injection pressure的例句大全

The relationship between injection pressure and surfactant foaming ability is discussed.

探讨了表面活性剂起泡性能和降压的关系.

Some oil wells have high steam injection pressure, low steam quality and poor stimulation effect.

冷家油田原油属特超稠油,储层埋藏深,物性差,部分油井热采注汽压力高, 干度低,影响了吞吐效果.

Application of the EUI with Ultra High Injection Pressure to a Single Cylinder Diesel Engine

超高喷射压力泵喷嘴在柴油机上的应用

The molder must recognize the dangers of excessive fill speed, insufficient injection pressure, excessive melt temperature, and inadequate packing.

注塑工必须认识过快填充速度、不足注塑压力、过高融化温度和不充分挤压的危害性。

lda measurement of droplet velocities in a high injection pressure diesel fuel spray

柴油机高压喷雾碰壁前后粒子速度的LDA试验研究

Effects of High Injection Pressure and Swirl Ratio on DI Diesel Engine Performance

高喷射压力与涡流强度对直喷式柴油机性能的影响

Injection pressure should be set low initially and increased to the point of filling the part just short of causing flash.

一开始应设定低的射出压力以填充零件至刚好不会造成毛边。

The injection pressure and gas flow uniformity of the injection tube in injection unit have significant effects on cleaning of filter-bag, which is one of the main technologies that need to be dealt with in large bag filter design process.

喷吹装置喷吹管喷吹气压和气量的均匀性对滤袋清灰效果影响显著，是大型袋式除尘器设计过程中需要解决的主要技术之一。

There is initial start pressure difference whatever for water flooding or water/ gas alternating displacement. So, increasing injection pressure should be done to start gas injection.

不论是水驱还是水气交替，都存在初始启动压差，要考虑增大注入压力以启动注气工程。

Influence of Mesh Density on Simulation High Pressure Injection Spray Characteristics

高压喷雾仿真中网格精度对喷雾特性的影响

Establishment of a Rat Chronic Elevated Intraocular Pressure Model by Episcleral Veins Ligation and Subconjunctival 5-Fu Injection

上巩膜静脉结扎联合应用5-Fu建立大鼠慢性高眼压模型

Some parameters affecting the supersonic flowfield, including the total pressure ratio of jet to freestream, slot width of injection, and the angle of injection were studied in more detail.

探讨了射流/主流总压比、射流宽度、以及射流与来流夹角对射流穿透深度、分离距离等影响，揭示了二次射流推力矢量控制干扰流场的控制机理。

Real water injection rate in water injection well will change when system pressure fluctuates or formation water absorption capacity changes. It is a disadvantage to needle vavle and downhole fixed water noddle.

注水井实际注水量随系统压力波动或地层吸水能力的变化而改变，这是针型阀或井下固定水嘴无法避免的缺陷。

It can create thermal interconnection between production well and injection well inject steam with high velocity and pressure which high than fracture pressure.

可以通过高于破裂压力的注汽压力高速注汽、有效地解决注、采井间形成热连通的问题。

Study and application of extremely high pressure water injection technology in Zhongyuan Oilfield

特高压注水技术在中原油田的研究与应用

By experimental confirmation, the automatic cell injection is scheme, which is based on cell pressure regulation, cell auto-transmission, micro-needle automatic positioning, and quantitative microinjection.

结果表明：基于细胞压力调节、自动输送、微针自动定位技术和定量微注射的自动化细胞注射是可行的。

The pressure injection peg at peg end is injection serosity around pile toe and pile tip to consolidate soil around pile toe and pile tip, and form a enlarge head which carrying capacity was higher than original soil layer, so that can improve carrying capacity of pile.

桩端压力注浆桩主要是通过向桩底及桩端周围注入浆液，加固桩底及桩端周围的土体，形成一个具有高于原土层承载力的扩大头，从而提高桩的承载力。

conclusion according to the severity of high pressure injection injuries, the patients were treated with different methods.

结论高压注射伤的治疗应根据损伤的具体严重程度给予不同方法的治疗。

the experiment study of this dissertation revealed the coupling phenomenon of high and low pressure parts' pressure, temperature and injection quantity as well as abnormal injection caused by the intensive coupling phenomenon.

实验揭示了高低压系统压力、温度和循环喷油量各种特性耦合现象以及强耦合引起的不正常喷射现象。

The development of the complex measurer for the measurement of the fuel supply pressure of VE type fuel injection pump and the piston track of timing advance device

VE型喷油泵输油压力和提前器活塞行程综合测量仪的研制