laser weld的例句大全

Two groups of matching relation of the weld speed and the wire feed rate were found in a condition of invariable laser power and focus position.

前者试验获得了一定激光功率和离焦量条件下两组焊接速度和送丝速度的匹配关系，并发现填充焊丝的加入对焊缝咬边现象确有改善；

The thermal deformation in penetration welding with a laser has been investigated as a factor which results in the elevation on the surface of the weld.

研究了热变形对激光深熔焊焊缝表面形状的影响。

methods: cytotoxicity, acute toxicity and mucous membrane irritation were performed on the laser-welded dissimilar alloy in dentistry: co-cr and ni-cr alloy based on gb/ t 16886 standard.

方法：参照GB/T16886技术报告相关标准，对激光焊接齿科镍铬-钴铬合金生物相容性进行体内及体外试验，包括细胞毒性试验、短期急性全身毒性试验及口腔黏膜刺激试验。

Experimental design for weld bead quality control in laser beam welding

激光焊缝质量控制的试验设计研究

The characteristics of weld acoustic signal during laser cladding were analyzed in details.

以平板激光堆焊为研究对象，详细地分析了焊接过程声信号的特征。

Laser Peening Weld Zones and Its Application on Nuclear Reactor

激光冲击处理焊接区在核反应堆上的应用

Tucked the map under his arm, into the glove compartment Dynamic response of laser-welded metallic sandwich panels subjected to underwater explosive loads

把地图夹在腋下、收藏在汽车仪表板下的贮物箱里.水下爆炸冲击载荷下激光焊接夹层板动态响应分析

Weld shaping for laser fully penetration welding titanium alloy ( II)

钛合金激光穿透焊的焊缝成形（Ⅱ）

For using powerful Co 2 laser device to weld Zr 4 alloy, the special protection device must be designed.

本文主要介绍为采用大功率二氧化碳激光器焊接锆－4合金而专门设计的保护装置。

It is considered by analysis that laser, solder ( or the matrix material for welding) and the system structure of laser micro-welding had influence on the welding speed.

分析认为，激光器本身、焊接过程中所用的钎料（或待焊接的基体材料）以及激光微焊接的系统结构对焊接的速度都有影响。

Evaluation of Biocompatibility of Laser-Welded Dissimilar Alloy in Dentistry: Co-Cr and Ni-Cr Alloy

激光焊接齿科镍铬-钴铬合金生物相容性研究

vision sensor based on laser structured light uses triangulation principle which laser structured light plane projects onto the workpiece surface at a certain angle and form feature laser stripe. a ccd camera with filter obtain laser stripe image in weld area.

基于激光结构光的视觉传感器采用三角测量原理[1,2]，激光结构光平面倾斜投射到工件表面形成特征激光条纹，一个带有滤光片的CCD摄像机采集焊缝区域激光条纹图像。

penetration status is an important criterion to evaluate the weld quality of laser-mig hybrid welding in gapped butt welding.

激光-MIG复合对接焊中，熔透状态是反映焊缝成形质量的重要指标。

study on a flying hammer bracket welded by laser-weld or some conventional techniques

调速器飞锤支架激光焊与常规工艺的试验研究