intake chamber的例句大全

this paper introduces a new type of a gate which is very practical in project. it solves the hydrostatic lift problem of a gate between an intake chamber and suction chamber in the catchment basin of an intake pump station.

介绍的是工程上实用性较强的一种新型闸门，它主要解决了水泵站集水井内进水间与吸水间之间的闸门静水起吊问题。

the intake chamber after lets in air the pipe connection to pass taking advantage of the steel trachea to lets in air the filter;

进气室经进气管接头借钢质气管通向进气滤清器；

Mixing it with cold water produces large amount of anions that react with the intake and exhaust valve of the petrol tank and explosion chamber through the cooling pipe in the engine.

与冷却水混合使用后带有大量负离子可由引擎的冷却水管直接与汽缸及燃烧室、吸排气的气门产生作用。

Effect on Direct-injection Unit Pump Diesel's Preferment and Emission by Matching Intake Vortex, oil and combustion chamber

进气涡流、油束以及燃烧室的匹配对直喷式单体泵柴油机性能和排放的影响

The swirl of intake air generated by skew intake holes enhances fuel-air mixing, minimizes dead zone and stabilizes the flame with reverse flow, but the excessive reverse flow can cause overheat in combustion chamber and exhaust;

斜孔所产生的旋转进气，虽具有强化燃气混合、消除死区和回流稳焰的作用，但回流过度会使燃烧室及排温过高；

As the air inlet diameters increase, the intake central swirl is intensified and thus fuel evaporation in the first combustion chamber is improved.

加大进气孔直径使进气中心涡流增强，燃油在一级燃烧室中蒸发量增加。

the piston moves up and down in the piston chamber primarily in response to changes in intake manifold vacuum.

活塞主要因进气歧管真空度的变化而在活塞腔内上下移动。2.In the round piston VV carburetor , the piston is moved by intake- manifold vacuum .在圆形活塞的VV化油器中，活塞是由进气歧管真空移动的。

mathematical model of influence of surge chamber on water level fluctuation of intake area for the high lift lock

调节水池对高水头船闸取水区域波动影响的数学模型

The ballute is internally provided with a soft intake pipe which is connected with the compressed air chamber in the truck.

气伞内置软状进气管，与车内压缩空气室连接。

The key technical problems of flood discharge tunnel with spiral flow shaft include: ( 1) negative pressure being prone to occur at the joint of vortex chamber intake and shaft;

旋流竖井泄洪洞的关键问题是：（1）涡室进口与竖井连接段跌坎处易产生负压；