isothermal flow的例句大全

The isothermal flow field in a cyclone combustion chamber is being modeled by a 3-dimensional axis-symmetric RNG k-ε turbulent flow model. A particle image velocimeter ( PIV) was use for measuring the velocity vector distribution in various cross-sections of a cyclone combustion chamber.

采用三维轴对称RNG kε湍流模型模拟了微型燃气轮机旋流燃烧室内的等温流场，用粒子测速仪（PIV）测量了旋流燃烧室内不同截面位置的速度矢量分布。

The catalytic test of methanol synthesis for straw syngas was carried out in a tubular-flow integral and isothermal reactor.

以直流流动等温积分反应器为实验装置，对秸秆气催化合成燃料甲醇技术进行实验研究。

The hydrothermal decomposition of thiodiglycol in supercritical water was examined in this paper. Experiments were performed in an isothermal, plug-flow reactor at temperatures from 425 to 525 ℃, pressures from 22 to 30 MPa, and reactor residence time from 0.6 to 63.2 s.

在等温管式平推流反应器中研究了超临界水中硫代双乙醇（TDG）的水热分解反应，反应温度为425～525℃，压力为22～30MPa，反应停留时间为0.6～63.2s。

Finally, computer simulation was carried out on the 3D non-isothermal viscous fluid and 3D isothermal viscoelastic fluid flow in a cast film process.

最后，对3D非等温粘性流体、3D等温粘弹性流体的薄膜流涎过程进行了模拟研究。

Numerical Simulation of Three-dimensional Isothermal RTM Process Based on Solid Flow

基于实体流的三维等温RTM数值模拟

laminar dissipative flow in a porous channel bounded by isothermal parallel plates

恒温平行板间多孔介质通道中的分层耗散流动

This paper studies, a new method for measuring flow rate characteristics of pneumatic solenoid valves, namely measuring sonic conductance C and critical pressure ratio b of pneumatic solenoid valves using discharge pressure curve of isothermal chambers.

对一种新的测试气动元件流量特性的方法进行了研究，即利用等温容器的放气曲线来测量气动电磁阀的音速流导C和临界压力比b。

numerical simulation of three dimensional isothermal power-law polymer melt flow within a rectangular convergent channel

矩形收敛流道内聚合物熔体三维等温幂律流动的数值模拟

Numerical simulation of mixed convection heat transfer in an enclosure with vertical isothermal plate heat transfer of natural convective flow between air and inclined plate with heated surface upward

方腔内竖直板混合对流换热的数值模拟倾斜平板热面朝上自然对流换热实验研究

Simulation of Dendritic Growth Shape of Isothermal Polycrystalline Binary Alloys in a Forced Flow

数值模拟流动下等温多晶粒枝晶生长形貌研究

The flow stress features of 2519 aluminum alloy during plastic deformation at elevated temperature were studied by the isothermal compression test using Gleeble-1500 hot simulator.

采用Gleeble-1500热模拟机进行高温等温压缩试验，研究了2519铝合金在高温塑性变形时的流变应力特征。

The modelling results suggest that biaxial extension dominates the isothermal squeeze flow process, with apparently negligible shear flow effects.

研究结果表明：GMT挤压流动过程中拉伸流动为主导流动，剪切应力的影响较小，可以应用拉伸流动模型来预测压力的大小。