layer material的例句大全

By designing the thickness of the insulating layer on the basis of the maximum allowable heat loss and the types of the insulating material, the efficiency of the steam pipeline can be greatly improved.

按管线允许热损失量和保温材料种类，设计保温层厚度，可大大提高输汽管线热效率。

Study about Effect of Different Material of Elasticity Cushion Layer on Spiral Case Structure of Turbine

不同弹性垫层材料对水轮机蜗壳结构的影响研究

Additionally, with the good thermal insulation actions of the enclosed air spaces and the thermal insulation material layer, the effect of thermal insulation is obviously increased.

再加上封闭空气间层和保温材料层有很好的绝热作用，绝热效果明显提高。

Deduction of Electromagnetic Parameter Matching Formula on Absorbing Material of Single Coating Layer

单涂层吸波材料电磁参量匹配解析式的推导

Secondly, the structure's mechanical model that based on the elastic material mechanical characteristic and a certain enclasped state and enclasped thinking of multi-layers' shell is established.

其次，从弹性垫层材料的力学特性角度出发，建立组合圆筒裱糊装配结构的力学模型。

Microstructure of powder metallurgy material surface layer modified by laser cladding nano-Al_2O_3

激光熔覆纳米Al2O3的粉末冶金件的表面组织

Graphene, a two-dimensional new carbon material with single atomic layer, has many unique physical and chemical properties.

石墨烯（graphene）是一种具有二维平面结构的新型碳纳米材料，它特殊的单原子层结构使其具有许多独特的物理和化学性质。

Litho process usually refers to get photolithography masking graphics accurately copy to the photo resist layer above the material.

光刻工艺通常指采用照相的方法将光刻掩模的图形精确地复印到表面的光刻胶硅片上面。

Filtration material in filtration column is double layer bed composed of sand and ceramist.

过滤柱中的滤料选用石英砂和陶粒组成的双层滤料。

The 3-layer MVC system architecture of the system is designed and the core subsystems such as material information management, purchasing management and delivery order management are designed and implemented in detail.

采购信息系统采用MVC三层架构，并利用模块化方法设计系统，对物料信息管理、采购管理、出货管理等核心子系统进行详细设计。

With the increase of the thickness of the thermal insulation layer, the cost of heat loss decreases, however the cost spent on the thermal insulation material and building will expand. Study on thermal insulation material and structure of high temperature gathering system for heavy oil

随着保温厚度的增加，热损失费用减少，但保温材料及保温层施工费用等一次性投资增加。稠油高温集输系统保温材料及结构研究

For being convenient to change the outside material face layer, the wrapping outside material can be provided with a zipper or a thread gluing device.

为方便外材面层的更换，所述包裹的外材上可以带拉链或粘扣装置。

When erosion ceased, the bed surface was observed to be covered by a thin layer of sticky material.

当冲刷停止时可以观察到床面上覆盖着一薄层粘着物质。

Results show that this protection method is reliable and the optimum thermal insulation layer thickness is related to the electric price, heating power of electric cable and the price of thermal insulation material.

研究结果表明：该防冻方案完全可靠，管道保温层经济厚度与电价、加热电缆功率设计、保温材料价格等因素有关。

The nickel and iron were selected to be original material. A multilayer structure metal film has been schemed out. This structure enhanced the interface between the films and formed nickel-iron alloy layer, thus largely increasing the temperature coefficient of the resistance.

选择镍和铁作为金属膜材料，设计了金属膜的多层状结构，此结构能够增强膜的界面效应，同时使镍铁层间形成合金层，从而对电阻温度系数的提升有重要作用。

The material for the outer layer, specification and color can be customized in accordance to clients'requirements.

外层材质，规格和颜色均可根据客户要求定做。

However, brittle material has the defect of inductile and microcrack, and its superficial layer is liable to brittle shatter because of processing method, so it is very hard to process.

然而，脆性材料具有的低塑性、易脆性破坏、微裂纹以及加工方法选择不当会引起工件表面层组织的破坏的缺点，使得脆性材料的加工十分困难。

The electroluminescent devices with a single layer structure was constructed using LaL2 ( H2O) 4Cl as the emitter material. Green-yellow electroluminescence was observed with brightness of ca. 330 cd/ m2 and a low drive voltage of 9 V.

以LaL2（H2O）4Cl的LB膜为发光层的单层电致发光器件的驱动电压为9V，发光亮度330cd/m~2，为黄绿色发光。

In addition, the big aggregate of parent material layer and bare soils had the biggest slaking index ( RSI) and the cultivated soils ranked the next place. 3.

利用方式中，母质层和荒地土壤的大团聚体消散系数（RSI）最大，其次是耕地。而小团聚体中，耕地的RSI最小。3不同测定方法获得的稳定性指标，土壤稳定性排序不同。

Through simulating working conditions of the steel tooth roller cone bit, examine wear-resisting performance of the substrate material surfaces welding layer by the impact abrasion test, an new effective way to strengthen the surface of the steel tooth roller cone bit is set up.

通过模拟钢齿牙轮钻头工作环境，用冲击磨料磨损试验实现对基体材料表面堆焊层的耐磨性检验，为钢齿钻头齿面强化探索一条更为有效的新途径。