lap joint的例句大全

This paper is to discuss the interlaminar stresses of adhesive lap joint by the energy method without considering the adhesive layer.

本文以能量法求解无胶层厚度的搭接接头的层间应力。

To join ( pieces, as of wood) by means of a scarf or lap joint.

使搭接用凿槽或搭接的方法连结（小块，例如木头的）

We can obtain the good appearance and defect-free brass and aluminum alloy lap joint when selecting the appropriate parameters.

焊接时选取合适的工艺参数，可以获得外观形貌良好且无缺陷的异种材料焊接接头。

By comparing the results of buckling analysis, the effects of material nonlinearity, geometric imperfection and lap joint on stability were studied.

分析了材料非线性、几何缺陷和筒壁搭接对稳定性能的影响。

Interfacial Stresses of an Adhensive Lap Joint

胶合搭接连接的界面应力

Using boundary element method, the interfacial streeses of adhensive lap joint with either perfect or imperfect interface are studied.

采用边界元法计算分析了具有理想界面和非理想界面的双板条胶合搭接连接的界面应力。

Based on the principle and process of laser transmission welding, the lap joint form was taken and the key technology and difficulty of welding were also considered.

基于激光透射焊接的原理和过程，采取搭接接头形式进行焊接，同时焊接关键技术和难点也被考虑。

The BEM technique for adhesive-bonded structure proves valid by comparing the stress distribution for double lap joint calculated in this paper with that calculated by finite element method.

对双搭接接头进行了边界元应力分析，并和有限元结果进行了对比，从而证实本文方法的有效性。

Analysis of Adhesive Lap Joint Evaluation includes appearance of weld, effect of flux on penetration, microstructure of weld, chemical compositions of weld and base material and mechanical properties.

内容包括焊缝外观形貌、熔深效果、接头微观组织、化学成分及接头力学性能分析。

The structure of intersecting Lap joint Between steel pipe has been widely applied in engineering project, such as Oil and gas pipelines, Pressure vessel and Various forms of pipe truss structure.

工程中钢管与钢管的相贯搭接广泛的应用于油气管道、压力容器以及各种形式的管桁架钢结构中。

The orthogonal test of numerical modeling on the peck stress distributed in single lap joint

单搭接接头峰值应力数值模拟的正交法分析

joggled lap joint; flush lap joint

搭接对接接头

standard specification for lap joint flange pipe end applications.

搭接凸缘管端应用规范。

specification for lap joint flange pipe end applications

搭接法兰管端规范

Methods Two tongue-shaped flaps raised just beside the cleft of the earlobe were revolved and lap-jointed to repair the hypoplastic earlobe cleft.

方法将耳垂裂隙局部形成的双舌形皮瓣旋转、瓦合，治疗先天缺损型耳垂裂。

The most commonly used joint configurations are the lap , scarf, and butt joints.

最常用的连接结构是搭接, 嵌接和平接.

Stress Analysis of Storage Tank with its Annular Plates and Center Plates Lap-jointed

油罐中幅板和边缘板搭接的应力分析

The stress and strain distributions in the gluing joint are considerably influenced by some factors such as the geometry of the adherend, the lap length and the adhesive thickness etc.

胶接接头中应力应变分布的具体情况取决于被粘物的几何尺寸、搭接长度以及胶层厚度等因素。

The results shown that a deformation-free joint with good weld surface appearance can be obtained with suitable welding conditions for butt-joint and lap-joint of the dissimilar materials.

结果表明，当焊接工艺参数合适时，可以获得表面成形良好、无变形的铝合金与钢的对接接头和搭接接头。