hot deformation的例句大全

The test results showed that hot deformation promoted ferrite and bainite transformation, enlarged cooling speed range to form ferrite and inhibited feathery bainite transformation.

热变形促进了铁素体和贝氏体相变，扩大了形成铁素体的冷却速度范围，推迟了羽毛状贝氏体的形成。

Fractional softening evaluated from yield stress as well as relative peak stress and peak strain was measured against holding time after hot deformation.

调查了由两次加载拉伸变形时的屈服应力求得的静态软化率以及相对峰值应力比和峰值应变比随等温保持时间的变化。

The FR Series Protective Lubricant for Metallic Materials Hot Deformation

FR系列金属材料热变形防护润滑剂

That is: ( 1) to make the electroslag casting ring; ( 2) high temperature controlled hot deformation followed by controlled cooling ( i.e. high temperature thermomechanical treatment); ( 3) cold deformation strengthening.

它由如下三步组成：（1）电渣熔铸环坯→（2）高温控制热变形和控制冷却（即高温形变热处）→（3）冷变形强化。

The Soften Mechanism of A New Type Al-Cu-Li System Alloy During Hot Deformation

一种新型Al-Cu-Li系合金的高温变形软化机制

Hot Deformation Behaviour and its Processing Map of a New Austenitic Stainless Steel

高强度奥氏体不锈钢的热变形行为及其热加工图

relation between structure and wear resistance of low chromium wear resisting cast iron after hot deformation

热变形后低铬耐磨铸铁的组织与耐磨性的关系

mean reversion behavior of the rmb exchange rate metal dynamic recovery during hot deformation

人民币汇率均值回复性质的研究热变形中的动态回复过程

The effects of B and Mg on the hot deformation Of TiAl

微量B、Mg对TiAl金属间化合物热变形行为的影响

This paper deals with the granular carbides formation from hot deformation in high chromium cast steel.

本文探讨了热变形高铬铸钢中颗粒状碳化物的形成.

This paper deals with the granular carbides formation from hot deformation in high chromiumsteel.

研究了高速纸机中具有闷头的空心铸钢辊结构的塑性极限和参数设计问题.

Microstructure Predicting and Controlling of 10 Nb Steel after Hot Deformation

低碳铌钢热变形后的组织预测和控制

Effect of Hot Deformation on Dynamics of Thermal Fatigue Crack Propagation in Medium Chromium Semi-Steel

热变形对中铬半钢热疲劳裂纹扩展动力学的影响

Effect of Hot Deformation on the Ferrite Grain Size of Ti-Bearing Interstitial-Free Steel

高温变形对含Ti无间隙原子钢铁素体晶粒直径的影响

Study on Hot Deformation Behavior of Medium-Carbon Non-quenched and Tempered Steel for Crankshafts

一种曲轴用中碳非调质钢的热变形行为

And it describes test conditions of polarization treatment which are glueing force test, ageing test, hot deformation test and cold deformation test.

同时论述了极化处理试验情况：粘接力试验、时效试验、冷热变形试验。

Discussion about some questions of cold or hot plastic deformation in metal working technology

金属工艺学中关于冷热塑性变形若干问题的讨论

The flow stress behaviors of 2618 heat resistant aluminum alloy over the strain rate range of 0.01s-1 to ls-1 and the temperature range of 400 ℃ to 470 ℃ as well as the deformation degree from 20% to 60% have been studied using a Gleeble-1500 hot simulator.

用Gleeble-1500热模拟机，对高铁、镍含量的2618耐热铝合金的热压缩流变应力行为进行了研究。

So the radial temperature difference or the axial temperature difference caused by the cooling water is more than each of the difference by the hot oil, so the key point to prevent the deformation is that how to control the thermal stress during cooling operation.

根据冷焦水在塔壁上造成的径向温差和轴向温度梯度均明显地大于进油过程，确定了焦炭塔的防变形重点在如何控制冷焦阶段的热应力。

3D deformation pattern picture, the stress and strain of tube surface and regularities of distribution of spinning force during the process of three-roller synchronous hot backward spinning are investigated.

研究了三轮同步热反旋过程中的三维变形图，管坯表面应力、应变以及旋压力分布规律。