grain surface的例句大全

With the hydrothermal synthesis time extended, the crystal grain by the smooth surface of solid ball into the core-shell structure which surface is composed of nano-flakes, and finally into a perforated hollow spherical structure.

随着水热时间的延长，水热产物逐渐由表面光滑的实心球转化成表面由纳米纤维组成的核壳结构，最后转化为带孔中空球形结构。

the products or the mold core need optical mirror, cd pattern, wood grain, diamond pattern, drawing lines, diamond-shaped pattern surface;

对表面需求光学镜面、CD纹、木纹、钻石纹、拉丝纹、菱形纹之产品或模芯；

see a floor first arenaceous smooth surface is slick, have without grain bosomy protruding, cork grain is pure.

先看地板砂光表面是否光滑，有无鼓凸颗粒，软木颗粒是否纯净。

it can be fluorine carbon plate surface, polyester paint, imitation wood grain or electrostatic powder coating.

可对板面进行氟碳漆、聚酯漆、仿木纹或静电粉末喷涂。

the results show that: ( 1) the grain near the surface of the specimen was greatly refined after shot blasting treatment, and a large number of new sub-boundaries emerged inside or between the former grains;

研究结果表明：（1）纯镁和镁合金（ZM-5）试样表面进行喷丸处理，试样表层的晶粒得到了细化，在原有的晶粒内部出现了大量的新生亚晶界；

on the validity of boulton and newman's analytic model in the solution of specific yield of coarse-grained unconfined aquifer a new method of determining the specific yield of layered soils in shallow layer under surface

在粗粒无压含水层给水度的求解中解析方法适用性的探讨确定浅部层状土给水度的一种新方法

the steel plate surface has a cultured and clear wood grain ectype , and inhibit square space pattern , the beauty is generous

钢板表面具有典雅清晰的木纹浮雕，并压制方格图案，美观大方。

the temperature of the pyrolysis surface of solid grain decreases as the motor works, and so does the regression rate;

计算结果表明，固体燃料热解表面的温度以及退移速率随着发动机的工作逐渐降低；

model of electrochemical reaction charge transferring on surface of mineral grain and its flotation significance

颗粒表面电化学反应电荷传递模型及其浮选意义

the characteristics of the grain size distribution of the surface eolian sands along the coastal area of changle

长乐东部沿岸风沙沉积物的粒度分布特征

the result shows that with the increase of grain size, the extruded rod surface is gradually irregular, that is the heterogeneous flow of material is emerged;

所得结果表明，所成形的微型杆-法兰件挤出杆端随着材料晶粒尺寸的增大而逐渐呈现出凹凸不平的现象，即出现非均匀流动；

the fracture surface was rough and grain pull-out was clearly visible.

陶瓷材料断口表面凹凸不平，有明显的晶粒拔出现象。

chemical interaction and site competition among c, b, p and s in the grain boundary existed, and the fractured surface were observed by sem.

晶界上元素C、B、P、S之间，存在化学相互作用及位置竞争现象。用扫描电镜观察了断口形貌。

analysis of the sem fracture surface shows that amorphous matter at the grain boundary plays a dominant role in coarse-grained superplastic behaviors.

SEM断口分析表明，晶界上产生的粘性物质对粗晶超塑性行为有决定性影响。

the results show that the higher the shot strength, the smaller the mean grain sizes in surface and the thicker the deformation layers;

结果表明，TC4钛合金经高能喷丸处理后，材料表面形成一定厚度的细化晶粒组织，且喷丸强度越高，表层平均晶粒尺寸越细、形变层越深；

scanning thermal microscopy ( sthm) was used to analyze thermal properties of an ultrafine-grained titanium surface layer produced by ultrasonic shot peening.

通过喷丸处理方法在纯钛表面形成一定厚度的超细晶组织（纳米及亚微米组织），利用扫描热显微镜（SThM）对超细晶组织的热性能进行分析。

with the reducing of grain size, the oxygen cavity defect increases, the photovoltage effect on the surface enhances and the width of sps becomes wider.

随着晶粒尺寸的减小，材料表面氧空位缺陷浓度增加，表面光伏效应增强，谱带变宽。

Harvested wheat produced the greatest density of surface waste grain.

谷粒残物的密度在未翻耕的小麦地上最大.

Dynamic reliability of grain structure was analyzed by using response surface method and Monte-Carlo simulation method.

结合响应面法与数值模拟方法,分析了药柱的结构动态可靠度.

Experimental annealing proved that the strip thus annealed has a bright surface and is uniform in mechanical properties and grain sizes.

实验表明退火后的带材表面光亮度良好，机械性能和晶粒度均匀。