joint angle的例句大全

Quality control and test of T-joint and angle welded joint in construction steel structure

建筑钢结构T型及角接焊接接头的质量控制与检测

The machine is mainly used for extrusion and connection of 45 ° seam casement window with angle joint structure.

门窗单头组角机主要用于角码结构的平开门窗45°接缝的挤压联结。

Joint Roughness Coefficient ( JRC) is an equivalent index which describes mechanical effect of rock joint surface angle of ascent.

JRC是反映爬坡角力学效应的岩体结构面表面形态等效描述指标。

Design of the Injection Mould for Right Angle Water Supply Pipe Joint with Plastic Lining Internal Thread

内螺纹衬塑直角管接头注射模设计

implementing the butt-joint of the magnetic rod and the measuring rod according to the angle obtained and the distance between shafts.

根据所述获取的夹角和所述轴间距，实现所述磁力杆和所述测量杆的对接。

In addition, the technological test for all position welding both low carbon steel and stainless steel pipes was carried out, and both the included angle of the joint and the welding parameters for better appearance of weld were optimally chosen as well.

并对低碳钢和不锈钢两种管材的全位置焊接进行了工艺试验研究，优选出了焊缝成形较好的接头坡口角度及焊接规范参数。

In this paper, the accurate expression about the supplementary angle of gravity terrain correction at the joint of the circle and square domain was derived and presented.

本文给出了重力测量中地形改正的补角（园域和方域接口处）地改值的精确表达式。

In the end, we get the real time variation situation of joint moment and the simulation curve between joint moment and joint turning angle.

得到了实时的关节力矩变化情况，各关节力矩与关节转动角度变化值之间的仿真曲线。

The results show that Q-angle is a spatial angle, which is increased with the knee joint flexion.

研究结果表明，Q角是一空间夹角，随屈膝角的增大而增大。

There must be one or more universal joints to permit variations in the angle of drive. There must also be a slip joint that permits the effective length of the propeller shaft to change.

可轴向移动的球笼式万向节一个或几个万向节来适应传动角度的变化；一套伸缩花键，能够改变传动轴的现有长度。

The results also show that the dip angle of the joint determines the slope safety factor and the potential slip range. The steeper joint sets affect less the slope stability.

节理倾角与边坡安全系数、潜在滑动范围密切相关，陡倾角节理对边坡稳定性影响较小。

This paper analysed the kinematic properties of ball joint hinged on the piston rod and steering drag link of a separated assistant steering mechanism, and the equations of the path and mathematical model of pressure angle were established.

分析了分置式转向助力机构的液压缸活塞杆与转向直拉杆相铰接的球头销的运动特性，建立了其轨迹方程及压力角的数学模型。

The long frame bar and the short frame bar adopt the mutual complementary angle slope butt-joint.

所述的长框架条与短框架条采用互为余角的斜面对接。

Angle changes of shoulder joint. knee joint.

肩关节、膝关节和髋关节的角度变化。

The dynamic equation of arm rotating joint was established based on Lagrange equation. The relationship between torque and rotation angle of the arm rotation joint were obtained.

应用拉格朗日方程建立起摆臂旋转关节的动力学方程，得出摆臂旋转关节处的转矩与摆臂转角之间的关系。

The relation between the stability of rock bedded slope and the dip angle of strata or the shear strength of joint is also explained.

同时也阐明了岩层倾角以及结构面抗剪强度对顺层岩质边坡稳定性的影响。

An approach to magnetic particle detection technology used for angle weld joint on small size tube socket based on yoke magnetization method

小尺寸管座角焊缝磁轭法磁粉检测工艺探讨

These angles would be increase with the age growing up especially femoral shaft double condyle angle and joint gap angle.

这些角度随年龄增加而增大，以股骨干双髁角及关节间隙角增大明显。

Fractal dimension can be used to quantitatively describe jointroughbness and to and to estimate strength and friction angle of joint.

可以说，分维能定量地刻画节理的粗糙性，并有可能用来预测节理抗剪强度和节理摩擦角。

The most important link in the position control of robots is the control of angle of joint A. Therefor, utilizing fuzzy theory to study this kind problems is carried out.

关节角A的控制是机器人位置控制技术中至关重要的环节，为此研究了利用模糊原理对关节角速度控制的一类问题。