fusion temperature的例句大全

analysis of coal ash fusion temperature using polynomial partial regression functions

煤灰熔融温度多项式模型的偏回归函数分析

The fusion time, fusion temperature, and equilibrium torque of rare earth stabilizer system were 2.5 min, 177 ℃, and 19.0 N · m, respectively, which were less than those of lead salt system, 4.3 min, 184 ℃ and 19.5 N · m.

稀土稳定剂体系的塑化时间、塑化温度和平衡扭矩分别为2.5min、177℃、19.0N·m，分别小于同配方铅盐体系的4.3min、184℃、19.5N·m。

Coal-ash fusibility exhibits corresponding relations to its chemical composition and mineral composition, in which acidic oxides can increase the ash fusion temperature, but the basic oxides play a role in helping fusion and can reduce the ash fusion point.

煤灰的熔融特性不仅与煤灰的化学组成有关，还与灰成分的矿物形态有关，其中酸性氧化物可提高煤灰熔融温度，碱性氧化物却呈现降低煤灰熔融温度与助熔剂的作用。

Many technical problems were solved with relation to low degree of coalification, low ash fusion temperature and low ash content.

解决了低变质程度煤、低灰熔点、低灰含量煤的气化技术。

employing support vector machine to predict the ash fusion temperature of coal blends

支持向量机技术在动力配煤中灰熔点预测的应用

yulin coal is a high quality one with high heating value, low ash, low fusion temperature and high reduction reactivity;

榆林煤属于高发热量、低灰、低灰熔点、高还原率的优质煤；

The mixture of KNO3/ KOH is used as alkali-fusion agent, the reactants are calcinated in a temperature programming from room-temperature to 650 ℃ and kept for 3 h, the melts were leached by boiled water;

KNO3/KOH作碱熔剂，程序升温至650℃，并恒温3h，然后沸水浸渍；

The pressure ramp and the temperature ramp stimulate together and finally provide a pressure-temperature fusion tactile for the user.

压力斜坡和温度斜坡共同作用可以为操作者提供压力温度融合触觉感觉。

In order to recycle Tokamak exhaust gases expelled from nuclear fusion reactors, the hydrogen isotope mixture gas which contain the impurities of oxygen and nitrogen has been purified by the means of the method of catalytic deoxygenization and cryogenic ( i.e. liquid nitrogen temperature 77.4 K) absorption.

为了回收利用核聚变反应堆排出的托卡马克废气，将含有氧、氮杂质的氢同位素混合气，通过催化剂脱氧，低温（774K）吸附的方法，进行了净化处理。

Vanadium alloys are better than ferritic/ matensitic as attractive candidate materials for neutron interactive structural components of fusion energy system, because of their high temperature strength, high thermal stress factor, low activation for neutron irradiation and so on.

作为聚变堆的候选结构材料，钒合金的高温强度，热能应力因子以及中子辐照低活化性能等等，相比铁素体/马氏体钢更优良。

A new method of measuring fusion speed and ion temperature of plasma with deuterium and tritium

测量瞬态氘氚聚变等离子体聚变过程及温度的新方法

Using CPSO-SVM and data fusion to calibrate temperature characteristic of thermal sensor

热导传感器温度特性的CPSO-SVM数据融合校正

Based on Data Fusion Technology Program-Controlled Switchboard Temperature Wireless Monitoring System Research

基于数据融合技术的程控交换机温度无线监控系统研究

The experiment shows that the tensile strength and elongation of monofilament depend largely on the processing temperature, morphology and fusion level.

实验还表明，单丝的拉伸强度和相对伸长率与它的加工温度、形态和熔化程度有密切的关系。

The Influence of Temperature and Shear Stress in the Fusion Process of U-PVC Dry Blends

温度和剪切力对U&PVC干混料塑化过程的影响

The strong dependence of fusion reaction rate on ion temperature leads to a thermal instability of D T burning plasma.

由于氘氚反应率与离子温度有很强的依赖关系，氘氚燃烧等离子体是热不稳定的。

fusion reaction temperature is 1 250 ℃; reaction time is 2 h.

熔融温度为1250℃，时间2h。

The progress in experimental research of nuclear fusion at normal temperature

常温核聚变现象实验研究

Research and Progress of Nuclear Fusion Phenomenon at Normal Temperature

常温核聚变现象的研究和进展

A possible explanation of the room temperature nuclear fusion

室温核聚变的一个可能解释