glass analysis的例句大全

High temperature microscope for glass analysis of sintering, surface tension, softening point, melting and compatibility.

高温显微镜,用于烧结, 表面张力, 软化点, 融化和兼容的玻璃分析.

The thermodynamic properties of P_2O_5-SiO_2-Na_2O-Al_2O_3 glass system were investigated by means of differential scanning calorimetry and thermo-mechanical analysis. The characteristic temperature and the thermal expansion coefficient of the system with different SiO_2 contents were then discussed.

采用差式扫描量热法（DSC）和热机械分析（TMA）方法研究了P2O5SiO2Na2OAl2O3玻璃系统的热力学性质，探讨了磷酸盐玻璃中不同二氧化硅含量对其特征温度、热膨胀系数的影响。

Thermal Analysis of Glass Mould on the Basis of Pro/ E and ANSYS

基于Pro/E与ANSYS的玻璃模具热分析

The fast analysis method of Si-Al-Ca ternary system glass

硅、铝、钙三元系统玻璃快速分析法

Relationship between test frequency and glass transition temperature was studied for four TATB based PBXs and their binders ( fluoropolymers), by using dynamic mechanical analysis ( DMA) method.

用动态力学分析（DMA）方法，研究了四种TATB基PBX及其粘结剂（氟聚物）的测量频率与玻璃化温度的关系。

By means of outdoor exposure test, under glass test, artificial accelerated test, corrosion apperance and product analysis, the corrosion prevention data for a number of metal plating and the economical acid rain corrosion prevention metal plating technology were obtained.

通过金属覆盖层的自然曝露试验、玻璃框下曝露试验、人工加速试验、腐蚀形貌和腐蚀产物分析，考核了不同金属覆盖层的防蚀性能，筛选出了耐酸雨的经济有效防护体系。

Through DSC analysis, the etherified straw showed glass transition temperature, which indicated the straw has been partly modified into thermoplastic material.

通过差示扫描量热分析可以看出醚化稻草具有玻璃化转变温度，说明稻草部分被改性成热塑性材料。

Glass-reinforced thermosetting plastics ( grp) pipes and fittings-methods for regression analysis and their use

由玻璃纤维增强热塑塑料制成的管子和配件-回归分析法和应用

The analysis shows that when same thick glass sheet is produced in same forming conditions, the transverse shrinkage stress caused by surface tension and longitudinal dragging has little effects on shrinkage of glass ribbon behind the last pair of top rollers.

分析表明，生产同一厚度玻璃，在成形条件相同时，表面张力与玻璃纵向拉引产生的横向收缩对末对拉边机后玻璃带收缩率的影响不大。

Titrimetric Analysis of Dissoluble Carbonate in Water Glass

水玻璃中可溶性碳酸盐的滴定分析法

Deformation Analysis for Hermetic Window Glass of IR Solar Telescope

红外太阳望远镜封窗玻璃的变形分析

The structure and upconversion luminescence properties of oxy-fluoro-tungstosilicate glasses and oxy-fluoro-tungstosilicate glass ceramics were studied by absorption spectra, photoluminescence spectra, raman spectra, infrared spectra, differential thermal analysis, simultaneous thermal analysis and X-ray diffraction and so on.

并用吸收-透射光谱、发射光谱、拉曼光谱、红外光谱、差热分析、同步热分析、X射线衍射等手段研究了上述玻璃和微晶玻璃的结构和发光性能。

Thermal analysis and infrared absorption spectrum measurements were made to study the gel-to-glass conversion process. The sintering process is discussed following open-pore model.

应用热分折、红外吸收光谱研究了凝胶转化为玻璃的过程，应用开口气孔模型讨论了烧结过程。

Construction Technology of Intelligent Breathing-type Glass Curtain Wall in Beijing Shooting Range Hall Thermal characteristics and energy consumption analysis of external respiration double-skin facades

北京射击馆智能型呼吸式幕墙施工技术外呼吸玻璃幕墙热工特性和能耗分析

According to this analysis, it was predicted that the critical size of impurity which caused the spontaneous breakage in tempered glass was approximately 0.2 mm.

并由此分析了引起钢化玻璃自爆的杂质的临界尺寸约为0.2mm。

Analysis on Daylight and Thermal Performance of Glass Roof of Business Walking Street in Beijing

北京某商业步行街采光顶光热性能分析

Quantification of Differential Thermal Movement in Insulating Glass Edge Seals Using Finite Element Analysis

采用有限元分析法量化不同中空玻璃边缘密封的热位移

Energy-Saving Analysis of Thermal Insulation Coatings for Glass in Hot Summer and Warm Winter Regions

玻璃隔热涂料应用于夏热冬暖地区的节能分析

Thermal analysis results showed that there was no influence of POE and SiO2 on the glass transition temperature and melting point of PLA.

热分析研究结果发现，弹性体POE和无机纳米SiO2粒子对PLA的玻璃化转变温度和熔点的影响不大。

Analysis and comparison of the form of crystallization peak and the temperature difference(△ T) between crystallization temperature Tx and glass transition temperature Tg were made to determine the thermally stable glass composition zone in the glass-forming region.

以玻璃析晶峰的形状以及玻璃析晶温度Tx与玻璃转变Tg的差△T为参数，确定了具有较好析晶稳定性的组成区。