gas inlet的例句大全

And using FLUENT software to model and analysis the gas inlet scheme and intake structure in detail.

并用流体分析软件FLUENT软件对进气情况进行建模分析，对天然气的进气方案和进气结构做了详细分析。

Reaction may take place in the center of the reactor if reasonable structure and gas inlet condition are adopted. Accordingly, the possibility of scale deposition may be reduced. In the meantime, a new way of designing oxidation reactor using aerosol dynamics model is presented.

认为结构与气体入口状况决定流场和浓度场，采用合理的结构与气体进口条件可以使反应在反应器中心进行，从而减少结疤的可能性，并提出采用气溶胶动力学模型来设计氧化反应器的思路。

an anode side of the electrode group is provided with at least one aeration pipe, and a gas inlet is connected with the aerator;

电极组的阳极边设至少一个曝气管，气体进口与增氧机连接；

The utility model is composed of a housing, a water inlet pipe, a gas inlet pipe, a water outlet pipe, a hollow sphere, a check valve, etc.

其主要结构由外壳、进水管、进气管、出水管、空心球体、止回阀等构成。

Flow Field Optimization of the Gas Inlet of Heat Recovery Steam Generator

压力可控式燃烧器余热锅炉入口烟道流场优化

The main characters of Corex gas reduction process are large amount of CO_2 removal, high carbon content in DRI, low reduction rate, and tem-perature rising at gas inlet of shaft furnace.

CO＿2脱除量大、产品碳含量高、还原速率下降及入口温度上升是还原工艺的主要特点。

In the absorption experiments, mass transfer is strengthened with the tangential gas inlet.

在溶液吸收实验中，通过切向进气孔实现了传质效果强化。

the premixing chamber is connected with an air inlet and a fuel gas inlet;

预混合室接空气进口和燃气进口；

Effect gas inlet pressure, geometrical de-sign and relative position of metal delivery tube, atomization gas, etc.

本文研究了雾化压力 、 导液管的几何形状和相对位置以及雾化介质等因素对雾化过程导液管末端气体射流与金属液流作用区压力特征的影响规律.

a gas inlet of a spray purifying column is communicated with the main kiln inner cavity, and a gas outlet thereof is communicated with a chimney.

喷雾净化塔的进气口与主窑内腔连通，其出气口与烟囱连通。

The calculation results show that temperature drop under fixed gas inlet area is more than that under unfixed gas inlet area.

计算结果表明，固定燃气入口面积较不固定燃气入口面积对燃气的降温量大；

In which, the waste heat from the turbine exhaust is recovered to drive CO_2/ NG reformer, and the lower temperature heat is provided with the ammonia absorption refrigeration cycle to generate chilled media used for cooling the turbine inlet gas.

其中，采用天然气CO2转化化学回热回收较高温度的燃气透平排气热量，采用氨吸收制冷循环回收较低温度的排气热量，并利用制冷循环产生冷量作CO2循环压气机进气冷却。

Gadget Jacket Charged by the Sun This paper introduces TMC ( thermal management controller), which can realize the functions of controlling inlet temperature of gas engine jacket water, polytype heating output and thermal management.

本文介绍了一种既可以控制燃气内燃机缸套水温，又可以实现多种类热用户热量输出和热能管理功能的热能管理器，并对其热能管理思路和设计过程进行详细阐述，给出了设计实例。

The results show that the reaction profile of diesel fuel exhaust gas reforming was significantly influenced by the reformer inlet temperature with or without catalyst.

结果表明，无论有无催化剂，重整器入口温度是影响柴油重整反应的主要因素。

Research on Inlet and Outlet Configurations of Gas-Solids Cocurrent Downflow Reactors

气固并流下行床反应器出入口结构研究现状与展望

Increasing turbine inlet gas temperature is one of important means to improve turbine efficiency and increase thrust-weight ratio.

提高涡轮前燃气温度是提高涡轮效率、增加推重比的重要手段之一。

Analysis result shows that the great temperature decrease in reaction oil and gas pipe inlet is the main cause. So a section of jacketed pipe is used in front of the inlet.

经过分析后认为，入口处反应油气管温度下降幅度较大是造成反应油气入口结焦严重的根本原因。

Selection of Inlet Air Cooling Technology for Gas-turbine

燃气轮机进气冷却工艺的选择

Experimental study on gas turbine inlet air cooling by using CO_2

CO2应用于燃机进口空气冷却的实验研究

The Analysis of Gas Turbine Generating Unit Inlet Air Cooling Based on The Liquefied Nature Gas ( LNG) Chill

液化天然气（LNG）冷能用于冷却发电燃气轮机进气的分析