hose connection的例句大全

loosen hose at vb, open tc #1 and bleed, retighten hose connection.

松开阀门B上的软管，开启测试旋塞1号并且排气，重新紧固软管连接。

Open TC # 1 and bleed by loosening hose connection at VB.

开启TC1号,然后通过松开连接在VB上的软管来排放空气.

Open TC # 4 and loosen hose at vent needle valve connection bleeding air from test kit.

开启测试旋 塞 4号,松开排气针形阀上的软管,从检测组件上排放空气.

Install high side hose between TC # 3 and tester connection A.

在TC3号和检测器连接端A之间安装高端软管.

Install low side hose between test cock No.4 and tester connection B.

在测试旋塞4号和检测器连接B之间安装低端软管.

Install high side hose between test cock No.3 and tester connection A.

在测试旋塞3号和检测器连接A之间安装高端软管.

Install low side hose between test cock No.3 and tester connection B.

在测试旋塞3号和检测器连接B之间安装低端软管.

the outlet hose must also be at least 100 mm lower than the appliance outlet (see drawing "drain connection" ).

将出口软管也必须至少超过100毫米的电器插座（请参阅图“流失连接”）为低。

Install high side hose between test cock No.2 and tester connection A.

在测试旋塞2号和检测器连接A之间安装高端软管.

the connection of the outlet hose to the siphon (2) must not be directly behind the appliance and should be accessible.

该出口软管连接虹吸管（2）不得直接背后的设备，并应访问。