graphite crucible的例句大全

The utility model relates to a graphite crucible with a cover, which is mainly used for growth technology and primarily adopts a falling crucible method for growth of crystal.

带盖石墨坩埚，主要用于生长技术，主要是采用坩埚下降法生长晶体时。

Experiment is divided into two phases, First, at high temperatures using high-titanium slag and graphite crucible wall reaction produce the bonding layer of Ti ( C, N), and investigated the influence of reaction time on Ti ( C, N) formation.

实验分为两个阶段进行。首先在高温下采用高钛渣与石墨坩埚壁反应生成Ti（C，N）粘结层，并考察反应时间对Ti（C，N）生成量的影响。

The sample in tin leaf clad is put into a graphite crucible with a cap. Firstly, the sample is decomposed by heat at about 660 ℃, and the multiform oxygen in the sample is reserved in tin-lithium alloy by the Li2O form.

将锡箔包裹的试样投入带盖石墨坩埚中，第一步先在脉冲电弧炉中于660℃左右热分解，试样中各种形式的氧以Li2O形式保留在生成的锡锂合金中；

atomic absorptive graphite crucible method for measuring the stibium in drinking water

原子吸收石墨炉法测定饮用水中锑

graphite crucible salt-bath furnace by mid-frequency induction heating

中频加热石墨坩埚盐浴炉

Select water-cooled copper mold and graphite crucible as the reaction vessel, and set different welding current and duration of preparation.

氩弧熔化时分别选用水冷铜模和石墨坩埚做反应容器，设置不同的焊接电流和持续时间。

The paper explains the experiment of smelting silver based electric contact materials and silver based solder by medium-frequency induction furnace with graphite and clay crucible. It compares the effects of the two type crucibles on the compositions of the melted materials.

分别用石墨坩埚和粘土坩埚对银基电触头材料和银基钎料进行中频熔炼试验，比较两种坩埚对所熔炼材料成分的影响。

the sample is heated in are-fractory crucible instead of graphite or quartz crucible.

装载试样的坩埚由耐火材料制成，而不用石墨坩埚或石英坩埚。

It was found that the thermal shielding condition above the crucible lid, i.e. the hole shape and size in the graphite felt, plays an important role in determining the temperature uniformity on the crucible lid.

研究认为，坩埚盖上部石墨毡开孔形状和大小对坩埚盖的径向温度场有很大影响。

In addition, the solid liquid interface shape was controlled by changing geometric parameters, such as quartz crucible, graphite support thickness and cooling radius.

同时通过改变石英坩埚、石墨托厚度，冷源半径等几何参数来达到控制固液界面形状的目的。