grinding contact的例句大全

Experiment Research on Enhancing Heat Transfer of Grinding Contact Zone by Radial Jet Impinging

磨削弧区采用径向射流冲击强化换热的试验研究

Analysis of the grinding mechanism on pestle of meat mill in elastic contact

擂溃机杵头弹性接触下研磨机理的分析

It may decrease fatigue damage causing by rolling contact and side damage on track and prolong rail service life 0.5~ 1 time by means of grinding rail track.

通过对钢轨的修磨可减少由于滚动接触疲劳引起的钢轨损伤，减少钢轨侧面磨损，可延长钢轨的使用寿命0.5~1倍。

the asymmetric grinding of curved rail head can make the wheel-rail contact point move toward rail centre and apart from rail shoulder. accordingly, the contact stress between the wheel and rail decreases and the rail obligue crack can be eliminated and lightened.

钢轨曲线非对称打磨可以使接触点在轨面上向中心移动，避免接触点靠近轨肩位置，降低轮轨之间的接触应力，从而减轻斜裂纹的发生。

The system can perform the computations such as blank dimensions, cutting and grinding settings, tooth contact analysis and under cut check of SGM, SFM, SGT, SFT, HGM, HFM, HGT, HFT cutting methods.

该系统可完成SGM、SFM、SGT、SFT、HGM、HFM、HGT、HFT切齿法的齿坯几何参数、切齿调整参数、轮齿接触分析、磨齿调整参数和根切检验等计算。

Research on Technology of In process Monitoring of grinding Temperature at Contact Zone

磨削弧区温度在线监测技术研究

Based on the G-W contact model and Hertz theory, the contact status between polishing pad and wafer is analyzed at first. A mathematic model of material removal in polishing is obtained by means of the grinding action of single abrasive.

本文首先基于随机表面的G-W接触模型和赫兹弹性理论分析了抛光垫与晶片的接触情况，从单颗磨料的磨削作用出发，推导出抛光过程中材料去除率的数学模型。

The occurance of grinding burn is mainly caused by the high contact zone temperature.

磨削接触区温度过高是引起磨削烧伤的主要因素。

A new method is designed for in process monitoring of grinding temperature at contact zone in workshop with strong interference.

设计了一种可以在生产现场的强背景干扰下在线监测磨削弧区温度的新方法。

The value is determined by the grinding wheel speed and the fluid film thickness within the contact zone.

它由砂轮的转速及接触区域的液体薄膜的厚度决定。

Effect of Contact Force on Grinding PCD Tools

工作台调定压力对刃磨聚晶金刚石刀具的影响

the locking of the front nut is not tight enough, resulting in poor contact between the grinding blade and the discharge plate.

锁紧螺母的前面是不够严谨，导致放电板之间的联系贫困研磨刀片和。

the locking of the front nut is not tight enough, resulting in poor contact between the grinding blade and the discharge plate.

锁紧螺母的前面是不够严谨，导致放电板之间的联系贫困研磨刀片和。

the linear guide ways have no contact with grinding swarf which drops to the bottom of the machine for transfer to the sump.

研磨屑会掉落到机械的底部，然后转移到污水坑，因此与线性滑轨没有任何接触。

the relationship between workpiece ground surface colour and grinding temperature in contact zone has been established under strictly controlled experimental conditions.

本文在严格控制的实验条件下，建立了磨削弧区温度同试件表面烧伤色之间的对应关系；

by controlling the superposition between the rotary surface of the grinding wheel and the normal vector of the curve, point contact between them was realized. so grinding just like turning, the abrasive machining of complex curve is easy to be realized.

通过保证曲线轮廓上磨削点处的法线经过砂轮的回转平面，实现了砂轮与工件之间的恒定点接触，从而提高了加工精度、实现了对任意复杂曲线轮廓的磨削加工。

The value is determined the grinding wheel speed and the fluid film thickness the contact zone.

它由砂轮的转速及接触区域的液体薄膜的厚度决定.

Temperature response at contact zone during grinding of granite were measured using thermocouple detector.

采用热电偶夹丝法测量了平面磨削山西黑石材过程中接触弧区的温度.

Quick-point grinding is a new type of high and super-high speed grinding process with a point contact zone and lower grinding power, and the edge effect of the air barrier is weakened because of the thin super abrasives grinding wheel.

快速点磨削是一种新型高速/超高速磨削技术，接触区很小，实际磨削功率低，冷却及散热效果好。

Grinding coal sample result is better than the forming fine coal during contact angle measurement.

指出在接触角测量过程中,研磨煤样要比成型粉煤测量效果好.