interrupt system的例句大全

Design and Implementation of Line Card Interrupt System in the Core Router

核心路由器线卡中断系统设计与实现

initialize any ram variables required by the interrupt system.

初始化任何RAM的中断系统所需的变量。

at the same time, some problems like conflict and obstruction are resolved in a double interrupt system and the costs reduced.

同时，在软件结构上采用了双中断技术，克服了相互冲突和干扰等难题，降低了控制系统的硬件成本。

Based on the successfully ported ARM Linux kernel, optimize its interrupt system, reduce its interrupt delay.

分析了在成功移植Arm Linux内核基础上，优化Arm Linux的中断系统，降低系统的中断延时。

you must also set the corresponding bits in the peripheral control registers to configure the interrupt system and enable the interrupts.

你必须自己设置相应的外围控制寄存器的位来配置中断和使能中断。

study on the lawsuit limitation interrupt system

我国民法诉讼时效中断制度探析

The system software involves five main modules: initialization module, phase-changing module, current-regulating module, speed-regulating module and timer interrupt module.

软件分为五块：主程序中的初始化模块、换相子程序模块、电流调节、速度调节子程序模块，定时器中断程序模块。

The application of multi-interrupt brings much convenience to design program and makes the processing time of program meet the requirement of the fast excitation control system of generator's responding to signal.

多个中断的嵌套调用，为程序的设计带来了极大方便，使各种服务程序的执行时间满足快速发电机励磁控制系统对信号响应时间的要求。

Application of Interrupt Technique in Data Acquisition System for Traveling Wave Fault Location of Transmission Lines

中断技术在输电线路行波故障定位数据采集系统中的应用

Control system software of upper PC was compiled with VB6.0, system program of the intelligent traffic signal machine was compiled with assemble language, timing interrupt service routine was partitioned into 100ms, 0.5s and 1s program segment.

上位机控制系统软件用VB6.0编程，信号机系统程序用汇编语言编写，其定时中断处理程序分为100ms，0.5s和1s程序段。

Being different from the existing measurement method for A/ V delay, the system does not produce random noise to interfere audio test, and does not need video test signal to interrupt live program.

与现有测定A/V延时的方法不同，它不存在干扰音频测试的随机噪声，也不需要中断实际节目的视频测试信号。

Design and Optimize the Interrupt Service Routine of ARM7 Embedded System

ARM7嵌入式系统的中断设计与中断处理优化

The module software is a front and back office system. Namely the front system completes interrupt service routine while the background system completes the task-level program.

模块软件采用前后台系统，即前台完成中断服务程序，后台完成任务级程序。

Modular construction is adopted in the software system design. It is chiefly composed of main program, interrupt service routine, and several functioning modular subprogram.

软件系统的设计采用模块化结构，主要由主程序、中断服务程序和若干功能模块子程序组成。

Secondly, we proceed with analysis on scheduling and interrupt handling of operating system. Modifying specific parameters solves the problem pertaining to timer interrupt that has great effect on throughput and stability.

其次从分析操作系统的任务调度和中断机制入手，通过修改特定的参数解决了影响系统数据吞吐率和稳定性的时钟中断问题。

The flow chart of main program and interrupt subprogram of the time service device and the electronic clocks were presented in the system.

论文的软件编写采用C51，给出了授时器、电子时钟的主程序和中断子程序框图。

It is specific designed for the application of embedded system, it include the BSP ( Board Support Package) and operating kernel and user selected component and ISR ( interrupt service routine).

它由板级支持包（BSP）、操作系统内核及用户选用组件、中断服务程序（ISR）绢成。

According to the hardware scheme of control system, the software realization scheme is given, which includes: the design flow chart of harmonic separating algorithm, the main program and its interrupt service routine.

根据控制系统的硬件设计，确定了软件实现方案，给出了主程序及其中断服务程序、谐波分离算法程序的设计流程图。

The interrupt cycle of the general I/ O card is at ns level, and the system realizes the control of the galvanometric scanner through interrupt response.

中断I/O卡的中断周期在ns级，通过系统实时响应中断请求来实现对振镜式激光扫描系统的实时控制。

second, the system structure, interrupt request level, thread scheduler, asynchronous procedure call and local process call of windows 2000 are analyzed, and some methods are produced.

其次，对Windows2000系统结构，中断机制，线程调度机制，及其异步过程调用和LPC机制进行了分析，从而得到在Windows2000中完成实时性任务可用的一些方法。