latex的例句大全

At present we are mainly facing the industry of textile, leather, rubber& plastic products, ink, latex polymerization and handicraft products.

目前我们主要服务的工业是纺织，皮革，橡塑制品，墨水，乳液聚合及工艺品等。

Study on Hetero-coagulation of Poly ( tetrafluoroethylene) Latex Particles and Carbon Black Particles

聚四氟乙烯胶乳与碳黑粒子共凝聚行为的研究

By further increasing the film-forming temperature, the thermal movement as well as the increased solubility of stabilizer in the rubber caused the tight linking of the latex globules which decreased the swelling as well as improved the mechanical properties.

提高成膜温度，由于橡胶分子的热运动增大，同时稳定剂在橡胶中的溶解度也增加，故胶乳粒子结合比较紧密，物理性能亦相应增高。

Radiation vulcanization of natural rubber latex is investigated and the effects of ingredients of NRL, content of n BA, radiation doses and storage time on tensile strength at break of films are discussed.

研究了天然橡胶乳液的辐照硫化，探讨了橡胶乳液成分、敏化剂浓度、辐照剂量和贮藏时间对胶膜拉伸强度的影响。

The compression-strength, tensile-strength and impervious-strength of the cement concrete and so on were determined, and the effects of different industrialized SB latex products on the properties of SB/ cement concrete were examined.

实验测定了掺用工业化试验得到的水泥专用丁苯胶乳的水泥混凝土的抗压、抗拉浙江大学硕士学位论文和抗渗等性能，考察了不同水泥专用丁苯胶乳的工业化产品的影响特点。

Effect of thickening agent on heat stability of natural rubber latex;

主要进行可低温使用的改性天然橡胶配方试验。

Span of the way: during the day and the pearl powder or latex, use sunscreen and sun protection and whitening;

俺的方法就是：白天把珍珠粉和在防晒霜或乳液里用，又美白又防晒；

Studies on Acrylate Thermoplastic Elastomer with Latex Interpenetrating Polymer Network Structure

乳液互穿网络型丙烯酸酯类热塑性弹性体的研究

This article introduces the influence of dispersion, emulsion, and thickening agent on latex rheology.

主要介绍了分散、乳液、增稠剂对于乳胶涂料流变性能的影响。

Study on the thickening agent of modified CARBOXYMETHYL HYDROXYPROPYL CELLULOSE for PVA latex

改性羧甲基羟丙基纤维素作聚醋酸乙烯乳液增稠剂的研究

Comparison between damages to cotton cloth and latex glove by sterilization in prevacuum autoclave and downward displacement autoclave

预真空和下排气式压力蒸汽灭菌器对棉布和医用手套损坏的对此试验

The structure and sizes of ACR and composite latex particles were investigated through transmission electron microscopy and dynamic laser scattering method. The morphology and impact toughness of the obtained materials were characterized.

借助动态光散射法和透射电镜考察了ACR与复合乳胶粒的粒径与结构，表征了所研制材料的形态和冲击韧性。

Milk powder& Determination of titratable acidity dropping pipette straight tip with latex rubber nipple

GB/T5413.28-1997乳粉滴定酸度的测定直形管尖附乳胶头滴点管

The compressive and flexural strength of styrene-butadiene rubber ( SBR), polyacrylic ester ( PAE) and polystyrene-acrylate latex ( SAE) modified self-levelling mortars with different polymer binder ratio at different ages were compared.

研究了不同掺量的丁苯乳液（SBR）、丙烯酸酯乳液（PAE）和苯丙乳液（SAE）对自流平砂浆不同龄期下的抗压、抗折强度的影响。

The results show that under same flowability of all fresh mortars, the compressive and flexural strength of latex-modified mortars at 3 d demonstrate a parabolic shape curves with increasing the amount of the polymer.

结果表明，在新拌自流平砂浆流动度相同的条件下，3种聚合物改性砂浆的3d抗折、抗压强度随聚合物掺量的增加均表现出抛物线型变化趋势。

High solid exterior wall latex coatings are prepared of acrylate emulsion, rutile titanium pigment and micro ground chalk, resulting in lower condensing ratio after dry and higher hiding power.

采用丙烯酸酯乳液做分散介质与金红石型钛白粉和超细重钙粉等配制的高固含量外墙乳胶漆，降低了涂料干燥后的收缩率，提高了涂料的遮盖力等。

A method for the determination of Lead in synthetic resin latex dope is studied.

研究了合成树脂乳液内墙涂料中铅含量的分析方法。

Study on Thermal Aging of Peroxide Prevulcanized Natural Rubber Latex Film by FTIR

FTIR研究过氧化物预硫化天然胶乳胶膜的热老化

The Effect on Thermal Degradation of Medical Latex Product of Different Accelerant System

不同促进剂体系对医用天然胶乳制品热降解的影响

On the other hand, the latex particles were characterized by laser particle size analyzer, transmission electron microscopy, UV-VIS spectroscopy and thermal gravimetric analysis.

另一方面，通过激光粒度仪、透射电子显微镜、紫外-可见光谱、热失重分析等方式对制备的乳胶粒子进行表征。