fusion welding的例句大全

Numerical Simulation on Residual Stress Fields and Temperature Fields of Weld Joint in the Process of Fusion Welding

熔化焊焊接接头的温度场和应力数值模拟剂油短时接触催化裂化工艺及催化剂

In this thesis, using the vacuum hot pressing diffusion welding ( Vacuum Hot Pressing Diffusion Welding), which is called VHP for short, can achieve the bonding of industrially pure titanium and pure copper.

本课题采用真空热压扩散焊接（Vacuum Hot Pressing Diffusion Welding），简称VHP来实现工业纯钛和工业纯铜的扩散连接。

The characteristic of titanium and steel direct fusion welding, microstructure and phase composition of the welds are analyzed, the mechanism of brittle crack in titanium-steel fusion welds is discussed and approaches to join the titanium and steel are proposed.

分析了钛钢直接熔焊的焊接特点，焊缝的组织和相组成，论述了钛钢熔焊焊缝脆裂的机理，提出了钛钢焊接的途径。

Because of the high activeness of the titanium alloys, the inert gases or vacuum shielding is needed in fusion welding.

由于钛合金的活性强，熔化焊时需要用惰性气体或真空进行保护。

Because of high thermal conductivity, welding of copper and its alloys is usually difficult by conventional fusion welding processes. The heat input required is much higher than that in almost other materials, and the welding speed is quite low.

由于铜及其合金具有很高的导热系数，使用传统的熔焊方法焊接通常是很困难的，焊接过程中需要很高的能量输入，而且焊接速度较低。

Design of butt-fusion welding machine controller based on ARM

基于ARM嵌入式热熔焊接机智能控制器的设计

fusion welding repair process of unbinding defects on clad steel

复合钢板未结合缺陷的熔焊修补工艺

introduces the new type connecting technology, pouring welding technology for connecting between short net copper pipe and soft cable, after compared with the contact connecting method to the circular conical surface. the author demonstrates by evidences the advantages of pouring fusion welding connecting technology.

介绍在短网铜管与软缆接线板之间一种新型连接技术&浇铸熔焊技术，在与圆锥面接触连接方式作了比较后，用实例佐证采用浇铸熔焊连接技术的优越性。

Thereford, the butt fusion welding machine based on 80 C 196 chip microprocessor is developed by Tianjin University.

研制了基于80C196单片机控制的塑料压力管道热熔对接焊机.

The metallograph of weld cross sections is prepared after welding, and the fusion zone dimensions are obtained.

焊后制备了焊缝横截面宏观金相图片，获得了不同工艺条件下的熔合区形状与尺寸。

The research on fusion bonding behavior of energy director ensures its advantaged influence ultrasonic plastic welding.

对导能筋熔接行为的研究,明确了导能筋焊口结构形式的积极作用.

c , . incomplete fusion prevent adopting greater welding current, use correctly to weld the cleaning of operating, notice groove position.

未熔合的防止采用较大的焊接电流，正确地进行施焊操作，注意坡口部位的清洁。

Heat and time adjustment of spot welding process are made through the best fusion arithmetic adapting combined, average and decision making methods.

采用结合法、平均法和决策法相结合的最优融合算法，实现了点焊过程热量调节和时间调节。

control of special root incomplete fusion flaw produced by fibrin root welding

纤维素根焊特殊根部未熔合缺陷的控制

Ultrasonic plastic welding ( UPW) is a cost-effective, efficient and clean fusion bonding technique of TPC ( Thermal Plastic Composites), and of great value in application.

超声波塑料焊接是一种经济、高效、环保的热塑性塑料连接新工艺，有极大的推广应用前景。

Qualification and Research on the Cold Crack Sensitivity for the Fusion Zone of 9% Ni Steel Welding

9%Ni钢焊接熔合区的冷裂敏感性评定与研究

The laser-arc hybrid welding can improve the depth of fusion, welding speed and assembly gap, so it is a new and promising thermal source for welding.

激光-电弧复合热源焊接可以增大焊接熔深，提高焊接速度，增大装配间隙，是一种很有前途的新型焊接热源。

effect of welding parameters on fusion ratio of butt weld

焊接工艺参数对对接焊缝熔合比影响的研究

Element mixing distribution and structure feature of fusion zone in laser welding between different alloys and pure titanium

异种合金与纯钛激光焊接熔焊区元素混熔分布及组织结构特征关于｛x／n｝的分布

Formation and characteristics of the fusion zone in dissimilar steel welding joints

异种钢焊接熔合区的形成及其特征