heating的例句大全

In order to realize heating charging, newly designed residential building is often required to use household heating metering and inner room temperature control valve.

目前在新建住宅建筑中设置按户热量计量和分室控制温度装置；

Since initial adjustment of household heating meter system possess necessary control equipments& self-operated differential pressure controlling valve, temperature control valve and the pump of frequency conversion.

由于分户热计量系统初调节与以往的初调节相比，拥有必要的控制设备&自力式压差控制阀、温控阀、变频水泵。

In allusion to the problems in current household measurement heating-supply, the author puts forward a heating-supply charging method. It can improve water conservancy of traditional single downstream-flow heating system, make the best of current equipment of balanced valve and temperature control valve.

针对现行分户计量供暖存在的诸多问题，笔者提出另一种供暖收费办法：即改善传统单笔顺流采暖系统的水利状况，充分利用现有设备，如平衡阀、温控阀等；

Calculation of Heat Load and Drawing of Temperature Curve of the Heating System

供暖系统热负荷计算及供回水温度曲线的产生

A measuring device for melting and crystallization parameters of slag has been developed using single thermal couple which not only is as a measuring temperature element, but also as a heating element with the characteristics of higher speed of temperature going up and lowering and higher measuring efficiency.

研制了热丝法炉渣熔化和结晶参数测定仪，该测定仪用一根双铂铑热电偶丝既作加热元件又作测温元件，具有升、降温速度快，测量效率高的特点。

Development on superhigh temperature heating element

超高温发热体（STH）的研制

Results show that aligning heating device center and weld center, and heating main tube along stub tube root locally to520~ 580 ℃, can prevent the maximum temperature excursion.

结果表明：加热装置的中心与焊缝中心重合，主管沿接管座根部局部附加加热至520～580℃时，可较好地克服最高温度偏移。

Equivalent Network of Typical Apparatus Heating Components for Considering Distribution Effect of Metal Resistance Temperature Factor

考虑金属电阻温度系数分布效应的电器典型热件等效网络

The system adopts oven temperature feedback control system, the determination of time at carbonization end is judged by means of temperature of crude gas on standpipe, the optimizing control in coke oven heating is realized.

系统采用炉温反馈控制系统，根据上升管荒煤气温度的变化进行火落时间的判定，实现了焦炉加热过程的优化控制。

Melting and freezing problems involving multiple phase change moving boundaries of phase change materials ( PCM) in thermal storage systems under periodically heating cooling boundary condition of the third kind are modeled, and the transient temperature distributions and phase front time marching images in PCM are obtained.

对一类热储能系统中，相变材料在周期性加热冷却第三类边界条件下出现的多重相变运动边界问题进行了模拟，得出了系统内部瞬态温度分布及相变界面随时间推进的变化图象。

Energy Consumption Analysis of Heating System using a Low Temperature Geothermal Water Two Grade Utility with Water Source Heat Pump

采用水源热泵的低温地热水两级利用供暖能耗分析

Analysis of the Design for Heightening the Temperature Field Homogeneity of the Plate Surface of a Press Electric Heating Platen

提高压机电热板板面温度场均匀性的设计方案分析

The utility model is mainly composed of heating elements, circuits, a heat conductor, a temperature sensor, temperature control circuits, a temperature indicator, and a protective sleeve.

它主要由加热元件及电路、导热体、温度传感器及温控电路、温度指示器以及护套组成。

Center-temperature influence for heating the plate

板坯预热对中心层温度的影响

In some temperature interval, the weight loss rate increases when the heating rate increases.

在一定升温速率范围内，失重率随升温速率的增大而增大，反应的起始温度和终止温度也相应地向高温方向移动。

Pyrolysis processes of hemicellulose and cellulose were achieved under different temperature interval at lower heating rate that had different products yield characteristic.

在较低的加热速率下，生物质中的半纤维素和纤维素在不同温度区间内进行热解反应，具有不同的产物产出特征。

In the ohmic heating moment, the temperature of joint surface rises at first, and finally formed ellipse nugget within the workpiece.

在通电加热阶段工件贴合面部位的温度率先升高，最终在工件内部形成沿贴合面对称的椭圆形熔核。

We use the above thermal LBM model including viscous heating effects. And for the treatment of boundary conditions, we take the new scheme for the temperature jump boundary.

本文采用新的粘性热格子模型模拟粘性耗散热，在边界条件的处理上，提出了新的温度阶跃边界的处理格式。

The outer sides of the electric heating wires are additionally provided with heat-proof and heat-insulation cloth to prevent temperature loss.

电热丝的外侧增设有耐热保温布，以防止温度的损失。

The thermal decomposition of MF foam has only a large peak in nitrogen atmosphere and in air atmosphere. The peak temperature of weight loss increases with the increase of heating rate.

MF泡沫具有良好的热稳定性。MF泡沫在氮气气氛下和空气气氛下只有一个大的分解峰，失重峰温随着升温速率的提高而提高。