hot pressing的例句大全

The three dimension temperature distribution along mid-plane during hot pressing, the effect of moisture content and target density of mat on the distribution, the flow vapor pressure and the effect on the forming mechanism on density.

热压过程中板坯中平面温度场的分布。主要研究了不同条件下刨花板坯整个热压过程中中平面温度场的实时分布情况，水蒸气的流向以及成板密度形成机理的影响。

Tensile Creep of UD-C_f/ SiC Composites Prepared by Precursor Pyrolysis and Hot Pressing at Elevated Temperature

先驱体转化-热压单向C f/SiC复合材料的高温拉伸蠕变

Microstructures and thermoelectric properties of higher manganese silicide prepared by rapid solidification and hot pressing

快速凝固和热压高锰硅的微观结构和热电性能

Using finite element analysis software ANSYS to simulate different temperature rise rate in the hot pressing process, determined the best placement of the magnetic abrasive.

本文在考虑上述工艺参数的基础上，利用有限元分析软件ANSYS对热压烧结过程中不同升温度速率下的模具温度场进行模拟分析，确定了模具的最佳升温速率。

In this paper the present development of composite hot pressing process was described in four aspects of resin flow, thermal transmission, void action and residual stress mechanism.

本文主要从复合材料热压成型过程中的树脂流动和流变机理、热传递机理、气泡活动机理以及残余应力机理等方面论述了复合材料热压成型工艺的研究进展。

FeAl/ TiC composites were prepared by reactive hot pressing.

采用混合粉热压工艺制备了FcAl/TiC复合材料。

The manufacture of thin kerf diamond bit by sintering process with hot pressing and its application in China have experienced nearly twenty years.

用热压法制造薄壁金刚石钻头，在我国已有近20年的历史。

Research on the Fundamentals of Internal Temperature Distribution and Factors Involved of Flakeboard During Hot Pressing

刨花板热压过程温度变化规律及其影响因素的研究

Analysis on Hot pressing Technology Control in Production of MDF by Continuous Press

浅析连续平压法生产MDF热压工艺的控制

In this thesis, using the vacuum hot pressing diffusion welding ( Vacuum Hot Pressing Diffusion Welding), which is called VHP for short, can achieve the bonding of industrially pure titanium and pure copper.

本课题采用真空热压扩散焊接（Vacuum Hot Pressing Diffusion Welding），简称VHP来实现工业纯钛和工业纯铜的扩散连接。

The tribological characteristics of a nickel-base material containing sulfur made by hot pressing and sliding on the hard metal YJ2, is studied.

研究了通过热压法制备得到的含硫镍基合金与YJ2硬质合金对偶的摩擦磨损特征。

Theoretical Study of the Hot Pressing Time of Ply wood

胶合板热压胶合时间的理论研究

Study on LiMn 2O 4 synthesized by hot pressing method and on lithium getting off the products

LiMn2O4的热压合成及锂脱嵌研究

Effect of hot pressing parameters on microstructure and high temperature oxidation behavior of Laves phase NbCr_2 alloys

热压烧结对Laves相NbCr2合金组织及高温氧化行为的影响

Mechanical Property of Laves Phase TiCr_2 Synthesized by Mechanically Activating and Hot Pressing

机械活化热压合成Laves相TiCr2及其力学性能的研究

Application of carborundum and cast stone as well as hot pressing technology to mineral processing equipment some problems on hydraulic stowing mining method

绿碳化硅砂和铸石砂与热压工艺在选矿设备中的应用对水砂充填采煤方法几个问题的初步探讨

Elastic graphite die design about hot pressing thin wall diamond drill bit

薄壁金刚石钻头热压弹性石墨模具设计

The Application of New Technique of Stator Integrality, Cohering, Hot Pressing and Heat Expand Gap Setting to Hydrogenerator

水轮发电机定子整体化结构、铁芯热压粘结和热膨胀间隙新技术的应用

Technology of making magnetic ring of quartz clock with hot pressing casting method

热压铸法制造石英钟钟表磁环的工艺研究

Application of Vacuum Hot Pressing Method in Sintering Diamond Bit

真空热压烧结金刚石钻头的应用