制系统的设计

Aiming at the phenomenon of fire monitor probe frequent coking and clogging when coal qualities change or match coal combustion, retrofit the boiler furnace fire television monitor system in Daba Power Plant, so as to eliminate clogging.

针对大坝发电有限责任公司锅炉炉膛火焰电视监视系统，在煤质发生变化或进行配煤燃烧时火焰监测探头频繁的结焦、堵焦现象，对火焰电视系统进行改造，消除堵焦现象。

The transport system and horizontal furnace have been designed to grow tetracene crystals by physical vapor transport.

设计了水平沉积系统，物理气相生长了并四苯晶体。

Refitting Design of Temperature Test and Control System for Resistance Furnace Series SX

SX系列电阻炉温度检测与控制系统的改造设计

The main function of the system includes billet materiel tracking, billet temperature tracking, optimum heating control, continuous and swing movement control, furnace temperature optimum control for mixing loading, feedback control of billet temperature and so on.

其功能主要包括：钢坯物料跟踪、钢坯温度跟踪、钢坯优化加热控制、钢坯连续及摆动运行控制、钢坯混装炉温优化控制、钢坯温度反馈控制等。

The practical production test shows good system stabilization and mathematical model accuracy. The temperature tracking maximal deviation is 1.47%, and furnace temperature optimum setting value can meet heat treating technology needs, and the qualification rate of the billet is more than 98%.

经现场实际生产检验，系统运行稳定，模型准确可靠，温度跟踪最大误差1.47%，炉温优化设定值满足热处理工艺要求，热处理钢坯合格率达到98%以上。

Temperature Control System of Tracking Reference Output for Reheating Furnace

一种跟踪参考输出的加热炉温控系统

The paper introduces systematically whole and local heat treatment calculation methods, the design and disposal of heat furnace on spot, as well as ware and temperature survey system when large pressure vessel was under construction.

文章系统介绍了大型压力容器现场整体热处理和局部热处理的热量计算方法以及现场热处理炉、加热器、测温与控温系统的设计和布置。

Verification indicate this simulation system can simulate slab heating whole process and optimize slab running velocity and temperature condition schedule of furnace operation and provide on-line control with optimum data.

验证表明，该系统能有效地模拟钢板在炉内加热升温的全过程。可以对炉辊速度和炉区温度进行寻优计算，为在线控制提供辊速及炉温制度最佳数据。

The Application of Fuzzy Immune PID Control Strategy in Temperature Controlling System of Gas-heated Annealing Furnace

模糊免疫PID在燃气退火炉温度控制系统中的应用

Composition: The whole production line consists of lifting plate, loading and unloading plate, sealed box-type furnace, rinsing machine, tempering furnace and electric control system etc.

组成：整条生产线由剪式升降台、置料台、箱式炉、清洗机、回火炉及电气控制系统等组成。

This article conducts a analysis about the influence of furnace combustion dynamic caused by the tertiary air come from the pulverized coal system of the boiler imported from former USSR ЕП-670-13.8/545KT by means of testing, and puts forward the solution.

通过试验对漳泽发电厂苏制ЕП-670-13.8/545KT型锅炉制粉系统三次风对炉内工况的影响进行了分析，提出了解决问题的方法。

Experimental Study of Aerodynamic Characteristics in a W-shaped Flame Boiler Equipped with a Bin and Feeder System and Fed Tertiary Hot Air in the Boiler Furnace

中储式热风送粉W型火焰锅炉炉内空气动力场实验研究