high sintering的例句大全

Diffuser disc is produced from aluminum oxide and ceramic bonded together with high sintering temperature.

性能特点:1.曝气盘采用氧化铝磨料和陶瓷结合剂高温烧结而成.

Cordierite-Mullite Board: It is made by high sintering cordierite and mullite together.

堇青石 — 莫来石棚板: 是以堇青石,莫来石两种材料混合成型,经高温烧结而成.

High sintering temperature and long maintaining time lead to the sufficient crystallization and the full densification, but result in the worsening of the deviation from the stoichiometry.

高的烧结温度和长的保温时间使结晶更加充分，样品致密度更好，但是也造成偏离化学计量比的加剧。

C/ C-SiC composite was prepared by hot pressed sintering with in-situ reaction between Si and C powder, which was prepared through high-energy ball milling and then was mixed into slurry infiltration of carbon cloth.

本文采用高能球磨，将Si、C混合粉体的浆料浸渗到碳纤维布中，利用热压烧结过程中Si、C的原位反应制备了C/C-SiC复合材料。

COMPREHENSIVE UTILIZATION OF TITANIFEROUS IRON ORE CONTAINING VANADIUM& FLUIDIZED REDUCTION High iron and low silica sintering techniques of titaniferous iron concentrate

钒钛铁矿综合利用&流态化还原法含钛铁精矿高铁低硅烧结技术

Laboratory experiment of hot air sintering for vanadium-bearing titanomagnetite concentrate with high titanium oxide content

高钛型钒钛磁铁精矿热风烧结实验室试验

High iron and low silica sintering techniques of titaniferous iron concentrate

含钛铁精矿高铁低硅烧结技术

High Density Sintering of the Diffusible Alloyed Powder

扩散型合金粉末的高密度烧结

Using powders prepared by high-gravity reactive precipitation ( HGRP), the characteristics of sintering kinetic curves of BaTiO_3 ceramics were studied in this work by means of a thermal dilatometer.

以超重力反应沉淀法（HGRP）制备的纳米钛酸钡粉体为原料，以热膨胀仪为测试手段，对钛酸钡陶瓷的烧结动力学曲线特征进行了研究。

Preparation of bulk Al_3Ti/ Al nanocomposite by high-energy ball milling and in-situ reaction sintering

高能球磨制备Al3Ti/Al块体纳米晶复合材料

The prepared porous material manufactured by elemental powder solid phase diffusion followed by high temperature reaction sintering process had excellent comprehensive performance.

采用元素粉末固相扩散+高温反应烧结工艺所制备的多孔材料具有优异的综合性能。

Densification behavior during reactive sintering of compacted Ti/ Al composite powders prepared by high energy ball milling

高能球磨Ti/Al复合粉体的反应烧结致密行为

Synthesis of YAG ∶ Ce~ ( 3+) Phosphor by High Energy Milling and Reactive Sintering

高能球磨与反应烧结合成YAG∶Ce~（3+）荧光粉的研究

The coating with high bond strength was synthesized by means of treatment of the gradient liquid phase sintering or medium temperature reactive sintering.

通过梯度液相烧结或中温反应烧结处理，热喷涂层具有很高的结合强度。

the average yield and ultimate strengths and elongation of sic_p/ 6066al increase by a factor of 82%, 65% and 300% respectively, compared with the sic_p/ 6066al fabricated by the same process just with short time stepped sintering at high temperature.

材料的平均屈服强度、抗拉强度、延伸率与工艺相同但采用高温短时烧结相比，分别提高了82%，65%和300%。

Development of SG Polishing Powder by High Temperature Sintering

高温烧结刚玉SG抛光微粉的研制

A preliminary study on the high temperture bright red glaze by microwave sintering

微波烧成高温大红釉的初步研究

The leaser sintering technology and its application in laser high-speed shaping

快速成型中激光烧结成型技术及应用

The results indicated: the porous metal material was shaping by balling and felt powder sintering under the local laser high energy.

试验结果表明：多孔金属材料是在激光局部高能量烧结下球化并粘接成形。

The effect of high silicon low iron material on softening temperature, balling index, quality and output of sintering ore was investigated.

分析了高硅低铁物料对铅锌矿软化温度、成球性指数、烧结矿质量与产量的影响。