laser welding的例句大全

A Study of the Multi-sensor Real-time Monitoring System For Laser Welding

激光焊接过程多信号实时监测系统的研究

Microstructure and properties of high power laser welding of ship steel plate.

高功率激光焊接船板的组织性能。

New development of quality diagnose technology of laser welding

激光焊接质量诊断技术的最新进展

Objective To explore the basic mechanism of nerve laser welding.

目的探讨激光焊接神经的基本机制。

Research on the Laser Welding Machine for Sheet of Can

激光薄板罐身焊接机的研究

Study on Welding Mode Transition and Stability of Welding Process in Laser Welding

激光焊接时焊接模式转变规律及焊接过程稳定性的研究

Analysis and Control of Position Error in Tailored Blank Laser Welding

激光拼焊生产线定位误差分析及其控制

Laser welding technology plays an important role in automobile parts.

激光焊接技术在汽车零部件中有着极其重要的作用。

Mathematical model of the stable full penetration laser welding for titanium alloy sheet

薄板钛合金激光焊熔透稳定性临界条件的计算

Orthogonal experiment design method is used to determine the optimum laser double-side welding parameters. The tensile strength of the retro-welding samples is used as the indicators of evaluating laser welding performance. The tensile and bending fatigue test are used to study the mechanical properties of welded joint.

选用正交试验设计方法确定Fe-Mn-Si形状记忆合金激光双面焊接的最佳工艺参数，以焊接后试样的抗拉强度作为评定焊接性能的指标。

Actual thermal cycling curve of welded seam of laser welding is obtained to zinc coated high strength steel.

对激光焊接高强度镀锌钢板时接头上热循环作了试验测定，测出了焊缝热影响区的实际热循环曲线。

Study on Interface Reaction in Aluminium Matrix Composite under Laser Welding Conditions

铝基复合材料激光焊焊缝界面反应及影响因素的研究

In this paper, the influences of laser beam mode and thermal lens effect on the joints quality and the process of laser welding tin& plate was studied.

研究了薄板深熔焊（小孔效应焊）时，激光器输出模式及聚焦透镜的热效应对焊接工艺和质量的影响。

Design narrow gap groove suitable for dual beam laser welding thick plates with filler wire, guaranteed technological requirements of single pass multilayer welding and low deformation, increased neutral of wire and light to some extent.

设计了适合于厚板双光束填丝多层焊的窄间隙坡口形式，保证了厚板激光填丝焊的单道多层焊与低变形工艺要求，并一定程度上提高了丝与光对中性。

This method simplifies the process of laser welding for enameled wire and creates the conditions for automatic batch welding.

在焊接前不需要专门去除绝缘漆的过程，简化了漆包线的焊接过程，为大批量漆包线的自动化焊接创造了条件。

To guarantee good quality of butt laser welding with filler wire, a gap width detecting sensor and a wire feeding system has been designed.

本文针对高质量板材对接填丝激光焊的需要，设计了对缝间隙宽度检测的传感器与送丝控制系统。

Some weld grain characteristics show significantly layered phenomenon. The characteristics of stratification phenomenon have been explained through laser welding overlapping and flow characteristics of liquid pool metal.

部分焊缝组织晶粒特征有明显的分层现象，并通过脉冲激光焊重叠度和熔池液态金属的流动特对分层现象进行解释。

Real time diagnosis and control of laser welding quality

激光焊接质量的实时诊断和控制

In particular, YAG laser welding technique has satisfied the fiber positioning process.

尤其是采用YAG激光焊接技术，较好的解决了光纤定位工艺。

Research on Gap Width Detecting Sensor and Wire Feeding System in Butt Laser Welding With Filler Wire

填丝激光焊对接间隙宽度检测传感器与送丝系统的研究