ignition loss的例句大全

indication significance of "high-temperature loss on ignition" in loess accumulation sequence to palaeoclimate evolution

黄土堆积序列“高温烧失量”指标对古气候演化的指示意义

the paper introduced the background of this national standard about the determination of loss on ignition in iron ore by gravimetric method.

介绍了我国《铁矿石灼烧减量的测定重量法》国家标准的制定过程及相关背景。

in different ages, β can be expressed as the function of fineness, water requirement and loss on ignition of fly ash. experiment constants in the mathematics model of β are confirmed according to the tests.

建立了以粉煤灰细度、需水量比和烧失量三个因素为自变量的不同龄期β的数学模型，通过试验，确定了β数学模型中的各试验常数。

effects of quality index, which are volcanic ash activity, loss on ignition, fineness and water demand ratio, on quality of fly ash are expatiated, the requests to quality of fly ash are put forward.

阐述了火山灰活性、烧失量、细度和需水量比等品质指标对粉煤灰质量的影响，对粉煤灰品质提出了要求。

The curves of heating temperature vs the loss of ignition ( LOI) of some kinds of used resin bonded sand are shown by laboratory testing the LOI under given heating temperature and time.

通过在实验室条件下对树脂旧砂在一定加热温度、加热时间下燃烧减量的测试，建立了几种树脂旧砂加热温度和燃烧减量之间的关系曲线；

the factors affecting the reduction process in smelting magnesium include hydration activity of the calcined white, loss of weight on ignition, imbibition, burden, size reduction, density of pellet, reduction temperature, reduction duration, and vacuum level.

影响皮江法炼镁的还原工序的因素有煅白的水化活性度、灼减、吸湿，球的配比、炉料的粉碎粒度、制球后球团密度和还原温度、还原时间、真空度等。

fireclay and high-alumina refractories--determination of loss content on ignition--gravimetric method

粘土、高铝质耐火材料化学分析方法重量法测定灼烧减量

in this paper granite polishing tools manufactured inland and imported from abroad are analysed and compared in respect of hardness ( hr), filler loss on ignition, content of abrasive grits, compositions, density, etc.

通过对国内外新型花岗石抛光磨具的洛氏硬度（HR）、填料、烧失量、磨料含量、成分、密度分析对比；

Premixed combustion shows better Performance, including extended stable range 、 simple ignition 、 lower heat loss and more powerful Thrust output in catalytic experiments.

实验研究发现，铂催化环境下，微喷管内的预混燃烧表现出了良好的燃烧性能，包括较为宽阔的稳燃范围，良好的点火性能、较低的散热损失以及较高的推力输出等。

The contents were in compliance with USP27/ NF22, which included identification, loss on drying, residue on ignition, heavy metals, free acid and content of acetyl.

内容基本依照美国药典（USP27／NF22）CA项，包括鉴别、干燥失重、炽灼残渣、重金属、游离酸、乙酰化率。

loss on ignition ( loi) should not be more than 20%;

烧失量不宜大于20%；

the loss on ignition of sulfur in raw coal is related to contents of total sulfur, organic and inorganic sulfur.

原煤中硫的烧失率与煤中全硫、有机硫和无机硫的含量关系密切。

loss on ignition and fineness influence water requirement and activity of fly ash, and have effects on performance of fly ash concrete.

烧失量与细度影响粉煤灰的需水量和活性，进而影响粉煤灰混凝土性能；

high strength was obtained when colloidal alumina was used alone, and loss on ignition is as low as that of liquid alumina.

单独使用胶体氧化铝的陶瓷纤维纸，强度大，烧失量与单独使用液体氧化铝时的相近。

the results show that the high content of cao and loss on ignition is a character of chemical properties of desulfurized fly ash.

结果表明，脱硫灰的化学成分中除CaO含量高外，烧失量也较高；

limestone for chemical industry determination of content of loss on ignition gravimetric method model for sulphur absorption reaction of limestone for fbc

GB/T15057.10-1994化工用石灰石中灼烧失量的测定重量法用于流化床燃烧脱硫的石灰石固硫反应模型

fly ash having good quality should be that it has a little loss on ignition and content of so_3, its fineness and water demand ratio are low.

品质好的粉煤灰应该是：烧失量小，SO3含量少，细度和需水量比低。

the lower the loss on ignition, alkali content and so3 content of fly ash are, the better the crack resistance of the blended cement paste is.

从胶凝材料浆体抗裂性的试验结果来看，粉煤灰烧失量、碱含量、SO3含量越低，掺粉煤灰水泥浆体的抗裂性越好。

the model of regression analysis is established between the density and formula, the loss on ignition and formula and the intensity and formula, which provide a theory for formula optimization in the paper.

采用回归分析方法对非石棉垫片建立配方与密度、烧失量、强度之间的回归模型，为后续的非石棉垫片配方的优化奠定基础。

new correction method using fundamental parameter program has been also developed to compensate the errors from loss on ignition, gain on ignition, inaccuracy due to dilution or the evaporation of flux.

同时，使用基本参数程序建立了一种新的校正方法来校正由于烧失量、烧增量、稀释比或熔剂挥发而导致的分析误差。