laser processing的例句大全

The wavelength compensation of laser interferometer while measuring at production field is introduced. By analyzing the measuring data processing formula of laser interferometer, the theory to use end correction method to automatic real-time compensate the offset of the wavelength is presented.

介绍了激光干涉仪在现场测量中激光波长的补偿，通过分析激光干涉仪测量数据处理公式，提出了波长补偿值用终端修正的方式进行自动实时补偿的理论。

Laser carving technology has the advantages of higher resolution, focusing precision and digital modulation. Direct laser micro-structure technology has replaced the traditional intaglio plate technology. It has been widely used in laser engraving gravure plate and laser plate processing.

激光在这一领域的应用有如下特点：加工效率高、聚焦精确和具备数字调制的优势，因此直接激光微构造技术已经取代了传统凹版制版技术。

Laser can print various characters, symbols and patterns on the plat surface or cambered surface, so high-speed laser marking can realize the real-time marking on the product assembly line, with the advantage of highly marking accuracy, fast processing speed, and so on.

激光可以在平面或者弧面上打印各种文字、符号和图案，高速打标可在生产线上实现实时打标，具有打标精度高、加工速度快等优点。

An Imaging Processing Method for Measuring the Array Position of Diffraction Spot of High Power Laser Beam

测量高功率激光束衍射光斑阵列位置的图象处理方法

Laser rapid forming ( LRF), a new solidification processing technology, has many advantages which would make it competitive for the processing of TC21 alloy.

激光快速成形作为一种材料凝固成形新技术，诸多优点使其成为一种具有竞争力的TC21钛合金成形方法。

Switzerland has laser cutting machine, LVD-HD 4-meter shears, press brakes and other sheet metal processing equipment.

公司拥有瑞士激光切割机 、 LVD-HD4米剪板机 、 折弯机及其它钣金加工设备.

By use of MOS image sensor developed by ChongqingUniversity and microcomputer data processing, a feasible method for laser accurate micrometry is presented in this paper.

本文提出采用重庆大学研制MOS图象传感器，用微机进行数据处理，实现激光精密测微的一种可行方法。

The results show that, after laser surface processing, a melt layer with cellular dendrite structure is formed, which could transform into very fine grained structure during the annealing treatment.

结果表明，激光处理后试样表面熔凝区的组织主要为胞状枝晶组织，经后续热处理可转变为细小的等轴晶粒组织，并形成了良好的超塑连接条件。

If simple signal processing technology was used, LGW which use fake-random laser code can be jammed effective when three indicator laser pulses were received.

针对伪随机码的特点，增加了简单的信号处理过程，只需接收三个激光制导信号，就可以对其实施有效干扰。

Residual stress analysis has been investigated for Ni-base thermal sprayed coatings with laser melting and consolidation ( LMC) processing by means of X-ray diffraction ( XRC) method.

本文用X射线衍射法研究了45号钢基体上镍基热喷涂层经激光熔凝处理后的残余应力。

The research of the large-power pulse laser AFW wide-area control system based on the blade precision processing

基于叶片精细加工的大功率脉冲激光幅频宽广域调控系统的研究

infocus industrial system limited is a manufacturer of industrial laser marking and processing systems.

合益工业系统是工业激光标印及加工系统的制造商.

peter lehmann laser-materialbearbeitung gmbh offers you more offers on material processing , metal processing by laser.

提供关于材料加工以及工件加工的信息.

After simulation of MATLAB proof method is feasible, and carries on test to digitized pulse laser signal processing system, receives the good results.

经MATLAB仿真证明方法可行，并对数字化脉冲激光信号处理系统进行实验测试，收到良好效果。

Processing Fundamentals of Laser Textured Yarn Machine

十锭位激光变形纱机加工原理

With optimal design and processing. a 10-bit precision is achieved without laser trimming and good temperature tracking property is obtained in full temperature range (-55~ 125 ℃).

在设计和制作上进行优化，不用激光修调能够达到10位精度，在全温范围内有较高的温度跟踪特性。

Effect of Subsequently Sintered Processing on Properties of Thick-Film Resistor Directly Fabricated by Laser Micro-Cladding

后续烧结工艺对激光微细熔覆制备厚膜电阻性能的影响

Technics of LTCC MLB processing using thin film circuit technology, ink-jet printing, laser drilling, and conventional manufacturing methods is introduced.

概述了综合运用薄膜线路技术、喷墨打印技术和激光钻孔技术以及采用常规技术制作LTCC基板的简要工艺。

A three beam laser scattering system for simultaneously measuring the size distribution and velocity of particle is proposed in the paper. The constitution, measuring principle, signal sampling and data processing of the system are described.

提出了同时测量粒子尺寸和速度的三光束激光散射系统，叙述了系统的组成、测量原理、以及信号采集和数据处理。

At last, the error model of the three dimensional laser scanner was established. ( 2) The point cloud data which obtained by the three-dimensional laser scanner includes massive mixed spots and the noise will bring a lot of trouble for our later processing and application.

由三维激光扫描仪测量得到的点云数据含有大量的杂点和噪声，为其后续处理与应用带来了很大的麻烦。