joint welding的例句大全

Development of Automatic Arc Welding Machine for Saddle Joint Seam on Large-diameter Cylinders

大直径筒体马鞍形曲线自动焊接机的研制

A new method for direct measuring interface temperature and its distribution along diameter direction for friction welding joint between the same or different materials is put forward by using the standard thermal couple in combination with natural thermal couple.

将标准热电偶与自然热电偶两种测温方法结合起来，提出了一种能直接测量同种及异种材料摩擦界面温度及其沿径向分布的新方法。

Different process parameters of rotating arc welding affect the welding joint microstructure, which directly related to the thermal cycling curve of rotating arc welding.

旋转电弧的不同焊接工艺参数对焊接接头的微观组织有影响，这与旋转电弧焊接时的热循环曲线有直接的关系。

Based on the theory of thermal conductivity in weld zone and selection appropriate for weld type, a correct weld joint between cylindrical shell and its bottom head is designed. It is the efficient joint to prevent the oil cylinder from welding distortion.

根据焊接热传导的理论，选择适当的配合类别，设计出合理的缸体与缸底的焊接接头，可有效地防止缸体的焊接变形。

Finite element analysis of anti-break performance and anti-shock strength of the armored steel thermit welding joint

装甲钢板铝热焊接头抗断性和抗击强度有限元分析

Thermit welding of crane rail joint

铝热焊法焊接起重机钢轨接头

The test results show that the tensile strength and the impact toughness at low temperature of the welding joint are both slightly lower than that of the base metal.

实验结果表明，焊接接头的抗拉强度和低温冲击韧性都略低于母材值。

The research shows that heated plate temperature and welding pressure has a great significant effect on the joint performance, heating time has a significant effect on it, but press welding time is not significant.

研究表明，加热板温度和焊接压力对焊接接头性能的作用特别显著，加热时间对焊接接头性能的作用显著；而压焊时间对焊接接头性能的作用不显著。

The Discussion of the Influence upon Security by the Space between Welding Joint on the Board of Boiler

小议锅壳锅炉焊接管板孔桥相邻焊缝间距对使用安全性能的影响

Trajectory planning method in joint space based on welding robot

基于焊接机器人的关节空间轨迹规划方法

Vision system of butt joint gap width measurement for laser welding

激光焊接对接接头间隙宽度视觉测量系统

analysis of the property and default of the l4 industrial purified aluminum joint by the capacitor discharge butt welding process

L4工业纯铝的电容储能对焊接头性能及缺陷分析

Microstructure and Properties of Loop Projection Welding Joint Between Large-Diameter Screw Nut and Electrogalvanizing Thin Steel Plate

有闭环（插槽）可以套在螺母或螺栓头上的扳手。厚大螺母与镀锌薄钢板环凸焊接头组织与性能

Study on the Application of Plasma Arc Powder Repair Welding in Restoring Petroleum Drill Stem Joint

等离子弧粉末堆焊在石油钻杆接头修复中的应用研究

The cause of formation and protection of gas cavity in welding joint for aluminium magnesium alloy silo

铝镁合金料仓焊缝气孔的成因与防治

Analysis of solder joint position, check multilayer welding.

分析焊点位置，检查多层板焊接。

Based on the principle and process of laser transmission welding, the lap joint form was taken and the key technology and difficulty of welding were also considered.

基于激光透射焊接的原理和过程，采取搭接接头形式进行焊接，同时焊接关键技术和难点也被考虑。

Study on laser tailored welding technology and joint of zinc-coated steel plate

镀锌板的激光剪裁拼焊工艺及接头性能研究

Study on Laser Welding for Lap Joint of Stainless Steel' Case

不锈钢机匣组件激光叠接焊工艺研究

The results shown that a deformation-free joint with good weld surface appearance can be obtained with suitable welding conditions for butt-joint and lap-joint of the dissimilar materials.

结果表明，当焊接工艺参数合适时，可以获得表面成形良好、无变形的铝合金与钢的对接接头和搭接接头。