initiator的例句大全

This article has described the preparation of the high solids reactive acrylic resin and discussed the influences of reaction conditions, initiator, solvent and molecular weight regulator on the MW of resin.

本文叙述了高固体分活性丙烯酸酯树脂的制备方法，讨论了反应条件、引发剂、溶剂和分子量调节剂对树脂分子量的影响。

In the introduction of the preparation process of the grafted chloroprene rubber adhesive, the effects of reaction temperature, reaction time, initiator concentration and grafting efficiency on the adhesion strength were investigated.

本文研究了接枝氯丁胶粘剂的制备工艺，反应温度，反应时间，引发剂用量，接枝效率对胶粘剂粘接力的影响。

In this paper, the features curing, curing reaction, curing mechanism and the cross linking reaction activity were reviewed including four kinds of curing reaction, initiator variety, initiator activity, selecting of initiator.

综述了不饱和聚酯树脂的固化特征、固化反应，固化机理和交联固化反应活性。

The effects of reaction temperature, mass of surfactant, mass of initiator and mass of PSG on the polymerization conversion were investigated.

考察了聚合温度、乳化剂用量、引发剂用量和PSG用量对细乳液聚合转化率的影响。

The initiator mainly influences the coagulum content and reaction rate.

引发剂主要影响反应速率和凝胶率；

Study on Graft Polymerization of Acrylamide onto Carbon Black with Manganic Pyrophosphate Complex as Initiator

焦磷酸络锰（Ⅲ）引发炭黑表面接枝聚合研究

Liang Qi-chao: Initiator and Practicer of the Comparative Approach in Historiography

梁启超：史学比较方法的倡导与实践

Enterprises are initiator and practicer;

企业是积极倡导者和实践者；

The mechanism of AIEE for the system was finely explained by single crystal structure of initiator I and the framework of polymer itself.

通过引发剂I的单晶结构以及聚合物本身的框架很好的解释了各自的AIEE机理。

Hexahydrobenzene is taken as the dispersion medium, the proportion of the oil/ water is 1.5, Span 80-Tween 80 is used as emulsifier and the potassium persulfate as the initiator, functional polymer MA-AM-AA-MMA was synthesized by reversion emulsion polymerization.

以环己烷为分散介质，油/水比例为1.5，Span80-Tween80为乳化剂，过硫酸钾为引发剂，用反相乳液合成了功能高分子马来酸酐-丙烯酰胺-丙烯酸-甲基丙烯酸甲酯。

The effects of the main factors such as polymerization temperature, the contents of initiator and emulgent on the performance of acrylic co-polymerization emulsion were investigated.

研究了引发剂用量、乳化剂用量以及聚合温度等因素对丙烯酸酯共聚乳液性能的影响。

With the increase of temperature and initiator concentration, the polymerization rate of VC-IBVE-HEMA increased.

KPS浓度和聚合温度增加使VC-IBVE-HEMA乳液共聚速率增加。

Sodium persulfate being initiator and sodium hydrosulfite being reducer, aqueous solution polymerization of maleic anhydride and acrylic acid was applied to synthesize the copolymer, which can be used as STPP substitute in laundry powder.

以马来酸酐和丙烯酸为单体，以过硫酸钠为引发剂，以亚硫酸氢钠为还原剂，采用水溶液聚合法，合成了用作洗衣粉代磷助剂的马来酸酐-丙烯酸共聚物。

Flash Photolysis Study on the Initiator of Water-Soluble Benzophenone Ammonium Quaternary Methyl Sulfonate Salt

水溶性甲磺酸二苯甲酮季铵盐光敏剂的闪光光介研究

The recent progress of metal-free initiator/ catalyst systems used for the ROP of cyclic ester monomers is reviewed, including H_2O, alcohol, amine, and carboxylic acid initiators, as well as proton acid, phosphine and N-heterocycle catalysts.

综述了近年来用于环酯单体开环聚合的无金属引发/催化体系，主要涉及水、醇、胺、羧酸等引发剂及质子酸、膦类、氮杂环类化合物等催化剂体系。

The Influence of Initiator on Preparation and Properties of SiO_2 Sol Modified Polyacrylate Emulsion

引发剂对SiO2溶胶改性聚丙烯酸酯乳液的合成及性能影响

The result shows that 3% initiator content can obtain high conversion rate, stable and excellent performance PUA latex.

结果表明，0.3%用量的引发剂取得了较高的转化率，制得了稳定性好、性能优异的PUA乳液。

The vinyl-terminated prepolymer polymerized with styrene ( ST) in the presence of free radical initiator to obtain a crosslinked block copolymer.

此预聚物再与苯乙烯（ST）通过自由基聚合，得到交联的嵌段共聚物。

The best reactional condition is: the amount of initiator, temperature and concentration of catalyst.

并通过正交实验研究了最佳反应条件，对聚环氧丙烷的分子量影响顺序为：引发剂用量，反应温度和催化剂浓度。

The Analysis and Characterization of Initiator B for High-pressure Polyethylene Production

高压聚乙烯生产中引发剂B的分析鉴定方法